LEPOTEC 54-LED Motion Sensor Cabinet Light Instruction Manual (Model L54-2-warm)

вступ

Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.

Вміст упаковки

2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
2 x Iron Sheets (for magnetic mounting)
1 x USB-кабель для зарядки
2 х клейких стрічок
1 х посібник користувача

Продукт закінченийview

The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.

LEPOTEC 54-LED Motion Sensor Cabinet Light with dimensions and charging details — **зображення:** закінченоview of the LEPOTEC 54-LED Motion Sensor Cabinet Light, showing its dimensions (12.5"L x 1.6"W x 0.4"H), 2500mAh battery capacity, quick charge capability (fully charged in 3 hours), and charging status indicators (red for charging, green for fully charged). It also highlights that it's rechargeable, eliminating the need for frequent battery exchange.

монтаж

The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:

Магнітне кріплення: The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
Клейовий монтаж: For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
Видалення: When charging or relocating, simply detach the light from the magnetic strip or ironwork.

Installation steps for the LEPOTEC Motion Sensor Cabinet Light — **зображення:** Step-by-step guide illustrating the installation process. It shows attaching the iron piece to the desired surface using adhesive tape, then magnetically securing the light to the iron piece. This method allows for easy removal for charging or repositioning.

Режими роботи

The light features a 3-mode switch (On-Off-G) to adjust its operation:

Режим ON: Світло продовжує горіти.
Режим вимкнення: Світло вимкнено.
G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.

LEPOTEC Motion Sensor Cabinet Light 3-mode switch — **зображення:** Close-up of the light's control panel, highlighting the Type-C charging port, charging indicator, and the 3-mode switch (G, OFF, ON) for motion sensing, no light, and continuously lighting modes.

Motion Sensor Conditions

Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.

Auto-induction condition for LEPOTEC Motion Sensor Cabinet Light — **зображення:** Illustration of the auto-induction condition. In a bright light environment (daytime), the inductor will not be triggered, and the light will remain off. In a low light environment (night), it turns on automatically if motion is sensed within a 10ft/120° range and extinguishes after 20 seconds of no movement.

Зарядка

The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.

Час зарядки: Приблизно 3 години для повної зарядки.
Термін служби батареї: About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
Індикатор зарядки: A red light indicates charging, and a green light indicates a full charge.

Сценарії використання

This versatile light can be used in various indoor locations to provide convenient illumination:

Various usage scenarios for LEPOTEC Motion Sensor Cabinet Light — **зображення:** Examples of where the light can be used, including handheld, in a car trunk, on stairs, and in a children's room. Icons also suggest use in children's rooms, washrooms, kitchens, cupboards, stairs, car trunks, garages, and outdoors.

Усунення несправностей

Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.

Технічні характеристики

Особливість	Деталь
Бренд	ЛЕПОТЕК
Номер моделі	L54-2-warm
Колір	Silver-warm White Light
матеріал	Алюміній
Розміри продукту	12.5 см (Д) x 1.6 см (Ш) x 0.4 см (В)
Джерело живлення	Живлення від батареї (перезаряджається USB)
Тип батареї	Літій-полімерний (2500 мАг)
Тип джерела світла	LED (54 lamp бісер)
Яскравість	300 люменів
Колірна температура	3500 Kelvin (Warm White Light)
Особливість	Датчик руху
Тип установки	Поверхневий монтаж (магнітний/клейовий)
Використання в приміщенні/зовні	закритий
Вага товару	13.3 унції

Підтримка клієнтів

For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC webсайт.

LEPOTEC L54-2-warm

LEPOTEC 54-LED Motion Sensor Cabinet Light

Model: L54-2-warm