Amazon Basics ASD2401-01E
Посібник користувача бездротової акумуляторної викрутки Amazon Basics
Model: ASD2401-01E
1. Вступ
Thank you for choosing the Amazon Basics Cordless Rechargeable Screwdriver. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.

малюнок 1: закінченоview of the Amazon Basics Cordless Rechargeable Screwdriver with key features highlighted, including torque settings, LED light, USB-C charging port, and 1/4" quick change collet.
2. Вміст упаковки
Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.
- 1 x Amazon Basics 3.6V (4V max.) Cordless Screwdriver
- 1 x Integrated 2000 mAh Lithium-ion Rechargeable Battery (pre-installed)
- 1 x USB-C зарядний кабель
- 1 x 10-piece Bit Set (including various Phillips, Slotted, and Pozidriv bits)

малюнок 2: The complete package contents, showing the cordless screwdriver, USB-C charging cable, and the 10-piece bit set with a bit holder.
3. Інформація про безпеку
Завжди дотримуйтесь основних запобіжних заходів під час використання електроінструментів, щоб зменшити ризик пожежі, ураження електричним струмом та травмування.
Загальні правила безпеки:
- Безпека на робочому місці: Тримайте своє робоче місце чистим і добре освітленим. Захаращені або темні місця призводять до нещасних випадків. Не використовуйте електроінструменти у вибухонебезпечних середовищах, наприклад, у присутності легкозаймистих рідин, газів або пилу.
- Електрична безпека: Уникайте контакту тіла із заземленими поверхнями (наприклад, трубами, радіаторами, плитами, холодильниками). Не піддавайте електроінструменти впливу дощу або вологи.
- Особиста безпека: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
- Використання та догляд за інструментом: Не застосовуйте силу до електроінструменту. Використовуйте правильний електроінструмент для вашого застосування. Не використовуйте електроінструмент, якщо вимикач не вмикає та не вимикає його. Від’єднайте штекер від джерела живлення та/або акумуляторну батарею від електроінструменту, перш ніж виконувати будь-які налаштування, змінювати аксесуари або зберігати електроінструменти.
- Використання акумуляторного інструменту та догляд за ним: Заряджайте лише зарядним пристроєм, зазначеним виробником. Використовуйте електроінструменти лише зі спеціально призначеними акумуляторними блоками.
4. Налаштування
4.1 Заряджання викрутки
The screwdriver comes with an integrated rechargeable Lithium-ion battery. Before first use, fully charge the battery.
- Locate the USB-C charging port on the screwdriver (usually at the base or side).
- Підключіть наданий зарядний кабель USB-C до зарядного порту викрутки.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included, 5V max. 1A recommended) or a USB port on a computer.
- The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
- Charging is easy via USB anywhere.

малюнок 3: The USB-C charging cable and the 10-piece bit set, essential accessories for the screwdriver's operation and maintenance.
4.2 Встановлення/заміна біт
The screwdriver features a 1/4" quick change hexagonal collet for fast and easy bit changes.
- Ensure the screwdriver is turned off and not operating.
- Insert the desired 1/4" hexagonal screwdriver bit firmly into the collet until it clicks into place.
- To remove a bit, pull it straight out from the collet.
5. Інструкція з експлуатації
5.1 Powering On and Direction Control
The screwdriver is operated by pressing the forward or reverse buttons.

малюнок 4: Топ view of the screwdriver highlighting the forward and reverse buttons, and the torque setting indicator.
- Натисніть кнопка вперед (usually indicated by an arrow pointing right or forward) to drive screws.
- Натисніть reverse button (usually indicated by an arrow pointing left or backward) to remove screws.
- Відпустіть кнопку, щоб зупинити викрутку.
5.2 Параметри крутного моменту
The screwdriver offers 3 adjustable torque settings (low, medium, high) to suit different applications and prevent overtightening or stripping screws.
- Press the torque adjustment button (often labeled "MAX" or with a torque icon) to cycle through the settings.
- Select a lower torque for delicate materials or small screws, and a higher torque for tougher materials or larger screws.
- Максимальний крутний момент становить 5 Нм.
5.3 Вбудовані світлодіодні ліхтарі
Two integrated LED lights illuminate the work area, improving visibility in low-light conditions.
- The LED lights typically activate automatically when the screwdriver is in operation.

малюнок 5: The cordless screwdriver being used to install a hinge on a cabinet, demonstrating its compact size and utility in tight spaces.
6. Технічне обслуговування
6.1 Очищення
- Завжди від’єднуйте інструмент від будь-якого джерела зарядки перед чищенням.
- Протріть зовнішню частину інструменту м’якою ганчіркоюamp тканина. Не використовуйте агресивні хімікати або абразивні засоби для чищення.
- Тримайте вентиляційні отвори чистими від пилу та сміття.
6.2 Зберігання
- Store the screwdriver in a dry place, away from direct sunlight and extreme temperatures.
- Ensure the battery is partially charged before long-term storage to maintain battery health.
- Зберігати в недоступному для дітей місці.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Викрутка не вмикається. | Акумулятор розрядився. | Charge the battery fully using the provided USB-C cable. |
| Викрутка зупиняється під час роботи. | Overload protection activated / Battery low. | Reduce pressure on the tool. Allow it to cool down. Recharge the battery. |
| Ковзанки для біт або смужки для головок гвинтів. | Incorrect bit size / Torque setting too high. | Ensure the correct bit size is used for the screw. Adjust to a lower torque setting. |
| Індикатор зарядки не працює. | Несправний кабель або джерело живлення. | Спробуйте інший кабель USB-C або адаптер живлення. Переконайтеся, що з’єднання надійні. |
8. Технічні характеристики
| Номер моделі | ASD2401-01E |
| томtage | 3.6 В (4 В макс.) |
| Тип батареї | Integrated Lithium-ion, 2000 mAh |
| Швидкість без навантаження | До 300 об/хв |
| Максимальний крутний момент | 5 Нм |
| Параметри крутного моменту | 3 (низький, середній, високий) |
| Розмір цанги | 1/4" Hexagonal |
| Порт зарядки | USB-C |
| Розміри (Д x Ш x В) | 3.51 x 3.61 x 17.7 см (приблизно 1.38 x 1.42 x 6.97 дюймів) |
| вага | 299.37 грамів (приблизно 0.66 фунта) |
| Країна походження | Китай |

малюнок 6: The product label on the underside of the screwdriver, displaying model number, voltage, and manufacturing details.
9. Гарантія та підтримка
This Amazon Basics product is covered by a 5-річна гарантія на інструмент. For warranty claims or technical support, please contact Amazon customer service. Information regarding spare parts availability is currently not provided.
For returns, the standard return policy allows for refunds or replacements within 30 days, as per Amazon's policy.
Щоб отримати додаткову допомогу, відвідайте Основи магазину Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.