INJORA ModuWheel 1.3" Negative Offset Brass & Aluminum Beadlock Wheels User Manual

1. Вступ і даліview

The INJORA ModuWheel 1.3" Negative Offset Brass & Aluminum Beadlock Wheels are precision-engineered components designed to enhance the performance and aesthetics of 1/18 and 1/24 scale RC vehicles. These wheels feature a modular design, combining durable brass and lightweight aluminum for optimal weight distribution and strength. The negative offset design provides a wider stance, improving stability and handling during off-road and rock crawling activities. Each wheel is CNC machined for high precision and an exquisite finish, ensuring a reliable upgrade for your RC model.

Малюнок 1: Розібраний view of the ModuWheel components, highlighting the brass and aluminum construction.

2. Налаштування та встановлення

Installing the INJORA ModuWheel beadlock wheels requires careful assembly to ensure proper tire seating and optimal performance. Follow these steps for a secure installation:

1. Підготуйте компоненти: Ensure all wheel components (inner ring, outer ring, central hub, screws) and your chosen 1.3" RC tires are clean and free of debris.
2. Вставка з піноматеріалу: If using foam inserts, carefully place them inside the tire.
3. Позиція шини: Place one side of the tire bead onto the inner ring of the wheel.
4. Align Outer Ring: Carefully align the outer ring with the inner ring, ensuring the tire bead is properly seated between them. The modular design allows for flexible assembly.
5. Закріпіть гвинтами: Insert and tighten all small screws around the perimeter of the wheel. Tighten them in a star pattern to ensure even pressure and a secure beadlock. Avoid over-tightening to prevent stripping.

3. Інструкція з експлуатації

Once properly installed, your INJORA ModuWheel beadlock wheels are ready for action. These wheels are designed for optimal performance in various RC crawling and off-roading conditions.

• Покращена стабільність: The -4.05mm negative offset provides a wider track width, significantly improving the stability of your RC vehicle on uneven terrain and during side-hilling maneuvers.
• Покращене зчеплення: When paired with appropriate 1.3" tires, the beadlock design ensures the tire bead remains securely seated, preventing tire slippage even under extreme torque and low tire pressures, maximizing traction.
• Розподіл ваги: The brass components add crucial weight to the lower part of the vehicle, lowering the center of gravity and enhancing climbing ability and overall control.

Figure 2: The ModuWheel installed on an RC truck, demonstrating its robust appearance and contribution to a wider stance.

Video 2: An RC car equipped with INJORA 1.3 ModuWheels and XHX Pin Tires navigating an obstacle course, highlighting wheel performance.

4. Технічне обслуговування

Regular maintenance will prolong the life and performance of your INJORA ModuWheel beadlock wheels.

• Прибирання: After each use, especially in dirty or wet conditions, clean the wheels to remove mud, dirt, and debris. Use a soft brush and mild soap with water, then rinse thoroughly and dry completely.
• Огляд: Periodically inspect all screws for tightness. Due to vibrations and impacts during operation, screws can loosen over time. Re-tighten as necessary. Check the wheel components for any signs of damage, cracks, or excessive wear.
• Зберігання: Store the wheels in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

5. Вирішення проблем

If you encounter issues with your ModuWheel beadlock wheels, consider the following troubleshooting steps:

• Ослаблені гвинти: If the tire feels loose or wobbles, check all beadlock screws. Tighten any loose screws using the appropriate hex driver.
• Tire Bead Not Seating Properly: If the tire bead is not holding, disassemble the wheel and tire. Inspect the tire bead and wheel rings for any obstructions or damage. Re-assemble carefully, ensuring the tire bead is fully seated before tightening the screws.
• Reduced Performance/Traction: Ensure tires are not worn out. Check if foam inserts are still providing adequate support. Verify that the wheels are securely mounted to the RC vehicle's axles.

6. Технічні характеристики

Figure 3: Dimensional diagram of the INJORA ModuWheel.

7. Гарантія та підтримка

INJORA products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the product packaging or the official INJORA webсайт.

For technical support, troubleshooting assistance, or inquiries regarding your INJORA ModuWheel beadlock wheels, please contact INJORA customer service through their official website or the retailer from whom the product was purchased. Please have your product model and purchase information ready when contacting support.