TAMIYA Sand Scorcher 2010 (TAM58452A) 1/10 Scale 2WD Off-Road Racer Instruction Manual

1. Вступ

This manual provides detailed instructions for the assembly, operation, and maintenance of your TAMIYA Sand Scorcher 2010 1/10 Scale 2WD Off-Road Racer (Model TAM58452A). This re-released version faithfully reproduces the unique form of the original buggy, inspired by vehicles from the "Baja 1000" race. The kit features a rear-wheel drive 2WD chassis designed for realistic off-road performance.

Please read this manual thoroughly before beginning assembly or operation to ensure correct usage and to maximize the performance and longevity of your model.

2. Інформація про безпеку

Always observe the following safety precautions to prevent injury or damage to the model.

• This product is a model kit and requires assembly. Adult supervision is recommended for users under 14 years of age.
• Зберігайте дрібні деталі в недоступному для маленьких дітей місці, щоб запобігти небезпеці задухи.
• Use appropriate tools for assembly and follow all instructions carefully.
• Ensure all electronic components are correctly installed and connected before operation. Incorrect wiring can cause damage or fire.
• Operate the model in open, clear areas away from people, pets, and obstacles.
• Do not operate near public roads or in wet conditions.
• Завжди від'єднуйте акумулятор, коли модель не використовується або під час технічного обслуговування.
• Refer to the specific instructions for battery charging and handling provided with your battery and charger.

3. Зміст набору

The TAMIYA Sand Scorcher 2010 kit includes the following main components:

• Polystyrene body parts (white, paintable)
• 2mm thick FRP chassis plate with aluminum reinforcing plate
• Die-cast suspension arms and oil dampers
• Clear plastic mechanism box for electronics and battery
• Повні шарикопідшипники
• 3-piece center-lock wheels with grooved front tires and ribbed rear tires
• Sealed gearbox with built-in motor and gears
• Metal-plated light covers and side mirrors
• Decal sheet and instruction manual

Note: Additional items such as an RC system (transmitter, receiver, servo), electronic speed controller (ESC), battery pack, charger, and paint are sold separately.

4. Інструкція зі складання

Follow the steps below for the assembly of your TAMIYA Sand Scorcher 2010. Refer to the detailed diagrams in the included printed manual for visual guidance.

4.1 Chassis Construction

1. Prepare the FRP Chassis: Attach the aluminum reinforcing plate to the 2mm thick FRP chassis plate. This forms the robust foundation for the vehicle.
2. Install Suspension Components:
   • Передня підвіска: Assemble the front double trailing arm setup using the die-cast suspension arms. Ensure all pivot points are free-moving.
   • Задня підвіска: Assemble the swing axle rear suspension. This design is crucial for dynamic driving on varied terrains.
   • Олія Дampers: Fill and install the oil dampers on both front and rear suspension units. Proper oil viscosity is key for effective dampінж.
3. Mount the Gearbox: Secure the sealed gearbox, which houses the motor and gears, onto the chassis. This unit provides protection against dust and debris.
4. Install Ball Bearings: Replace any plastic bushings with the included full ball bearings to reduce friction and improve efficiency.

малюнок 4.1: Assembled chassis showing the FRP plate, suspension, and gearbox. This image illustrates the internal components and their layout.

4.2 Wheel and Tire Installation

1. Зберіть колеса: Mount the grooved front tires onto the front 3-piece center-lock wheels.
2. Збираємо задні колеса: Mount the ribbed rear tires onto the rear 3-piece center-lock wheels. These tires are designed for optimal traction on sandy surfaces.
3. Прикріпіть колеса: Securely attach the assembled wheels to the front and rear axles.

малюнок 4.2: Close-up of the rear wheel featuring the unique ribbed tire design, optimized for off-road traction.

малюнок 4.3: Close-up of the front wheel with its grooved tire, designed for steering precision.

4.3 Встановлення електроніки

1. Install Servo: Mount the steering servo into its designated position on the chassis. Connect the steering linkages.
2. Install Receiver and ESC: Place the receiver and electronic speed controller (ESC) inside the clear plastic mechanism box. This box protects these components from dust and moisture.
3. Електропроводка: Connect the motor to the ESC, the ESC to the receiver, and the steering servo to the receiver according to their respective manuals. Ensure all connections are secure.
4. Розміщення батареї: Secure the battery pack within the mechanism box.

4.4 Body Assembly and Finishing

1. Body Preparation: Carefully cut out the polystyrene body parts. Sand any rough edges.
2. живопис: Paint the body parts using Tamiya plastic model paints according to your desired scheme. Allow adequate drying time.
3. Деталізація: Attach metal-plated light covers and side mirrors. Apply the included decals for a realistic finish.
4. Остаточний монтаж: Secure the finished body onto the chassis.

малюнок 4.4: Фронт view of the fully assembled TAMIYA Sand Scorcher 2010, showcasing its iconic design and detailed front end.

малюнок 4.5: Задня view of the TAMIYA Sand Scorcher 2010, highlighting the rear suspension and engine details.

малюнок 4.6: The TAMIYA Sand Scorcher 2010 in motion on a sandy surface, demonstrating its off-road capabilities.

малюнок 4.7: сторона view of the TAMIYA Sand Scorcher 2010 during off-road operation, showcasing its suspension travel.

малюнок 4.8: Детальний фронт view of the TAMIYA Sand Scorcher 2010, highlighting the headlights and front bumper.

малюнок 4.9: Close-up of the engine compartment and exhaust details of the TAMIYA Sand Scorcher 2010.

5. Інструкція з експлуатації

Once assembled and all electronic components are installed and calibrated, your TAMIYA Sand Scorcher 2010 is ready for operation.

1. Зарядити акумулятор: Ensure your battery pack is fully charged using a compatible charger.
2. Налаштування передавача: Turn on your RC transmitter first.
3. Vehicle Power-On: Connect the charged battery to the ESC and turn on the vehicle's power switch.
4. Перевірка функції: Before driving, check steering and throttle response. Ensure the steering turns correctly and the throttle responds as expected.
5. Водіння: Operate the model in a safe, open environment. Start with gentle throttle inputs to get accustomed to the vehicle's handling.
6. Вимкнення живлення: Always turn off the vehicle's power switch first, then turn off the transmitter. Disconnect the battery from the ESC.

6. Технічне обслуговування

Regular maintenance will ensure optimal performance and extend the lifespan of your model.

• Прибирання: After each use, especially in dusty or sandy conditions, clean the model thoroughly. Remove dirt and debris from the chassis, suspension, and gearbox. Use a soft brush or compressed air.
• Огляд: Regularly inspect all screws, nuts, and bolts for tightness. Check for any damaged or worn parts, such as suspension arms, gears, or tires.
• Змащення: Apply appropriate grease or oil to moving parts as recommended in the detailed kit manual. Pay attention to the gearbox and universal joints.
• Dampers: Check oil dampers for leaks and ensure smooth operation. Refill or replace damper oil as needed.
• електроніка: Keep electronic components clean and dry. Ensure all wires are securely connected and free from damage.
• Зберігання: Store the model in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect the battery during storage.

7. Вирішення проблем

This section addresses common issues you might encounter with your TAMIYA Sand Scorcher 2010.

8. Технічні характеристики

Key specifications for the TAMIYA Sand Scorcher 2010 (Model TAM58452A):

• Розміри продукту: 22.8 x 14.9 x 6.1 дюймів
• Вага товару: 6.9 фунта
• ASIN: B09S55BBDP
• Рекомендований виробником вік: 14 months - 9 years (Note: This age range seems unusually low for a model kit; adult supervision is strongly advised for younger users.)
• Виробник: Тамія
• Тип шасі: 2WD Off-Road
• Масштаб: 1/10
• Матеріал корпусу: White Polystyrene (paintable)
• Підвіска: Front double trailing arm, Rear swing axle
• Підшипники: Повні шарикопідшипники

9. Гарантія та підтримка

Specific warranty information for the TAMIYA Sand Scorcher 2010 (TAM58452A) is not provided in this document. Please refer to the official TAMIYA webсайт або зверніться до свого продавця, щоб дізнатися детальні умови гарантії.

For technical support, replacement parts, or further assistance, please visit the official TAMIYA webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів.

Офіційна TAMIYA Webсайт: www.tamiya.com