Geekvape Wenax S3 EVO Vape Pen Kit User Manual

1. Вступ

The Geekvape Wenax S3 EVO Pod Kit is an advanced vaping device designed for ease of use and a satisfying experience. It features an upgraded Geekvape S Cartridge and enhanced LED indicators, offering precise control over airflow and output. This manual provides essential information for the safe and effective operation and maintenance of your device.

2. Інформація про безпеку

This product is intended for use with nicotine-free e-liquids only. It does not contain nicotine, tobacco, or any related substances. Keep out of reach of children and pets.

• Не піддавайте пристрій впливу екстремальних температур, прямих сонячних променів або води.
• Не розбирайте та не змінюйте пристрій.
• Use only the specified charging cable (Type-C) for charging.
• Утилізуйте пристрій та картриджі відповідально згідно з місцевими правилами.
• If a puff lasts longer than 10 1 2 seconds, the red light will blink 3 times, and the device will stop working (Overtime Protection).
• In case of a short circuit, the red light will blink 8 times, and the device will stop working (Short-circuit Protection).

3. Вміст упаковки

Будь ласка, перевірте вміст упаковки після розпакування:

• 1x Geekvape WENAX S3 Evo Pod Kit 1100mAh Device
• 1x Geekvape S Cartridge (2ml) (0.81, Pre-installed)

4. Продукт закінчивсяview

The Wenax S3 EVO features a compact design with intelligent indicators and versatile cartridge options.

Малюнок 4.1: Спереду view of the Geekvape Wenax S3 EVO Vape Pen Kit in black, showcasinйого елегантний дизайн та світлодіодні індикатори.

4.1 Cartridge Compatibility

The Wenax S3 EVO is compatible with the new S cartridge, which offers three different drip tip options for varied vaping experiences.

Figure 4.2: Illustration showing the compatibility of the S cartridge across different Wenax devices, including Wenax Stylus, Wenax S3 EVO, and Wenax S-C.

4.2 Upgraded Geekvape S Cartridge

The upgraded S Cartridge is fully compatible with Soft-touch Drip Tip, Filter Drip Tip, and M1 Plastic Drip Tip. It supports 0.81 (14-18W) and 1.21 (9-13W) coil resistances.

Малюнок 4.3: Детально view of the upgraded Geekvape S Cartridge, highlighting its compatibility with various drip tips and indicating the supported coil resistances.

4.3 Precise Airflow Adjustments

The device features a new airflow structure that allows for easier and more precise control of the airflow, contributing to a smoother flavor experience.

Figure 4.4: Visual representation of the airflow control mechanism on the Wenax S3 EVO, demonstrating how users can adjust it for optimal experience.

4.4 Upgraded Intelligent Indicator

The Wenax S3 EVO incorporates upgraded 3600 ring indicators, providing an intelligent and intuitive way to check the device status from any angle.

Figure 4.5: A close-up image of the device's base, showing the multi-color LED ring indicator that provides real-time status updates.

5. Налаштування

5.1 Зарядка пристрою

Before first use, fully charge the device. Connect the Type-C charging cable to the charging port located on the device and plug the other end into a suitable USB power source. The LED indicator will show charging status.

5.2 Встановлення картриджа

Insert the Geekvape S Cartridge firmly into the top of the device until it clicks into place. Ensure the cartridge is properly seated to prevent leaks and ensure proper connection.

6. Операція

6.1 Вейпінг

The Wenax S3 EVO supports both auto-draw and button-activated vaping. Simply inhale from the drip tip or press the button while inhaling to activate the device.

6.2 3-Level Output Adjustments

Quickly press the button 3 times to switch between Low (Red), Med (Blue), and High (Green) output levels. This allows you to adjust the output for different airflow levels and enjoy various flavors.

Figure 6.1: Visual guide demonstrating how to cycle through the three output levels (Low, Medium, High) using the device's button, indicated by different LED colors.

6.3 Режим посилення

Press the button to activate the maximum output for increased vapor production. This mode boosts the possibilities for flavor and vapor.

Figure 6.2: An image highlighting the button and its surrounding LED ring, illustrating the activation of Boost Mode for enhanced performance.

6.4 Battery Status Indications

The intelligent LED indicator provides clear battery status:

• Біле світло: 0-30% заряду батареї
• Синє світло: Залишок батареї 31% -69%
• Зелене світло: Залишок батареї 70% -100%

7. Технічне обслуговування

7.1 Очищення

Regularly clean the device, especially the cartridge connection area, with a dry cloth or cotton swab to prevent e-liquid buildup and ensure optimal performance.

7.2 Заміна картриджа

Replace the cartridge when you notice a burnt taste, reduced vapor production, or a change in flavor. Simply pull out the old cartridge and insert a new one.

8. Вирішення проблем

• Device not firing: Ensure the cartridge is properly installed and the battery is charged. Check for any error indications (red light blinks).
• Немає пари або слабка пара: Check e-liquid level in the cartridge. Ensure the cartridge is not clogged. Try adjusting the output level.
• Палений смак: Replace the cartridge. Ensure the cartridge is adequately primed before first use (allow e-liquid to soak for 5-10 minutes).
• Витік: Ensure the cartridge is properly seated. Avoid overfilling the cartridge.
• Захист від понаднормової роботи: If a puff lasts longer than 10 1 2 seconds, the red light will blink 3 times, and the device will stop working. This is a safety feature.
• Захист від короткого замикання: If a short circuit is detected, the red light will blink 8 times, and the device will stop working. Discontinue use and contact support if this persists.

9. Технічні характеристики

10. Гарантія та підтримка

For warranty information and customer support, please refer to the official GEEKVAPE webсайт або зверніться до продавця. Зберігайте чек про покупку для будь-яких гарантійних претензій.