TRU Hydration Blender User Manual

вступ

Thank you for choosing the TRU Hydration Blender. This mini personal blender is designed for ultimate convenience, allowing you to create delicious smoothies, shakes, and protein drinks wherever you are. Its single-button operation and USB rechargeable battery make it an ideal companion for a healthy, on-the-go lifestyle. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new blender.

Важливі інструкції з безпеки

Please read all instructions carefully before using the TRU Hydration Blender. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the lid is securely fastened before operating the blender.
• Do not immerse the motor base (lid with integrated blade) in water or other liquids. Clean with a damp тільки тканина.
• Keep hands and utensils out of the blending cup while blending to prevent injury.
• Do not blend hot liquids, as pressure buildup may cause the lid to eject and result in burns.
• Avoid blending hard ingredients such as whole nuts, coffee beans, or frozen solid fruits without sufficient liquid, as this may damage the blades or motor.
• Цей прилад не призначений для використання особами (включаючи дітей) з обмеженими фізичними, сенсорними чи розумовими здібностями, або з браком досвіду та знань, якщо вони не перебувають під наглядом або не отримали інструкції щодо використання приладу особою, відповідальною за їх безпеку.
• Використовуйте лише кабель для зарядки USB, що додається.
• Unplug the blender from the power source when not in use, before assembling or disassembling parts, and before cleaning.

Продукт закінченийview

The TRU Hydration Blender consists of three main components designed for easy assembly and use.

малюнок 1: Assembled TRU Hydration Blender, showing the cup, lid, and base. The cup contains pineapple chunks.

малюнок 2: TRU Hydration Blender with the lid and integrated blade assembly detached from the cup, illustrating the separate components.

Включені компоненти:

• Lid with Integrated Blade: Contains the motor, battery, control button, and blending blades.
• Blending Cup: The 10-ounce capacity container for ingredients.
• Шнур USB для зарядки: For recharging the blender's internal battery.

Налаштування

Початкова зарядка:

1. Before first use, fully charge your TRU Hydration Blender.
2. Connect the provided USB charging cord to the charging port on the lid/motor base.
3. Plug the other end of the USB cord into a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
4. The indicator light will show charging status (refer to specific light indicators in your product's quick start guide if available). A full charge typically takes 2-3 hours.
5. Once fully charged, disconnect the USB cord.

Збірка:

1. Ensure the blending cup is clean and dry.
2. Place your desired ingredients into the blending cup. Do not exceed the 10-ounce capacity fill line.
3. Align the lid with the blending cup and twist clockwise until it is securely tightened. The blender will not operate if the lid is not properly secured.

Інструкція з експлуатації

Змішування:

1. After assembling the blender with ingredients, ensure it is placed on a stable, flat surface.
2. Press the single power button located on the lid once to start the blending cycle.
3. For optimal blending, you may gently shake the blender during operation to help mix ingredients.
4. To stop blending, press the power button once again. The blending cycle will also automatically stop after a preset time (typically 30-60 seconds) to conserve battery and prevent overheating.
5. Once blending is complete, carefully unscrew the lid and enjoy your fresh beverage directly from the cup or pour into another container.

Поради для найкращих результатів:

• Cut fruits and vegetables into small pieces (approximately 1 inch or smaller) before blending.
• Always add liquid (water, milk, juice, etc.) first, followed by soft ingredients, then harder ingredients or ice.
• Do not overfill the cup beyond the 10-ounce capacity.
• For frozen fruits, allow them to thaw slightly or add sufficient liquid to ensure smooth blending.

Технічне обслуговування

Прибирання:

• Негайне очищення: After each use, rinse the blending cup and lid immediately to prevent food residue from drying.
• Очищення чашок: The blending cup can be washed with warm soapy water or placed in the dishwasher (top rack recommended).
• Lid/Blade Assembly Cleaning: DO NOT immerse the lid/blade assembly in water. Протріть зовнішню частину кришки рекламнимamp cloth. For the blades, add a small amount of water and a drop of dish soap to the cup, reattach the lid, and run the blender for a few seconds. Rinse the inside of the lid and blades carefully under running water, avoiding the charging port and control button area. Use a brush if necessary to clean around the blades.
• Перед зберіганням переконайтеся, що всі деталі повністю сухі.

Зберігання:

Store the TRU Hydration Blender in a clean, dry place away from direct sunlight and extreme temperatures. Ensure the battery is charged periodically if stored for extended periods to maintain battery health.

Усунення несправностей

Технічні характеристики

Гарантія та підтримка

TRU products are manufactured with quality and performance in mind. Specific warranty details for your TRU Hydration Blender are typically provided with your purchase documentation or can be found on the official TRU brand webсайт.

For customer support, technical assistance, or warranty claims, please refer to the contact information provided in your product packaging or visit the official TRU brand webсайт.

Інтернет-підтримка: Відвідайте магазин Tru на Amazon