TOPXCDZ WS2812B Digital Flexible Individually Addressable RGB LED Strip User Manual

1. Вступ

Thank you for choosing the TOPXCDZ WS2812B Digital Flexible Individually Addressable RGB LED Strip. This manual provides essential information for the safe and effective installation, operation, and maintenance of your LED strip. Please read this manual thoroughly before use and retain it for future reference.

2. Інформація про безпеку

• Джерело живлення: This LED strip operates exclusively on a 5 В постійного струму power supply. Using a DC 12V or DC 24V power supply will damage the product and void any warranty.
• Згинання: Do not bend the LED strip sharply. Excessive bending can damage the internal circuitry and LEDs.
• Поверхня встановлення: For models with adhesive tape (IP30/IP65), ensure the installation surface is smooth, clean, and dry to guarantee proper adhesion.
• томtage Drop: For longer runs of the LED strip, it is recommended to power the strip from both ends to minimize voltage drop and ensure consistent brightness along the entire length.
• Різання: The LED strip can be cut between every LED segment. Ensure power is disconnected before cutting.
• Водонепроникність: Refer to the product specifications for the IP rating (IP30, IP65, or IP67) to understand its level of protection against dust and water. IP30 is non-waterproof, IP65 is splash-proof, and IP67 is waterproof for temporary immersion.

3. Вміст упаковки

Пакет включає:

• 1 x WS2812B LED Strip (Length and LED density vary by model: 5m for 30/60/74/96 LEDs/m, 1m for 144 LEDs/m)

Note: Power supply and remote controller are NOT included and must be purchased separately.

4. Продукт закінчивсяview

The WS2812B LED strip features individually addressable RGB LEDs, allowing for dynamic and complex lighting effects. Each 5050 SMD RGB LED has a built-in improved version of the WS2811 IC, meaning each LED is controlled independently by a single IC. The strip supports full-color RGB and various dream color changing effects.

Image: Illustration of different LED densities (30, 60, 74, 96, 144 LEDs/m) and a coiled, illuminated WS2812B LED strip.

The strip comes with 3-pin JST-SM connectors on both ends for easy connection. Separate power and ground wires are also provided on both ends for flexible wiring options.

JST Connector Pinout:

• Червоний: VCC (+5 В)
• Білий: GND (земля)
• Зелений: DATA (Data Input)

5. Налаштування

1. Prepare the Installation Surface: If using an IP30 or IP65 strip with adhesive backing, ensure the surface is clean, dry, and smooth.
2. Вимірювання та вирізання (необов'язково): If a custom length is required, measure the desired length and cut the strip only at the designated cut lines, which are located between every LED. Ensure power is disconnected before cutting.


Зображення: Детальне view of LED strip dimensions and cut points for various LED densities.

3. Підключення джерела живлення: Connect a DC 5V power supply (not included) to the VCC (Red) and GND (White) wires of the JST connector. Ensure correct polarity.
4. Підключити контролер: Connect a suitable LED controller (not included) to the DATA (Green) wire, VCC (Red), and GND (White) wires of the JST connector. The controller sends data signals to control the individual LEDs.
5. Приклейте смужку: For IP30/IP65 strips, peel off the protective backing from the 3M adhesive tape and firmly press the strip onto the prepared surface.
6. Powering Longer Runs: If installing a long strip, consider injecting power at both ends of the strip to maintain consistent brightness and prevent color shifts due to voltage крапля.

6. Операційна

Once the LED strip is properly installed and connected to a DC 5V power supply and a compatible controller, you can begin operating it. The functionality and available lighting effects depend entirely on the controller used.

• Робота контролера: Refer to the instruction manual provided with your specific LED controller for details on how to select lighting modes, adjust brightness, change colors, and create custom effects.
• Динамічні ефекти: With a suitable controller, the WS2812B strip can produce a wide range of dynamic effects such as curtain-up, flowing water, raindrop, and jump flash patterns. Advanced users can often program custom animations using software like Flash/LedEdit.

7. Технічне обслуговування

• Прибирання: Gently wipe the surface of the LED strip with a soft, dry cloth if dust accumulates. Avoid using harsh chemicals or abrasive materials.
• Огляд: Periodically inspect the strip for any signs of damage, loose connections, or wear.
• Умови навколишнього середовища: Ensure the strip is used within its specified IP rating. For IP30 (non-waterproof) strips, avoid exposure to moisture. For IP65 (splash-proof) and IP67 (waterproof) strips, ensure seals are intact if applicable.

Image: Visual comparison of IP20, IP65, and IP67 protection levels for LED strips.

8. Вирішення проблем

• Strip Not Lighting Up:
  • Check if the power supply is DC 5V. Incorrect voltage (e.g., 12V or 24V) will prevent operation or damage the strip.
  • Verify all connections (power, ground, data) are secure and correctly polarized.
  • Ensure the controller is functioning correctly and sending data signals.
• Нестабільна яскравість або колір:
  • Це часто вказує на об'ємtage drop. For longer strips, try injecting power at both ends of the strip.
  • Ensure the power supply has sufficient wattage for the entire length of the strip.
• Individual LEDs Not Working:
  • While rare, individual LED failures can occur. If a segment is cuttable, you may replace the faulty segment.
• Strip Not Responding to Controller:
  • Confirm the controller is compatible with WS2812B ICs.
  • Check the data line connection (Green wire) for continuity and proper connection to the controller's data output.

9. Технічні характеристики

Power Consumption by LED Density:

• 30 LEDs/m: 6 Watt/meter
• 60 LEDs/m: 12 Watt/meter
• 74 LEDs/m: 14.8 Watt/meter
• 96 LEDs/m: 19.8 Watt/meter
• 144 LEDs/m: 28.8 Watt/meter

FPC Width by LED Density:

• 30 LEDs/m: 10mm
• 60 LEDs/m: 10mm
• 74 LEDs/m: 10mm
• 96 LEDs/m: 10mm
• 144 LEDs/m: 12mm

10. Гарантія та підтримка

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly through the platform where the product was acquired. Keep your purchase receipt as proof of purchase.