Barska Pursuit-200 (BE12748)

Інструкція з експлуатації польового комплекту металошукача Barska Winbest Pursuit-200

Model: Pursuit-200 (BE12748)

Brand: Barska

1. Вступ

This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.

The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.

2. Вміст упаковки

Перевірте, чи всі перелічені нижче предмети присутні у вашій упаковці:

  • Barska Winbest Pursuit-200 Metal Detector (Main Unit)
  • Surveyor-100 Handheld Wand Metal Detector
  • Навушники
  • Folding Shovel with Compass
  • М'яка футляр для переноски
  • Посібник користувача (цей документ)
Barska Winbest Pursuit-200 Metal Detector Field Kit components

Зображення 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.

3. Налаштування

3.1. Assembling the Main Metal Detector

  1. Прикріпіть пошукову котушку: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
  2. Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
  3. Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
  4. Обмотайте кабель: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
  5. Встановіть акумулятори: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Assembled Barska Winbest Pursuit-200 Metal Detector

Зображення 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.

3.2. Preparing the Wand Detector

The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.

Barska Surveyor-100 Handheld Wand Metal Detector

Зображення 3.2: The handheld wand metal detector, showing its compact design and control buttons.

3.3. Preparing the Folding Shovel

Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.

Barska Folding Shovel in various configurations

Зображення 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.

4. Інструкція з експлуатації

4.1. Main Metal Detector Operation

Barska Pursuit-200 Metal Detector LCD control panel

Зображення 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.

  1. Увімкнення: Turn the VOLUME knob clockwise to power on the detector.
  2. Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
  3. Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
  4. Notch: Use the NOTCH function to selectively eliminate specific metal categories from detection.
  5. Навушники: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
  6. Підмітання: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
  7. Індикація цілі: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
  8. Водонепроникна пошукова котушка: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.

4.2. Wand Detector Operation

Hand holding Barska Surveyor-100 Wand Metal Detector

Зображення 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.

  1. Увімкнення: Press the Power ON/OFF button to activate the wand detector.
  2. Точне визначення: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
  3. Показання: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.

4.3. Shovel Usage

Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.

5. Технічне обслуговування

  • Прибирання: Wipe down the detector and accessories with a damp тканиною після кожного використання. Уникайте абразивних мийних засобів.
  • Зберігання: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
  • Догляд за акумулятором: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
  • Перевірка кабелю: Regularly check the search coil cable for any signs of wear or damage.

6. Вирішення проблем

проблемаМожлива причинаРішення
No power to main detector/wand detectorРозряджені або неправильно встановлені батареїЗамініть батарейки новими, дотримуючись правильної полярності.
Erratic signals or false positivesHigh sensitivity, electromagnetic interference, mineralized groundReduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings.
Detector not finding metalLow sensitivity, incorrect discrimination settings, search coil not parallel to groundIncrease sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly.
Немає звуку з навушниківHeadphones not plugged in correctly, volume too low, faulty headphonesEnsure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available.

7. Технічні характеристики

  • модель: Pursuit-200 (BE12748)
  • Бренд: Барська
  • Розмір пошукової котушки: 10 inches (Waterproof)
  • Дисплей: ЖК
  • Джерело живлення: Battery Powered (Batteries Required: Yes)
  • Регульована довжина: Yes, up to 47 inches
  • матеріал: метал
  • Вага товару: Приблизно 0.4 кілограма (14.1 унції)
  • Розміри продукту: 10"L x 9.5"W x 48.42"H (assembled)
  • Міжнародний рейтинг захисту: IP541 (for search coil)
  • Аксесуари в комплекті: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case

8. Інформація про безпеку

  • Завжди отримуйте дозвіл, перш ніж проводити обшуки на приватній території.
  • Be aware of local regulations regarding metal detecting.
  • Exercise caution when digging to avoid damaging underground utilities or historical artifacts.
  • Do not use the metal detector near live electrical wires or in hazardous environments.
  • Тримайте батарейки подалі від дітей та утилізуйте їх належним чином.

9. Гарантія та підтримка

For warranty information and customer support, please refer to the official Barska webсайт або зверніться до їхнього відділу обслуговування клієнтів. Зберігайте чек про покупку як підтвердження покупки.

Barska Official Webсайт: www.barska.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.