PARKSIDE PHET 15 C2
PARKSIDE PHET 15 C2 Electric Stapler Instruction Manual
Model: PHET 15 C2
вступ
Thank you for choosing the PARKSIDE PHET 15 C2 Electric Stapler. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
Інструкції з техніки безпеки
Завжди дотримуйтесь наступних запобіжних заходів, щоб зменшити ризик ураження електричним струмом, пожежі та серйозних травм.
- Безпека на робочому місці: Тримайте робоче місце чистим і добре освітленим. Захаращені або темні місця призводять до нещасних випадків. Не використовуйте електроінструменти у вибухонебезпечних середовищах, наприклад, у присутності легкозаймистих рідин, газів або пилу.
- Електрична безпека: Вилки електроінструментів повинні відповідати розетці. Ніколи не модифікуйте вилку будь-яким чином. Не зловживайте шнуром. Ніколи не використовуйте шнур для перенесення, витягування або відключення електроінструмента від мережі. Тримайте шнур подалі від тепла, олії, гострих країв або рухомих частин.
- Особиста безпека: Завжди використовуйте засоби захисту очей. Використовуйте засоби захисту слуху під час тривалої роботи. Одягайтеся належним чином; уникайте вільного одягу або ювелірних виробів. Тримайте волосся, одяг та рукавички подалі від рухомих частин.
- Використання та догляд за інструментом: Не застосовуйте силу до електроінструменту. Використовуйте правильний електроінструмент для вашого застосування. Від’єднайте штекер від джерела живлення, перш ніж виконувати будь-які налаштування, змінювати аксесуари або зберігати електроінструменти.
- Specific Stapler Safety: Always assume the tool contains fasteners. Do not point the tool at yourself or others. Keep hands and body parts away from the discharge area. Ensure the workpiece is stable before fastening.
Продукт закінченийview
The PARKSIDE PHET 15 C2 is a lightweight and compact electric stapler designed for quick and comfortable fastening tasks. It features a non-slip soft grip for comfortable one-handed operation.

Малюнок 1: Сторона view of the PARKSIDE PHET 15 C2 Electric Stapler, highlighting its compact design and ergonomic grip. The power cord is visible at the rear.

Figure 2: The PARKSIDE PHET 15 C2 Electric Stapler displayed with a selection of compatible staples and nails, ready for use.
Ключові компоненти:
- Тригер: Активує механізм степлювачів.
- Журнал: Holds staples or nails. Features a level indicator.
- Nose/Discharge Area: Where fasteners exit the tool.
- М'яка ручка: Provides comfort and control during operation.
- Шнур живлення: Підключає інструмент до електричної розетки.
Налаштування
1. Завантаження кріплень
Ensure the tool is unplugged from the power source before loading fasteners.
- Знайдіть механізм звільнення магазину, зазвичай внизу або задній частині інструменту.
- Відкрийте журнал.
- Insert the appropriate staples (6-14 mm) or nails (14-15 mm) into the magazine. Ensure they are oriented correctly, with the points facing forward.
- Close the magazine securely until it clicks into place. The level indicator on both sides of the magazine will show the remaining fastener quantity.

Малюнок 3: Задня частина view of the stapler with the magazine open, illustrating how to load staples or nails. The red tab indicates the magazine release.
2. Підключення живлення
Once fasteners are loaded, plug the power cord into a suitable electrical outlet (230V AC, 50Hz).
Інструкція з експлуатації
The PARKSIDE PHET 15 C2 is designed for comfortable one-handed operation with its soft grip.
- Підготовка заготовки: Ensure the material you are fastening is clean, dry, and free from obstructions.
- Інструмент позиціонування: Place the nose of the stapler firmly against the workpiece at the desired fastening point. Ensure the tool is held perpendicular to the surface for optimal penetration.
- активувати: Press the trigger to drive a fastener into the material. Release the trigger to stop.
- Перевірте кріплення: Inspect the driven fastener to ensure it is properly seated. Adjust pressure or position if necessary for subsequent fastenings.

Figure 4: The electric stapler in action, securing fabric to a canvas frame. This illustrates the tool's ease of use for upholstery and crafting projects.

Figure 5: The stapler being used to attach a board, showcasing its application in general DIY and construction tasks.
Застосування:
This electric stapler is suitable for various tasks including:
- Decoration projects
- DIY crafts
- Світла оббивка
- Home repairs and fastening tasks

Figure 6: Detail of fabric securely fastened to a wooden chair frame using staples, demonstrating a typical upholstery application.
Технічне обслуговування
Regular maintenance ensures the longevity and safe operation of your electric stapler.
- Прибирання: Disconnect the tool from the power supply. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Periodically clear any dust or debris from the magazine and discharge area.
- Зберігання: Store the tool in a dry, secure location out of reach of children. Ensure the power cord is neatly coiled and not kinked.
- Огляд: Before each use, inspect the power cord for damage. Check the tool for any loose parts or signs of wear. Do not use a damaged tool.
Усунення несправностей
Зверніться до наступної таблиці, щоб дізнатися про поширені проблеми та їх вирішення.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Інструмент не працює. | Немає джерела живлення. | Перевірте, чи шнур живлення надійно підключений до справної розетки. |
| Fasteners do not drive properly. | Неправильний розмір або тип кріплення. Magazine empty. Tool not pressed firmly against workpiece. | Ensure correct staples/nails (6-14mm staples, 14-15mm nails) are used. Reload magazine. Apply firm, even pressure to the tool. |
| Застрягання застібки. | Debris in magazine or discharge area. Гнуті кріплення. | Відключіть інструмент. Open the magazine and carefully remove any jammed fasteners or debris. Use only undamaged fasteners. |
Якщо проблеми не зникають після спроби цих рішень, зверніться до служби підтримки клієнтів.
Технічні характеристики
- модель: PHET 15 C2
- Потужність: 70 Вт
- Вхідний об'ємtage: 230V змінного струму, 50Hz
- Сумісні скоби: Тип 53, 6-14 мм
- Сумісні нігті: Тип 47, 14-15 мм
- Режим роботи: Автоматичний
- особливості: Lightweight, compact, soft grip, double-sided level indicator.
- Аксесуари в комплекті: 400 x 10 mm staples, 100 x 14 mm nails.
Гарантія та підтримка
Щоб отримати інформацію про гарантію або технічну підтримку, зверніться до документації, що додається до вашої покупки, або зверніться безпосередньо до виробника. Зберігайте чек про покупку для будь-яких гарантійних претензій.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.






