iFlight 5.8Ghz 40CH 2.5W/ 4.9Ghz 8CH 2.5W 2-8S VTX BWhoop

1. Продукт закінчивсяview

опис

The iFlight BLITZ Whoop VTX is a high-power video transmitter designed for FPV drones and quadcopters. It features a built-in microphone, multiple power levels up to 2500mW, and supports 2-8S VBAT input. The VTX includes an integrated cooling fan and CNC cooling casing for efficient heat dissipation. It utilizes an MMCX interface and has a 25.5x25.5mm mounting pattern. Control is managed via LED indicators and function buttons for power level, band, and channel selection, with IRC Tramp telemetry support.

Ключові характеристики

• Built-in microphone for audio transmission.
• Вхідний обtage range: 7V to 34V (2-8S VBAT).
• Four selectable power levels: PIT/25mW/400mW/1000mW/2500mW.
• 8 channels for 4.9Ghz and 40 channels for 5.8Ghz operation.
• CNC cooling casing with integrated cooling fan for dual heat dissipation.
• Інтерфейс антени MMCX.
• Compact dimensions: 50*30*16 mm, Lightweight: 32g.
• VTX telemetry: IRC Tramp.

Що в коробці

• 1 x BLITZ Whoop 4.9G 2.5W VTX
• Необхідні джгути проводів
• Кріпильні гвинти

Figure 1.1: The iFlight BLITZ Whoop VTX module with its antenna cable, mounting screws, and wiring harnesses.

2. Важлива інформація з безпеки

УВАГА: The VTX is set to 25mW by default. Power levels above 25mW require a HAM license or must be approved by local authorities. Always ensure you are flying legal frequencies and use the appropriate Betaflight VTX tables according to your region's regulations.

• Always read the instructions for proper wiring before connecting the VTX. Incorrect wiring can cause damage.
• Ensure the antenna is properly installed before powering on the VTX. Operating without an antenna can significantly shorten the module's lifespan.
• Перевірте правильний томtage range (7-34V DC) and polarity (positive/negative) before applying power to prevent component damage.
• When installing the VTX, ensure sufficient space around the module for air convection to facilitate proper heat dissipation.
• Failure to provide adequate cooling may cause the module to activate overheat protection, leading to reduced power transmission or complete shutdown.

3. Посібник із налаштування

Wiring and Port Connections

The BLITZ Whoop VTX features clearly labeled ports for easy integration into your FPV system. Refer to the diagram below for correct connections.

Малюнок 3.1: Нижня частина view of the VTX showing port connections.

Монтаж

The VTX has a mounting pattern of 25.5x25.5mm with Φ1.6mm holes. Ensure secure mounting using the provided screws. It is crucial to leave adequate space around the VTX for air circulation to allow the integrated cooling fan and CNC casing to dissipate heat effectively. This prevents the VTX from entering overheat protection mode.

4. Інструкція з експлуатації

Функціональність кнопки живлення

The VTX features a 'Power' button to control its output power and PIT mode. Refer to the image below for button location.

Малюнок 4.1: Сторона view of the VTX showing the 'Band/CH' and 'Power' buttons.

• Натисніть і утримуйте протягом 2 секунд: Enters or exits PIT mode. A solid green LED light indicates that PIT mode is active.
• Коротке натискання: Changes the output power level. The number of green LED flashes indicates the current power setting:
  
  • 1 flash = 25mW
  • 2 flashes = 400mW
  • 3 flashes = 1000mW
  • 4 flashes = 2500mW

Band and Channel Button Functionality

The 'Band/CH' button allows you to cycle through the available bands and channels. Refer to Figure 4.1 for button location.

• Коротке натискання: Switches the channel. The number of blue LED flashes indicates the current channel (1 to 8 for 4.9Ghz, or 1 to 40 for 5.8Ghz depending on the selected band).

VTX Telemetry (IRC Tramp)

The BLITZ Whoop VTX supports IRC Tramp telemetry, allowing you to configure VTX settings directly from your flight controller's OSD (On-Screen Display) or Betaflight configurator. Connect the IRC pin on the VTX to a UART TX pad on your flight controller and configure the UART for VTX (Tramp) protocol in Betaflight.

5. Технічні характеристики

6. Технічне обслуговування

To ensure the longevity and optimal performance of your iFlight BLITZ Whoop VTX, follow these maintenance guidelines:

• Тримати в чистоті: Regularly inspect the VTX for dust, dirt, or debris, especially around the cooling fan and heatsink fins. Use a soft brush or compressed air to gently clean these areas.
• Забезпечте належне охолодження: Always ensure that the VTX has adequate airflow during operation. Avoid enclosing it in tight spaces without ventilation, as this can lead to overheating and performance degradation.
• Підключення антени: Periodically check the MMCX antenna connection to ensure it is secure. A loose connection can lead to poor video quality and potential damage to the VTX.
• Перевірте проводку: Before each flight, visually inspect all wiring connected to the VTX for any signs of wear, fraying, or damage. Replace any damaged wires immediately.

7. Вирішення проблем

This section addresses common issues you might encounter with your iFlight BLITZ Whoop VTX.

8. Гарантія та підтримка

For warranty information, please refer to the official iFlight webсайт або зверніться до місця придбання. Гарантійні умови зазвичай поширюються на виробничі дефекти протягом певного періоду з дати покупки.

For technical support, troubleshooting assistance beyond this manual, or to inquire about spare parts, please visit the official iFlight support channels or their Amazon store page:

Visit the iFlight Store on Amazon

Please have your product model number (BLITZ Whoop VTX) and purchase details ready when contacting support.

9. Офіційні відео про продукт

No official product videos from the seller were provided for this manual. Please check the product listing or the manufacturer's official webсайт для будь-яких доступних відеоресурсів.