Lamicall Motorcycle Phone Mount Holder - Instruction Manual

1. Більшеview

The Lamicall Motorcycle Phone Mount Holder is designed to securely hold smartphones on motorcycle and bicycle handlebars. It features a patented dual vibration dampener to protect your phone's camera from engine vibrations and road shocks. The mount includes a metal adjustment arm for flexible positioning and a security lock for enhanced phone stability.

Ключові характеристики:

• Patented Dual Vibration Dampенер: Reduces high-frequency vibrations to protect your phone's internal components, especially the camera.
• Metal 720° Adjustment Arm: Provides extensive adjustability for optimal viewing angles, featuring two 1-inch ball heads and a safety knob.
• Anti-Theft Design & Security Lock: Equipped with special safety screws and a wrench to deter theft, along with a rear security lock to keep your phone firmly in place.
• Широка сумісність: Fits smartphones from 4.7 to 6.7 inches, with a maximum phone thickness of 0.59 inches. Compatible with handlebars ranging from 0.78 to 1.38 inches (20-35mm) in diameter.
• Shock Absorption Silicone: Cushioned rubber pads on the phone clamp and non-slip pads on the handlebar clip ensure phone protection and secure grip.

2. Інструкції з налаштування

Follow these steps to properly install your Lamicall Motorcycle Phone Mount Holder:

1. Prepare the Handlebar Clamp: Loosen the screws on the handlebar clamp component. Ensure the clamp is open enough to fit around your motorcycle or bicycle handlebar.
2. Attach to Handlebar: Розташуйте клamp on a suitable section of your handlebar. The clamp is designed for handlebars with a diameter between 0.78 and 1.38 inches (20-35mm). Tighten the screws securely using the provided wrench until the clamp is firm and does not rotate freely.
3. Connect the Adjustment Arm: Attach the metal adjustment arm to the handlebar clamp and the phone holder base. Ensure both ball heads are properly seated and the safety knob is tightened to secure the arm in place. This allows for 720-degree rotation and angle adjustment.
4. Перевірка стабільності: After installation, gently test the mount's stability by attempting to move it. It should be firmly attached to the handlebar without excessive play.

3. Інструкція з експлуатації

Вставлення телефону:

1. Ensure the security lock on the back of the phone holder is in the unlocked position.
2. Gently press the top of the phone clamp to expand the arms.
3. Place your smartphone into the holder, ensuring it is centered and the cushioned rubber pads grip the corners securely.
4. Відпустіть клamp, allowing it to automatically adjust and hold your phone firmly.
5. Engage the security lock on the back of the holder to prevent accidental release during your ride.

Видалення телефону:

1. Disengage the security lock on the back of the phone holder.
2. Press the top of the phone clamp to release the grip.
3. Carefully remove your smartphone from the holder.

Налаштування Viewкут нахилу:

The metal adjustment arm allows for 720-degree rotation. Loosen the safety knob on the adjustment arm, position your phone to the desired viewing angle (portrait or landscape), and then tighten the safety knob firmly to secure the position.

4. Технічне обслуговування

To ensure the longevity and optimal performance of your Lamicall Motorcycle Phone Mount Holder, follow these simple maintenance guidelines:

• Прибирання: Регулярно протирайте кріплення м’якою серветкоюamp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, which can damage the materials.
• Перевірте кріплення: Periodically inspect all screws and knobs to ensure they are tight. Vibrations from riding can sometimes loosen fasteners over time. Re-tighten as necessary.
• Перевірте колодки: Check the condition of the cushioned rubber pads on the phone clamp and the non-slip pads on the handlebar clamp. If they show signs of wear or damage, contact customer support for potential replacements to maintain optimal grip and protection.
• Зберігання: Якщо кріплення не використовується протягом тривалого часу, зберігайте його в чистому, сухому місці, подалі від прямих сонячних променів та екстремальних температур.

5. Вирішення проблем

Телефон нещільно прилягає:

• Check Phone Size: Ensure your phone is within the compatible size range of 4.7-6.7 inches.
• Check Phone Thickness: The maximum thickness the phone clip can hold is 0.59 inches. If your phone has a thick case, it might exceed this limit. Consider using a thinner case or removing the case if necessary. Note: The mount is not compatible with Galaxy S23 Ultra or S24 Ultra models.
• Увімкнути замок безпеки: Always ensure the security lock on the back of the holder is engaged after inserting your phone.

Mount is Loose on Handlebar:

• Verify Handlebar Diameter: Confirm your handlebar diameter is between 0.78 and 1.38 inches (20-35mm).
• Затягніть гвинти: Re-tighten the screws on the handlebar clamp using the provided wrench. Ensure they are snug but do not overtighten.
• Перевірте нековзні накладки: Ensure the non-slip pads inside the handlebar clamp are properly positioned and not damaged.

Надмірна вібрація:

• While the mount has a vibration dampener, extreme road conditions or very high engine vibrations might still cause some movement. Ensure the phone is seated correctly and the security lock is engaged.
• Огляньте damping springs for any visible damage or obstruction.

6. Технічні характеристики

Сумісні моделі телефонів (наприкладamples):

• iPhone: 17, 17e, 17 Pro, Air, 16, 16 Plus, 16 Pro, 16 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 13 series, 12 series, 11 series, SE, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, SE, 6.
• Samsung Galaxy: S10e, S10+, S10, S9+, S9, S8+, S8, S7 Edge, M20, J3 Pro, J3, E5, Core Max, C9 Pro, C8, C7 Pro, C7, C5 Pro, C5, A9s, A9 Star, A9, A8s, A8, A70, A7, A6s, A60, A50, A40S, A10, On7.
• LG: G8, G7, V60, V50 ThinQ, V40 ThinQ, V30, V20, G6, G8s ThinQ, W10, V30s+, G4 One, V30s, Q60, W30, Stylo 4, X Power, Q6+, K40, Q7, X300, Stylo 3, K8, Q7 Plus, X2, Aristo, Q7α, Q8, G5, V30 Plus, G5 SE, Stylus 2 Plus, Q6, Q6α, X Venture, X400, K10, G6+, X Screen.
• OnePlus: 10, 9, 8, 7, 6, 5T, 3T.
• Google Pixel: 7, 6, 5, 4, 3 XL, 2 XL, 3a, 3a XL, 3 Lite.
• Motorola: Z4, Z3 Play, Z2 Play, Z Play, Z Force, Z, X4, P30 Play, P30 Note, P30, P40, P50, M, G7 Power, G7 Plus, G7 Play, G7, G6 Plus, G6 Play, G5S+, G5 Plus, G5, G4 Plus, E5 Plus, E5 Play, E4 Plus, C Plus, C.
• Other: ZTE Axon 7 mini, P9, P8, HTC One M9, M8, M7, Nexus 6, 6P, 5, 4, BlackBerry.

Note: Not compatible with Samsung Galaxy S23 Ultra or S24 Ultra.

7. Інформація про гарантію

This Lamicall Motorcycle Phone Mount Holder is covered by a Гарантія від виробника 2 рікЦя гарантія поширюється на дефекти матеріалів та виготовлення за умов нормального використання. Будь ласка, збережіть чек про покупку для пред'явлення претензій за гарантією.

For warranty service or inquiries, please contact Lamicall customer support.

8. Підтримка клієнтів

For any questions, assistance, or technical support regarding your Lamicall Motorcycle Phone Mount Holder, please visit the official Lamicall webсайт або зверніться безпосередньо до їхньої служби підтримки клієнтів.

Ви також можете відвідати Lamicall Store on Amazon для отримання додаткової інформації та варіантів зв’язку.