Магнітний тримач для телефону Baseus PrimeTrip C02 Go Інструкція користувача

1. Вступ

The Baseus PrimeTrip C02 Go Magnetic Phone Holder is designed to securely mount your smartphone in your vehicle. It features a powerful magnetic attraction and an upgraded 3M adhesive for stable installation on various flat surfaces within your car. This manual provides instructions for proper installation, operation, and maintenance of your device.

Зображення 1.1: закінченоview of the Baseus PrimeTrip C02 Go Magnetic Phone Holder. The holder is black with a sleek, curved design, featuring a circular magnetic head and a base with a textured surface for dashboard placement.

2. Вміст упаковки

Будь ласка, перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:

• 1 x Baseus C02 Car Mount
• 2 x 3M Adhesive Tapes (one pre-applied, one spare)
• 1 x Metal Ring (for non-MagSafe compatible phones)
• 1 x Metal Sticker (for attaching the metal ring)
• 1 x Alcohol Pad (for surface preparation)
• 1 х посібник користувача

3. Інформація про безпеку

• Ensure the phone holder is securely mounted and does not obstruct your view of the road or interfere with vehicle controls (e.g., airbags, dashboard indicators).
• Do not install the holder in a location that could become a projectile hazard in the event of an accident.
• Avoid adjusting the holder or your phone while driving. Make all adjustments before starting your journey.
• Keep the magnetic holder away from sensitive electronic devices that may be affected by magnetic fields.

4. Налаштування та встановлення

Follow these steps for optimal installation of your Baseus PrimeTrip C02 Go Magnetic Phone Holder:

1. Виберіть місце монтажу: Select a flat, clean surface on your dashboard, center console, or windshield. Ensure the chosen location does not obstruct your driving view або елементи керування транспортним засобом.
2. Очистіть поверхню: Use the provided alcohol pad to thoroughly clean the chosen mounting surface. Allow it to dry completely before proceeding.
3. Apply the Holder: Peel off the protective film from the 3M adhesive tape on the base of the holder. Firmly press the holder onto the cleaned surface for at least 30 seconds.
4. Дозволити адгезію: For maximum adhesion, allow the 3M adhesive to cure for 24 hours before attaching your phone.
5. Для телефонів без MagSafe: If your phone or phone case is not MagSafe compatible, attach the included metal ring to the back of your phone or phone case using the metal sticker. Ensure it is centered for optimal magnetic connection.

Image 4.1: The phone holder securely installed on a car dashboard, demonstrating its stable placement and the strong 3M VHB tape adhesion, capable of holding up to 1.8kg.

5. Інструкція з експлуатації

Once installed, operating your phone holder is straightforward:

1. Підключення телефону: Simply bring your MagSafe-compatible phone (or phone with the metal ring attached) close to the magnetic head of the holder. The powerful magnets will securely snap your phone into place.
2. Налаштування Viewкут нахилу: The holder features a 360° rotatable magnetic head, allowing you to switch between portrait and landscape modes. The arm also allows for 180° up and down adjustment to achieve your desired viewкут.
3. Від’єднання телефону: Обережно потягніть телефон з магнітної головки, щоб від'єднати її.

Image 5.1: The phone holder demonstrating its 360-degree rotation capability, allowing the phone to be positioned in both landscape and portrait orientations for optimal viewінж.

Image 5.2: An illustration showing the powerful magnetic attraction of the holder, capable of securely holding a smartphone even on bumpy roads with up to 18N of force.

6. Сумісність

The Baseus PrimeTrip C02 Go Magnetic Phone Holder offers wide compatibility:

• MagSafe Compatible Devices: Directly compatible with iPhone 15/14/13/12 Pro Plus Max Mini series and other MagSafe-enabled devices or cases.
• Universal Smartphone Compatibility: For all other smartphones, including Samsung, Huawei, Xiaomi, Redmi, HTC, Blackberry, Google Pixel, Sony, LG, OnePlus, Motorola, ZTE, etc., use the included metal ring for magnetic attraction.
• Сумісність з автомобілем: Applicable to all cars, installable on any flat surface such as the dashboard, center console, or windshield.

Image 6.1: The phone holder positioned in front of various car models, illustrating its wide compatibility and suitability for installation in any vehicle.

7. Технічне обслуговування

To ensure the longevity and optimal performance of your phone holder:

• Clean the holder regularly with a soft, dry cloth to remove dust and debris.
• Уникайте використання агресивних хімікатів або абразивних засобів для чищення, оскільки вони можуть пошкодити матеріал.
• If the adhesive needs to be replaced, use the spare 3M adhesive tape provided in the package. Ensure the surface is clean and dry before applying new adhesive.

8. Вирішення проблем

• Issue: Phone not holding securely.
  рішення: Ensure your phone is MagSafe compatible or has the metal ring properly attached and centered. Check for any obstructions between the phone and the holder.
• Issue: Adhesive not sticking.
  рішення: Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application. Press firmly for at least 30 seconds and allow 24 hours for the adhesive to cure. If issues persist, use the spare 3M adhesive tape.
• Issue: Holder feels loose.
  рішення: Re-check the adhesive bond. If necessary, remove the holder, clean the surface, and reapply with a new 3M adhesive tape.

9. Технічні характеристики

10. Гарантія та підтримка

Щоб отримати інформацію про гарантію або технічну підтримку, зверніться до гарантійного талона, що додається до вашого продукту, або відвідайте офіційний веб-сайт Baseus. website. You may also contact Baseus customer service directly for assistance.