CREWORKS 2L Digital Ultrasonic Cleaner (Model SX-DUCBK02US) Instruction Manual

1. Важливі інструкції з техніки безпеки

Please read and understand all safety instructions before operating the CREWORKS Ultrasonic Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Не розбирайте: Never attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.
• Do not use unattended: Always supervise the unit during operation.
• Always use sufficient fluid: Ensure the cleaning tank is filled with an appropriate amount of cleaning solution before turning on the unit. Operating without fluid can damage the transducer.
• Unplug before filling & draining: Always disconnect the power cord from the outlet before adding or removing cleaning solution from the tank.
• Електрична безпека: Do not immerse the main unit in water or other liquids. Keep the power cord away from heated surfaces.
• Теплова безпека: The heating function can make the tank and solution hot. Exercise caution to prevent burns.
• Вентиляція: Operate the unit in a well-ventilated area, especially when using certain cleaning solutions.

This image displays the CREWORKS 2L Digital Ultrasonic Cleaner, highlighting the control panel and the yellow warning label with key safety reminders.

2. Продукт закінчивсяview

The CREWORKS 2L Digital Ultrasonic Cleaner utilizes high-frequency sound waves to create cavitation bubbles in a liquid, providing thorough cleaning for various items. It features a digital control panel for precise settings, a heating function, and specialized modes for optimal cleaning.

2.1 Компоненти

• Основний блок: Houses the ultrasonic transducer, heating element, and control circuitry.
• Бак з нержавіючої сталі: 2-liter capacity, made from durable 304 stainless steel.
• Кришка: Helps contain sound and prevent evaporation.
• Кошик для прибирання: Designed to hold items during cleaning, preventing them from resting directly on the tank bottom.
• Шнур живлення: Для підключення пристрою до електричної розетки.

2.2 Основні характеристики

• Цифрова панель керування: Intuitive interface for setting time and temperature.
• Degas Mode: Removes dissolved gases from the cleaning solution, enhancing cavitation efficiency and preventing oxidation.
• Ніжний режим: Reduces ultrasonic power for cleaning delicate items, protecting fragile surfaces.
• Функція нагріву: Accelerates the cleaning process by warming the solution (adjustable from 68°F to 176°F).
• Таймер: Adjustable cleaning cycles up to 99 minutes.
• Міцна конструкція: 304 stainless steel tank and basket for longevity and corrosion resistance.

This image illustrates the key internal and external features of the ultrasonic cleaner, including the user-friendly digital control panel, the robust stainless steel tank, safety fuses, and ventilation holes for reliable performance.

This graphic demonstrates the robust construction of the cleaning tank, highlighting the use of food-grade 304 stainless steel for durability, corrosion resistance, and a thickness of 0.04 inches.

3. Налаштування

1. Розпакувати: Обережно вийміть ультразвукову ванну та всі аксесуари з упаковки. Перевірте на наявність будь-яких пошкоджень.
2. Розміщення: Place the unit on a stable, level, and dry surface. Ensure adequate ventilation around the unit.
3. Заправити бак: Ensure the unit is unplugged. Fill the stainless steel tank with an appropriate cleaning solution. The liquid level should be between the MIN and MAX marks (if present), or at least cover the items to be cleaned. Do not overfill.
4. Підключіть живлення: Вставте шнур живлення в заземлену електричну розетку.

4. Інструкція з експлуатації

The digital control panel allows for precise control over cleaning parameters.

4.1 Панель керування надview

The control panel features digital displays for temperature and time, along with buttons for power, temperature adjustment, Degas mode, Gentle mode, and time adjustment.

• Кнопка живлення: Вмикає/вимикає пристрій.
• Кнопка TEMP: Activates/deactivates the heating function. Use the up/down arrows to adjust the target temperature.
• DEGAS Button: Activates the Degas mode.
• GENTLE Button: Activates the Gentle mode.
• Кнопка TIME: Activates/deactivates the ultrasonic cleaning function. Use the up/down arrows to adjust the cleaning duration.

4.2 Основна операція

1. Підготуйте елементи: Place items to be cleaned into the cleaning basket. Ensure items are not touching each other or the bottom of the tank directly.
2. Розмістити кошик: Carefully lower the basket with items into the cleaning solution.
3. Увімкнення: Натисніть кнопку живлення, щоб увімкнути пристрій.
4. Встановлення температури (необов'язково): If heating is desired, press the TEMP button and use the up/down arrows to set the target temperature (68°F to 176°F). The unit will begin heating. Allow time for the solution to reach the desired temperature.
5. Degas the Solution (Recommended): For optimal cleaning, especially with fresh solution, press the DEGAS button. This removes air bubbles from the solution, improving cavitation. Run Degas mode for 5-10 minutes.
6. Встановити час прибирання: Press the TIME button and use the up/down arrows to set the desired cleaning duration (1 to 99 minutes).
7. Почати очищення: The ultrasonic cleaning will start automatically after setting the time. The timer will count down.
8. Gentle Mode (Optional): If cleaning delicate items, press the GENTLE button to reduce the ultrasonic intensity. This can be activated before or during a cleaning cycle.
9. Кінець циклу: The unit will stop automatically when the timer reaches zero.
10. Видалити елементи: Unplug the unit. Carefully lift the basket out of the tank. Rinse cleaned items with clean water and dry them thoroughly.

This image illustrates how Degassing Mode removes gases from the tank to prevent oxidation and enhance cleaning, and how Gentle Mode effectively reduces cleaning intensity to protect delicate items by modifying sound pressure waves.

5. Технічне обслуговування

Правильне обслуговування забезпечує довговічність та оптимальну роботу вашої ультразвукової ванни.

• Злив: Always unplug the unit before draining the cleaning solution. Use the drain valve (if present) or carefully pour out the solution.
• Очищення бака: After each use, rinse the stainless steel tank with clean water. Wipe the interior and exterior with a soft cloth. Do not use abrasive cleaners or scrubbers.
• Зовнішнє очищення: Протріть зовнішню частину пристрою рекламоюamp тканиною. Уникайте потрапляння води на панель керування або електричні компоненти.
• Зберігання: Store the unit in a cool, dry place with the lid slightly ajar to allow for air circulation.
• Заміна розчину: Replace cleaning solution regularly, especially if it becomes visibly dirty or its cleaning effectiveness diminishes.

6. Вирішення проблем

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact CREWORKS customer support.

7. Технічні характеристики

This image provides a visual representation of the unit's overall dimensions, the internal tank dimensions, and the cleaning basket dimensions, aiding in understanding the product's physical specifications.

8. Гарантія та підтримка

CREWORKS provides a 1-Year Promise for this ultrasonic cleaner, ensuring quality and reliability. For any questions, technical assistance, or warranty claims, please contact our Обслуговування клієнтів 24/7.

Please refer to your purchase documentation or the official CREWORKS webсайт для отримання конкретної контактної інформації та детальних гарантійних умов.