HelloBaby AC

HelloBaby Baby Monitor Charger Instruction Manual

For Models HB6550, HB6560, HB50-5V, and other 2022+ HelloBaby Monitors

1. Більшеview

This official HelloBaby replacement charger is designed to provide reliable power to your compatible HelloBaby baby monitor and camera units. It serves as an ideal accessory for replacing a lost or damaged power cord adapter, ensuring continuous monitoring of your little one.

Ключові характеристики:

  • Широка сумісність: Specifically designed for HelloBaby baby monitors and cameras from 2022 and later versions, including HB6550, HB6550-2, HB6560, HB40, HB6339, HB6336, and HB6250.
  • Характеристики живлення: Input: 100-240V, 50/60 Hz; Output: 5.0V, 1A.
  • Оптимальна довжина: Features a 6.6ft (approximately 2 meters) cable, matching the original power cord length for flexible placement.
  • Сертифікат безпеки: Equipped with charging safety certification to ensure safe operation.
HelloBaby baby monitor charger with a warning tag about strangulation hazard.

Figure 1: HelloBaby replacement charger with its attached warning tag. Always keep cords out of reach of children.

2. Інструкції з налаштування

Follow these steps to properly set up your HelloBaby replacement charger:

  1. Перевірте сумісність: Ensure your HelloBaby monitor model is listed as compatible (e.g., HB6550, HB6560, HB50-5V, HB40, HB6339, HB6336, HB6250). If unsure, refer to your monitor's manual or contact HelloBaby support.
  2. Connect to Monitor/Camera: Insert the small connector end of the charger cable into the designated power port on your HelloBaby baby monitor or camera unit.
  3. Підключіть до розетки: Plug the AC adapter end of the charger into a standard 100-240V wall outlet.
  4. Підтвердження заряджання: The monitor or camera should indicate that it is receiving power or charging (e.g., a charging icon on the screen or an LED indicator).
Close-up of the power adapter showing input and output specifications: 100-240V, 50-60Hz, 0.2A input, and 5.0V, 1.0A output.

Figure 2: Power adapter details, confirming 5V 1A output for safe charging.

Video 1: This video demonstrates the HelloBaby monitor's features, including its setup and use, which involves connecting the power adapter for charging and continuous operation.

3. Операція

Once connected, the charger will automatically begin supplying power to your HelloBaby monitor or camera. For optimal battery life, it is recommended to keep the monitor plugged in when not in active use or when the battery level is low. The charger is designed for continuous use.

4. Догляд і технічне обслуговування

To ensure the longevity and safe operation of your charger, please observe the following:

  • Обережно поводьтеся: Уникайте надмірного згинання або скручування кабелю, особливо поблизу роз'ємів, щоб запобігти пошкодженню внутрішніх проводів.
  • Зберігати сухим: Do not expose the charger to water or excessive humidity.
  • Обережно очищайте: If cleaning is necessary, unplug the charger from the wall and wipe it with a dry, soft cloth. Do not use liquid cleaners.
  • Зберігання: Коли зарядний пристрій не використовується, зберігайте його в прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.
  • Попередження про безпеку: The charger cable includes a warning tag regarding strangulation hazards. Always keep the cord out of reach of children (more than 3 feet / 0.9 meters away). Do not remove this tag.

5. Вирішення проблем

If your monitor or camera is not charging, perform the following diagnostic steps:

  • Перевірте розетку: Переконайтеся, що розетка справна, підключивши до неї інший пристрій.
  • Перевірте підключення: Verify that both ends of the charger are securely plugged into the monitor/camera and the wall outlet.
  • Swap Cords (if applicable): If you have two original power cords (e.g., one for the monitor, one for the camera), try swapping them between devices. If a device works with the swapped cord, then the original cord for that device may be faulty, and this replacement charger is needed.
  • Звернутися в службу підтримки: If the issue persists after these steps, contact HelloBaby customer support for further assistance or warranty claims.

6. Технічні характеристики продукту

ОсобливістьДеталь
БрендПривіт, крихітко
Номер моделіAC
Тип роз'ємуAC
Сумісні пристроїHelloBaby Baby Monitors (HB6550, HB6550-2, HB6560, HB50, HB6339, HB6250, HB40, HB6336)
Вхідний об'ємtage100-240 В (змінний струм)
Вихідний випtage5.0 В
Ampераж1 Amps
Wattage5 Вт
Довжина кабелю6.6 футів (приблизно 2 метра)
ОсобливістьЗахист від короткого замикання
КолірБілий
Вага товару0.317 унції

7. Інформація про гарантію

This HelloBaby replacement charger comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.

8. Підтримка клієнтів

For any questions, concerns, or technical assistance regarding your HelloBaby baby monitor charger, please contact HelloBaby customer support. You can typically find contact information on the HelloBaby official webсайті або через продавця, у якого ви придбали товар.

© 2026 HelloBaby. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.