вступ
This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your AMZCNC 5 Ton Hydraulic Gear Puller. Please read this manual thoroughly before operating the tool to ensure proper function and prevent injury or damage.
Інформація про безпеку
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the hydraulic gear puller.
- Ensure the workpiece is securely mounted and stable before applying force.
- Do not exceed the maximum rated capacity of 5 tons. Overloading can cause tool failure and injury.
- Inspect the tool for any damage or wear before each use. Do not use if components are damaged.
- Тримайте руки та інші частини тіла подалі від рухомих частин під час роботи.
- Після використання повільно та обережно скидайте гідравлічний тиск.
- Store the tool in a clean, dry place away from children and unauthorized users.
Image: AMZCNC Hydraulic Gear Puller showing key specifications and a caution regarding jaw engagement for various applications like crawler wheels, car wheels, and gears.
Продукт закінченийview і компоненти
The AMZCNC 5 Ton Hydraulic Gear Puller is designed for efficient removal of hubs, flanges, gears, pulleys, flywheels, and bearings from shafts. It features adjustable jaws for versatile application.
Що в коробці:
- Hydraulic Puller Unit
- Операційна ручка
- Leg Puller Yoke
- Three Jaws
- Six Link Plates
- Six Screw Sets
Image: The AMZCNC Hydraulic Gear Puller kit, including the main unit, handle, jaws, and accessories, neatly organized in a carrying case.
Технічні характеристики
| Параметр | Значення |
|---|---|
| Номер моделі | JH-5T (5Ton 8"jaw) |
| Max. Capacity (Force) | 5 тонни (11000 фунтів) |
| Jaw Size (Spread) | Approx. 8" (200mm) |
| Макс. Досяжність | Approx. 5.5" (140mm) |
| Axial Travel (Advance Stroke) | Approx. 2" (50mm) |
| Maximum Open Jaw | Φ13" (330mm) |
| Applicable Bearing Model | 300-2307 |
| матеріал | High strength 45# carbon steel (pump), alloy steel (jaws) |
| Вага товару | 16.15 фунта |
| Розміри упаковки | 16.93 x 12.44 x 3.58 дюймів |
Налаштування
Before operation, ensure the puller is correctly assembled for your specific task. The puller can be configured with either two or three jaws.
- Select Jaw Configuration: Determine if a two-jaw or three-jaw setup is suitable for the item to be pulled.
- Attach Jaws: Install the selected jaws onto the leg puller yoke. For a three-jaw setup, fix the claws at positions 1, 2, and 3 of the claw plate. For a two-jaw setup, fix the claws at positions 'a' and 'b' of the claw plate.
- Secure Jaws: Rotate the jaws clockwise along the threads to secure them.
- Mounting Claw: Ensure the mounting claw is properly engaged with the workpiece.
- Регулювальна гайка: Adjust the nut until it is snug but allows for movement.
- Ручка кріплення: Attach the operating handle to the hydraulic pump.
Image: Diagrams illustrating how to configure the puller with two or three jaws, including approximate spread and reach dimensions for maximum opening.
Image: A seven-step visual guide demonstrating the assembly process, from installing jaws to mounting the handle and preparing for operation.
Інструкція з експлуатації
The hydraulic gear puller is designed for pulling hubs, flanges, gears, pulleys, flywheels, and bearings. It can be operated horizontally or vertically.
- Розташування знімача: Place the puller so that the jaws securely grip the component to be removed. Ensure the center screw is aligned with the shaft.
- Tighten Oil Return Switch: Locate the oil return switch on the hydraulic pump and tighten it clockwise to close the valve.
- Ручка керування: Pump the operating handle to build hydraulic pressure. The pressure will extend the ram, pushing the component off the shaft.
- Моніторинг прогресу: Continue pumping until the component is safely removed. Avoid excessive force.
- Тиск скидання: Once the component is removed, slowly turn the oil return switch counter-clockwise to release the hydraulic pressure and retract the ram.
- Remove Puller: Carefully remove the puller from the workpiece.
Video: Demonstration of a hydraulic gear puller in action, showing the process of removing a pulley from a shaft. While this video features a 10-ton model, the operational principles are similar for the 5-ton unit.
Зображення: Прamples of common applications for the hydraulic gear puller, such as vehicle repair, equipment maintenance, and general gear removal tasks.
Технічне обслуговування
- Прибирання: After each use, clean the puller components to remove dirt, grease, and debris.
- Змащення: Periodically apply a light coat of oil to the threaded parts and moving joints to prevent rust and ensure smooth operation.
- Огляд: Regularly inspect the jaws, ram, and hydraulic cylinder for signs of wear, cracks, or damage. Replace any worn or damaged parts immediately.
- Гідравлічна рідина: Check the hydraulic fluid level periodically. If low, refill with appropriate hydraulic oil. Consult a qualified technician if you suspect a leak.
- Зберігання: Store the puller in its original case or a dry, secure location to protect it from environmental elements and prevent damage.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Puller not generating force | Oil return switch open; Low hydraulic fluid; Air in system | Ensure oil return switch is fully closed; Check and refill hydraulic fluid; Bleed air from the system (consult technician if unsure) |
| Ram not retracting | Oil return switch not fully open; Obstruction | Ensure oil return switch is fully open; Check for any physical obstructions preventing retraction |
| Jaws slipping | Improper jaw engagement; Worn jaws; Workpiece surface too smooth | Re-position jaws for better grip; Replace worn jaws; Use a suitable gripping aid if necessary |
| Витік масла | Damaged seals; Loose connections | Inspect seals and connections; Tighten loose connections; Replace damaged seals (professional service recommended) |
Гарантія та підтримка
For warranty information, product support, or to purchase replacement parts, please contact AMZCNC customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Виробник: AMZCNC
Бренд: AMZCNC
ASIN: B0B2LGXW8R
Щоб отримати додаткові ресурси, відвідайте офіційний AMZCNC Store on Amazon.