VitalKos HY2025RX-SE JR1839 WH

VitalKos HY2025RX-SE JR1839 WH Remote Control and Receiver Instruction Manual

For Kids' Ride-On Cars

вступ

This manual provides essential instructions for the setup, operation, and maintenance of your VitalKos HY2025RX-SE JR1839 WH Remote Control and Receiver. This product is designed for use with compatible 12V kids' ride-on cars, allowing for external control of the vehicle. Please read these instructions carefully before use to ensure proper function and safety.

Фронт view of the VitalKos HY2025RX-SE JR1839 WH remote control

Зображення: спереду view of the VitalKos HY2025RX-SE JR1839 WH remote control, showing the directional and speed/brake buttons.

Налаштування

1. Перевірка сумісності

Before attempting to install or pair, ensure your ride-on car's receiver model is consistent with the HY2025RX-SE JR1839 WH remote control. Incompatibility can prevent normal operation.

Compatibility chart for JR/HY series receivers

Image: Visual guide indicating compatibility with JR/HY series receivers. Ensure your receiver matches the compatible models shown.

2. Встановлення батареї

The remote control requires two (2) 1.5V AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing correct polarity. The remote control has a memory function, so replacing batteries does not require re-pairing.

Назад view of the remote control showing battery compartment and FCC information

Зображення: Спина view of the remote control, displaying the battery compartment cover and regulatory markings.

3. Інструкції зі сполучення

Follow these steps to pair the remote control with your ride-on car:

  1. Ensure the ride-on car is powered off.
  2. На пульті дистанційного керування натисніть і утримуйте кнопку Назад (▼) and Аванс (▲) buttons simultaneously for 3 seconds. The first LED indicator on the remote will begin to flicker.
  3. While the LED is flickering, turn on the power switch of the ride-on car.
  4. The red indicator light on the remote control should stop flashing, indicating successful pairing.
  5. If pairing fails, repeat steps 2-4.

The remote control will enter standby mode if no buttons are pressed for 10 seconds. Press any key to wake it up.

Інструкція з експлуатації

The remote control allows you to operate the ride-on car with the following functions:

  • Forward (▲): Рухає машину вперед.
  • Back (▼): Рухає автомобіль назад.
  • Left (◀): Turns the car left.
  • Right (▶): Turns the car right.
  • Speed (S): Press the 'S' button to cycle through speed settings.
    • One LED lit: Low speed.
    • Two LEDs lit: Medium speed.
    • Three LEDs lit: High speed.

    Note: When moving backward, the car operates only at low speed.

  • Brake (P): Press and hold the 'P' button to engage the brake. All LED indicators will flicker while the brake is active.

The remote controller should only be used under adult guidance.

Detailed instruction sheet for JR1839FCC Remote Control

Image: A scanned instruction sheet detailing button functions and pairing steps for the JR1839FCC remote control.

Технічне обслуговування

To ensure the longevity and proper functioning of your remote control and receiver, follow these maintenance guidelines:

  • Keep the remote control and receiver clean and dry. Avoid exposure to water or excessive moisture.
  • Clean the surfaces with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the remote control in a cool, dry place away from direct sunlight when not in use.
  • Якщо пульт дистанційного керування не використовуватиметься протягом тривалого часу, вийміть батарейки, щоб запобігти їх витіканню.

Усунення несправностей

Проблеми зі сполученням

  • If the remote control fails to pair with the ride-on car, ensure the receiver model is compatible.
  • Repeat the pairing steps carefully, ensuring the car's power is turned on після the remote's LED starts flickering.
  • Перевірте батарейки пульта дистанційного керування та замініть їх, якщо необхідно.

Втручання

Цей пристрій відповідає частині 15 правил FCC. Експлуатація підлягає наступним двом умовам: (1) Цей пристрій не може створювати шкідливих перешкод і (2) Цей пристрій має приймати будь-які отримані перешкоди, включаючи перешкоди, які можуть спричинити небажану роботу.

Якщо це обладнання створює шкідливі перешкоди радіо- чи телевізійному прийому, що можна визначити, вимкнувши та увімкнувши обладнання, користувачеві рекомендується спробувати усунути перешкоди за допомогою одного або кількох із наведених нижче заходів:

  • Переорієнтуйте або перемістіть приймальну антену.
  • Збільште відстань між обладнанням і приймачем.
  • Підключіть обладнання до іншої розетки, ніж та, до якої підключено приймач.
  • Зверніться по допомогу до дилера або досвідченого радіо/телетехніка.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Технічні характеристики

МодельHY2025RX-SE JR1839 WH
БрендVitalKos
Розміри продукту5 x 4 x 1 дюймів
Вага товару6.4 унції
Рекомендований вік36 місяці - 6 років
Постачання VoltageDC 3.0V (2 x 1.5V AAA batteries)
Частота2.407 ГГц - 2.473 ГГц
Пікова вихідна потужність5dBm

Гарантія та підтримка

Specific warranty information for the VitalKos HY2025RX-SE JR1839 WH Remote Control and Receiver is not provided in this manual. For warranty details or technical support, please contact VitalKos directly through their official webсайт або роздрібний продавець, де було придбано товар.

For further assistance, you may also refer to the product listing on Amazon: VitalKos HY2025RX-SE JR1839 WH on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.