Zerone S866 Electric LCD Display Panel User Manual

1. Вступ

Thank you for choosing the Zerone S866 Electric LCD Display Panel. This manual provides essential information for the proper installation, operation, and maintenance of your new display. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Малюнок 1.1: Спереду view of the Zerone S866 Electric LCD Display Panel, showing the screen and control buttons.

2. Особливості продукту

• Легке керування: Quick key functionality allows for straightforward control and parameter adjustment.
• Проста установка: Includes an LCD bracket for easy mounting on standard 22.2mm handlebars.
• Чіткий дисплей: Provides clear status and data information with a backlight feature for visibility in low-light conditions.
• Широкий Voltage Сумісність: Supports 24V, 36V, 48V, and 60V electric bike systems.
• Міцний дизайн: Constructed from lightweight and robust ABS material, resistant to daily impacts.

3. Технічні характеристики

4. Вміст упаковки

Будь ласка, перевірте наявність та належний стан усіх предметів після відкриття упаковки:

• 1 x Zerone S866 Electric LCD Display Panel
• 1 x Інструкція з експлуатації (цей документ)

5. Налаштування та встановлення

Follow these steps to properly install your Zerone S866 LCD Display Panel on your electric bicycle:

1. Prepare Handlebars: Ensure the handlebar area where you intend to mount the display is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. Встановлення дисплея: Use the included bracket to securely attach the S866 display to your handlebar. Tighten the screws firmly but do not overtighten to avoid damage.


Figure 5.1: The S866 display panel shown mounted on bicycle handlebars, ready for connection.

3. Підключіть проводку: Carefully connect the display's cable to the corresponding port on your electric bicycle's controller or wiring harness. Ensure the connectors are fully seated and secure. Refer to your electric bike's wiring diagram if unsure.


Малюнок 5.2: Задня частина view of the S866 display, highlighting the integrated connection cable.

4. Управління кабелем: Route the cable neatly along your bike frame and secure it with cable ties to prevent snagging or damage during riding.
5. Початкове увімкнення: Once installed and connected, power on your electric bike. The display should illuminate and show initial data.

6. Інструкція з експлуатації

The Zerone S866 LCD Display Panel provides clear information and easy control over your electric bike's functions.

Малюнок 6.1: Збільшений план view of the S866 display, showing the digital speed, battery indicator, assist level, and trip distance.

6.1. Функції кнопок

• Кнопка живлення (ⓘ):
  • Press and hold to turn the display ON/OFF.
  • Short press to cycle through display modes (e.g., Odometer, Trip Distance).
• Кнопка вгору (+):
  • Short press to increase assist level or navigate menu options upwards.
  • Long press (in certain modes) for specific functions (e.g., headlight control, if supported by your bike's controller).
• Кнопка вниз (-):
  • Short press to decrease assist level or navigate menu options downwards.
  • Long press (in certain modes) for specific functions.

6.2. Відображення інформації

РК-екран відображає дані в режимі реального часу:

• швидкість: Поточна швидкість руху (км/год або миль/год).
• Рівень заряду батареї: Graphical indicator showing remaining battery charge.
• Рівень допомоги: Current pedal assist level (e.g., 0-5).
• Відстань подорожі: Distance covered during the current ride.
• Одометр: Total distance covered by the bike.
• Коди помилок: Displays specific codes if a system error occurs.

6.3. Налаштування параметрів

The display allows for basic parameter adjustments. Typically, this involves entering a settings menu by holding a combination of buttons (e.g., Up and Down simultaneously) for a few seconds. Common adjustable parameters may include:

• Unit System (km/h vs. mph)
• Діаметр колеса
• Акумулятор Voltage Налаштування

Note: Specific parameter adjustment procedures may vary slightly. Refer to your electric bike's main controller manual for advanced settings.

7. Технічне обслуговування та догляд

To ensure the longevity and proper functioning of your Zerone S866 LCD Display Panel, follow these maintenance guidelines:

• Прибирання: Протріть екран дисплея та корпус м’якою губкоюamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they can damage the plastic and screen.
• Вплив води: While the display has an IP65 waterproof rating, avoid submerging it in water or exposing it to high-pressure water jets (e.g., from a power washer). Dry any moisture promptly.
• температура: Avoid exposing the display to extreme temperatures, both hot and cold, for extended periods.
• Вплив: Protect the display from physical impacts and drops, which can cause internal or external damage.
• Підключення: Періодично перевіряйте з'єднання проводів, щоб переконатися в їх надійності та відсутності корозії.

8. Вирішення проблем

If you encounter issues with your Zerone S866 LCD Display Panel, try the following troubleshooting steps:

If these steps do not resolve the issue, please contact Zerone customer support or your electric bike dealer for further assistance.

9. Гарантія та підтримка

For specific warranty information regarding your Zerone S866 Electric LCD Display Panel, please refer to the warranty card included with your purchase or contact the seller directly. Zerone is committed to providing quality products and customer satisfaction.

For technical support or inquiries, please visit the official Zerone store on Amazon or contact their customer service channels as provided at the point of purchase.

Zerone Store Link: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669