TEMKIN Leather Watchband User Manual

1. Вступ

This manual provides essential information for the proper installation, use, and maintenance of your TEMKIN Leather Watchband. Please read this manual thoroughly before use to ensure optimal performance and longevity of your watchband.

The TEMKIN Leather Watchband is designed for compatibility with Tissot T60 and similar watches, offering a blend of durability and classic style. This specific model features a black leather strap with a golden folding clasp, measuring 24mm at the lug end and tapering to 14mm at the clasp.

2. Продукт закінчивсяview

Figure 2.1: TEMKIN Black Golden Leather Watchband. This image displays the watchband, highlighting its black leather material with a crocodile-grain pattern and the attached golden folding clasp. The two strap pieces are shown, one with the clasp and the other with adjustment holes.

Key features of the TEMKIN Leather Watchband:

• матеріал: High-quality leather with a textured finish.
• Тип застібки: Secure folding clasp for easy wear and removal.
• Розміри: 24mm lug width, tapering to 14mm at the clasp. Band length approximately 20cm.
• Товщина: Approximately 4.5mm at the thickest point, tapering to 3mm.
• колір: Black strap with a golden clasp.

3. Встановлення та налаштування

Installing the watchband requires careful handling to avoid scratching your watch or the new strap. It is recommended to use a spring bar tool for this process.

3.1 Необхідні інструменти

• Spring bar tool (recommended)
• М'яка тканина або захисна поверхня

3.2 Етапи встановлення

1. Підготувати робоче місце: Покладіть годинник лицевою стороною вниз на м’яку чисту тканину, щоб запобігти подряпинам.
2. Remove Old Watchband (if applicable): Using a spring bar tool, locate the spring bars connecting the old watchband to the watch lugs. Gently compress the spring bar and slide the strap out. Repeat for both sides.
3. Insert New Watchband: Take one half of the new TEMKIN watchband. Insert one end of a spring bar into one of the lug holes on your watch.
4. Compress Spring Bar: Using the spring bar tool, compress the other end of the spring bar and guide it into the corresponding lug hole on the opposite side. Ensure the spring bar clicks securely into place.
5. Перевірка безпеки: Gently pull on the installed watchband to ensure it is firmly attached and the spring bars are properly seated.
6. повторити: Repeat steps 3-5 for the other half of the watchband.

4. Operating the Folding Clasp

The folding clasp provides a secure and convenient way to wear and remove your watch.

4.1 Відкриття застібки

• Locate the release buttons on the sides of the clasp.
• Press both buttons simultaneously to release the clasp mechanism. The clasp will unfold.

4.2 Закриття застібки

• Wrap the watchband around your wrist.
• Align the two ends of the clasp.
• Press down firmly on the top plate of the clasp until you hear a click, indicating it is securely locked.

4.3 Регулювання посадки

The watchband features multiple holes for length adjustment. To adjust the fit:

1. Open the folding clasp.
2. Locate the pin that secures the strap to the clasp.
3. Carefully remove the pin and reinsert it into a different hole on the strap to achieve the desired length.
4. Ensure the pin is fully seated and secure before closing the clasp.

5. Догляд і технічне обслуговування

Proper care will extend the life and appearance of your leather watchband.

• Уникайте впливу води: Leather is susceptible to damage from water. Avoid prolonged exposure to water, sweat, and high humidity. If the band gets wet, gently wipe it dry with a soft cloth and allow it to air dry naturally, away from direct heat.
• Прибирання: For light cleaning, wipe the surface with a dry, soft cloth. For deeper cleaning, use a specialized leather cleaner sparingly, following the product's instructions. Do not use harsh chemicals or abrasive materials.
• Кондиціонування: Periodically apply a small amount of leather conditioner to keep the leather supple and prevent cracking.
• Зберігання: When not in use, store the watchband in a cool, dry place, away from direct sunlight and extreme temperatures.
• Уникайте хімічних речовин: Keep the watchband away from perfumes, solvents, and other chemicals that can damage the leather or the clasp finish.

6. Вирішення проблем

7. Технічні характеристики

8. Гарантія та підтримка

Щоб отримати інформацію про гарантію або технічну підтримку, зверніться до політики продавця на платформі, де було придбано продукт. Зберігайте чек про покупку як підтвердження покупки.

For general inquiries or assistance, you may contact the manufacturer, BE LOVE, through the retailer's customer service channels.