MOOER STEEP I

MOOER Steep I Audio Interface User Manual

Professional Recording Interface

1. Вступ

The MOOER Steep I is a high-quality audio interface designed for musicians, producers, and home recording enthusiasts. It offers support for high-resolution audio up to 24-bit/192 kHz, ensuring clear and detailed sound capture. This manual provides essential information for setting up, operating, and maintaining your Steep I audio interface.

MOOER Steep I Audio Interface in a studio setup with a guitar

Image 1.1: MOOER Steep I Audio Interface in a typical recording environment.

2. Інформація про безпеку

Будь ласка, прочитайте та зрозумійте наступні запобіжні заходи перед використанням пристрою:

  • Не піддавайте пристрій впливу дощу, вологи або екстремальних температур.
  • Уникайте розміщення пристрою поблизу джерел тепла або під прямими сонячними променями.
  • Use only the specified power supply or USB connection for power.
  • Не намагайтеся розбирати або модифікувати пристрій. Звертайтеся до кваліфікованого персоналу для проведення будь-яких технічних робіт.
  • Зберігати в недоступному для дітей місці.

3. Вміст упаковки

Перевірте наявність усіх предметів у вашій упаковці:

  • MOOER Steep I Audio Interface
  • Кабель USB-C – USB-A
  • Посібник користувача (цей документ)

4. Продукт закінчивсяview

Familiarize yourself with the various controls and connections on your Steep I audio interface.

4.1 Елементи керування передньої панелі

Топ view of MOOER Steep I Audio Interface showing input gain knobs, 48V phantom power button, direct monitor button, main out knob, and mix knob

Зображення 4.1: Верх view of the Steep I, highlighting control knobs and buttons.

  • Input Gain Knobs (1 & 2): Adjust the input level for channels 1 and 2.
  • Кнопка 48 В: Activates +48V phantom power for condenser microphones on input 2.
  • S.DRCT (Direct Monitor) Button: Engages direct monitoring, allowing you to hear your input signal directly without latency.
  • Main Out Knob: Контролює загальну гучність вихідного сигналу на студійні монітори.
  • Ручка змішування: Blends the direct input signal with the playback signal from your computer during direct monitoring.
  • LED Input Level Indicators: Provide visual feedback on input signal levels for both channels.
  • Світлодіод живлення: Вказує на стан живлення пристрою.

4.2 З'єднання бічної панелі

сторона view of MOOER Steep I Audio Interface showing headphone jack with volume control, 1/4 inch instrument/line input, and XLR/TRS combo jack for microphone/line/instrument

Зображення 4.2: Збоку view of the Steep I, showing input and headphone connections.

  • PHONES (Headphone Output): 1/4" TRS stereo jack for connecting headphones.
  • VOLUME (Headphone Volume): Rotary knob to adjust headphone output level.
  • 1 INST/LINE: 1/4" TRS mono jack for connecting instruments (guitars, basses) or line-level devices.
  • 2 MIC/LINE/INST: XLR/TRS combo jack for connecting microphones (XLR) or instruments/line-level devices (1/4" TRS).

4.3 Підключення задньої панелі

Задня view of MOOER Steep I Audio Interface showing two USB-C ports (Power and USB 2.0) and two 1/4 inch TRS Main Out jacks (L and R)

Зображення 4.3: Ззаду view of the Steep I, showing USB and main output connections.

  • POWER (USB-C): Dedicated USB-C port for power supply.
  • USB 2.0 (USB-C): USB-C port for data transfer to your computer. Can also supply power when connected to a PC.
  • MAIN OUT (L & R): Two 1/4" TRS mono jacks for connecting to studio monitors or other playback systems.

5. Налаштування

5.1 Системні вимоги

The MOOER Steep I is compatible with Windows 10 and above. It also works with Mac computers (Mini, Macbook Air) and various DAWs like ProTools, Logic Pro, and Garageband.

5.2 Підключення до комп’ютера

  1. Connect the provided USB-C to USB-A cable from the USB 2.0 port on the Steep I to an available USB port on your computer.
  2. If your computer cannot provide sufficient power, connect an external USB power adapter (not included) to the ПОТУЖНІСТЬ USB-C port on the Steep I.
  3. The Power LED on the front panel will illuminate when the device is powered on.

5.3 Встановлення драйвера

For Windows users, it is recommended to download and install the latest ASIO drivers from the official MOOER website for optimal performance and low latency. Mac users typically do not require additional driver installation as the device is class-compliant.

5.4 Підключення входів

  • Channel 1 (INST/LINE): Connect your guitar, bass, or other line-level instrument using a 1/4" TS/TRS cable.
  • Channel 2 (MIC/LINE/INST): Connect a microphone using an XLR cable, or an instrument/line-level device using a 1/4" TS/TRS cable.

5.5 Підключення виходів

  • Основні результати: Підключіть свої студійні монітори до MAIN OUT L і R 1/4" TRS jacks using appropriate cables.
  • Навушники: Підключіть навушники до ТЕЛЕФОНИ 1/4" TRS jack.

6. Операція

6.1 Увімкнення/вимкнення живлення

The Steep I powers on automatically when connected to a computer via USB or when an external power supply is connected to the POWER port. There is no dedicated power switch.

6.2 Регулювання вхідного посилення

Обертайте Input Gain Knobs (1 & 2) clockwise to increase the input level for your connected microphone or instrument. Observe the LED input level indicators to ensure your signal is strong but not clipping (peaking into the red).

6.3 Activating 48V Phantom Power

If you are using a condenser microphone with the MIC/LINE/INST (Channel 2) input, press the 48 В button to supply +48V phantom power. Ensure your microphone requires phantom power before activating this feature. Dynamic microphones do not require phantom power.

6.4 Безпосередній моніторинг

Натисніть S.DRCT button to enable direct monitoring. This allows you to hear your input signal directly through your headphones or main outputs with zero latency, which is crucial for recording. Use the Змішати knob to balance the direct input signal with the playback from your computer (e.g., backing tracks).

6.5 Моніторинг навушників

Adjust the headphone listening level using the ОБ'ЄМ knob located next to the PHONES jack.

6.6 Основний вихідний рівень

Control the overall playback volume to your studio monitors using the Основний вихід ручка.

6.7 Software Integration (DAWs)

Once connected and drivers are installed (if necessary), select the MOOER Steep I as your audio input and output device within your Digital Audio Workstation (DAW) software (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband). Refer to your DAW's manual for specific instructions on audio device selection.

Відео 6.1: Оверview of the MOOER Audio Interface, demonstrating its features and use cases.

Video 6.2: Official demonstration of the STEEP I & II Audio Interfaces, showcasing their capabilities.

7. Технічне обслуговування

7.1 Очищення

To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Ensure the unit is disconnected from power before cleaning.

7.2 Зберігання

When not in use for extended periods, store the Steep I in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent dust and damage.

8. Вирішення проблем

If you encounter issues with your MOOER Steep I, refer to the following common problems and solutions:

проблемаМожлива причинаРішення
No sound from inputsIncorrect gain setting, 48V not activated (for condenser mics), incorrect input selected in DAW, faulty cable.Adjust input gain. Activate 48V if using a condenser mic. Verify input selection in your DAW. Check cables.
No sound from outputs (monitors/headphones)Main Out/Headphone Volume too low, incorrect output selected in DAW, faulty cables, monitors/headphones not powered.Increase Main Out/Headphone Volume. Verify output selection in your DAW. Check cables and ensure monitors/headphones are powered and connected correctly.
Спотворений або шумний звукInput gain too high (clipping), driver issues, ground loop.Reduce input gain until LED indicators do not peak into red. Reinstall drivers. Try connecting to a different USB port or power outlet.
Пристрій не розпізнається комп'ютеромDriver not installed (Windows), faulty USB cable, insufficient power, incorrect USB port.Install/reinstall drivers. Try a different USB-C cable. Ensure sufficient power is supplied (use dedicated POWER port if needed). Try a different USB port on your computer.

9. Технічні характеристики

ОсобливістьСпецифікація
БрендМАУР
МодельКРУТА І
Технологія підключенняUSB-C
Кількість каналів2
Максимум Sample Rate24-біт/192 кГц
Сумісні пристроїMicrophone, Headphone, Personal Computer
Підтримуване програмне забезпеченняPopular DAWs (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband)
Операційна системаWindows 10+, macOS
Аудіо вхідXLR/TRS Combo (Channel 2), 1/4" TRS (Channel 1)
Аудіовихід1/4" TRS Main Out (L/R), 1/4" TRS Headphone Out
Вага товару0.66 кілограма

10. Гарантія та підтримка

10.1 Інформація про гарантію

MOOER products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official MOOER webсайт для отримання детальних гарантійних умов.

10.2 Технічна підтримка

For technical assistance, driver downloads, or further inquiries, please visit the official MOOER website or contact MOOER customer support through the contact information provided on their website. Ensure you have your product model (Steep I) and serial number ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.