1. Вступ
This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME Swing Ride EA02 3D Wooden Puzzle Music Box. This kit combines the challenge of a 3D puzzle with the charm of a music box, featuring LED lights and mechanical movement. Please read all instructions carefully before beginning assembly.
Figure 1: The fully assembled ROBOTIME Swing Ride EA02.
2. Інформація про безпеку
- Попередження про дрібні деталі: This kit contains small parts which may pose a choking hazard for children under 3 years old. Keep all components out of reach of young children.
- Гострі краї: Some laser-cut wooden pieces may have slightly sharp edges. Handle with care during assembly.
- Безпека батареї: This product requires 3 AAA batteries (not included). Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period.
- Рекомендований вік: This model kit is recommended for individuals aged 14 years and older due to its complexity and small components.
3. Вміст упаковки
Before starting assembly, verify that all components listed below are present in your package. Refer to the included instruction booklet for a detailed parts list and diagrams.
- Pre-cut wooden sheets (289 pieces)
- Music box mechanism
- Компоненти світлодіодного освітлення
- Ілюстрований посібник з експлуатації
- Small accessories (e.g., wires, screws, lubricant)
Примітка: 3 AAA batteries are required for operation and are не включені in the package due to shipping regulations. Please prepare these separately.
Figure 2: All components included in the ROBOTIME Swing Ride EA02 kit.
4. Інструкція зі складання
The ROBOTIME Swing Ride EA02 is designed for self-assembly. Follow the detailed, step-by-step illustrated instructions provided in your kit. Each wooden piece is laser-cut and numbered for easy identification.
- Приготування: Clear a clean, well-lit workspace. Organize the wooden sheets and identify the numbered pieces.
- Від'єднання частин: Carefully detach each piece from its wooden sheet. Use a craft knife or sandpaper if necessary to smooth any rough edges.
- Дотримуйтесь інструкцій: Assemble the model strictly according to the sequence shown in the instruction manual. Pay close attention to the diagrams and ensure all connections are secure.
- Механічні компоненти: When assembling gears and moving parts, ensure they fit smoothly. Apply the provided lubricant sparingly to designated areas as indicated in the manual to ensure optimal movement.
- Електричні компоненти: Install the LED lights and music box mechanism as directed. Ensure all wires are connected correctly.
Patience and attention to detail are key for a successful build. The estimated assembly time is approximately 6 hours.
Figure 3: Illustrates the DIY assembly process and mechanical gear transmission.
Малюнок 4: Детально view of the internal gear mechanism and elastic induction thimble.
5. Інструкція з експлуатації
Once fully assembled, your Swing Ride EA02 model can be operated as follows:
- Установка батареї: Open the battery compartment (usually located at the base) and insert 3 AAA batteries, ensuring correct polarity.
- Увімкнення/вимкнення живлення: Locate the touch switch, typically integrated into the base of the model. A gentle touch will activate the music, lights, and rotation. Touch again to turn off.
- особливості: When activated, the model will play the melody "Merry Go Round." The hollowing chairs will rotate, exhibiting a counter-rotating and centrifugal motion, while the LED lights illuminate the structure, creating a dynamic amusement park atmosphere.
Figure 5: Key operational components including hollowing chairs and power supply.
Офіційне відео продукту
Video 1: This video demonstrates the ROBOTIME 3D Puzzles DIY Music Box Kit Swing Ride in operation, showcasing its rotating chairs, lights, and music.
6. Технічне обслуговування
- Прибирання: Use a soft, dry cloth to gently wipe dust from the model. Avoid using wet cloths or harsh cleaning agents, as these can damage the wood or electronic components.
- Зберігання: Store the assembled model in a dry, cool place away from direct sunlight and excessive humidity to prevent warping or damage to the wooden pieces.
- Заміна батареї: Replace batteries when the lights dim or the music/motion becomes weak. Always replace all batteries at once.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Не працює світло або музика | Dead or incorrectly installed batteries; loose wire connection. | Check battery polarity and replace if necessary. Inspect wire connections for tightness. |
| Rotation is sluggish or stops | Insufficient lubrication; obstruction in gears; low battery power. | Apply lubricant to gears as per assembly instructions. Check for any foreign objects. Replace batteries. |
| Частини не стикуються | Incorrect piece orientation; burrs on edges. | Refer to the instruction manual diagrams. Gently sand edges if needed. Do not force pieces. |
Якщо у вас виникли проблеми, не перелічені тут, або якщо рішення не вирішують проблему, зверніться до служби підтримки клієнтів.
8. Технічні характеристики
- Бренд: ROBOTIME
- модель: EA02 (Swing Ride)
- матеріал: Дерево, Пластик
- Кількість штук: 289
- Розміри у зібраному вигляді (Д х Ш х В): Приблизно 5.9 x 5.9 x 10.6 дюйма (15 x 15 x 27 см)
- Вага товару: 0.74 кілограма
- Рівень навичок: Проміжний
- Навчальна мета: Concentration Skill, Patience Skill, Problem Solving Skill
- Джерело живлення: 3 батареї AAA (не входять в комплект)
Figure 6: Dimensions and piece count of the ROBOTIME Swing Ride EA02.
9. Гарантія та підтримка
ROBOTIME products are manufactured with quality and precision. If you encounter any issues with your Swing Ride EA02 kit, such as missing or broken parts, or require assistance with assembly or operation, please contact ROBOTIME customer service. Refer to the contact information provided in your product packaging or visit the official ROBOTIME webсайт для підтримки.