PRO VIBE Aeropursuit Handlebar 360mm Instruction Manual

1. Продукт закінчивсяview

The PRO VIBE Aeropursuit Handlebar is an aerodynamic aluminum handlebar designed for road cycling. It features a 6066 aluminum construction, an aerodynamic top section, and internal cable routing for both mechanical and Shimano Di2 systems. This model has a 10-degree flare and a 12-degree sweep, providing an optimized ergonomic and aerodynamic riding position.

Зображення 1.1: Збоку view of the PRO VIBE Aeropursuit Handlebar, showcasinйого аеродинамічні перевагиfile.

2. Інформація про безпеку

Always prioritize safety during installation and use. Improper installation can lead to serious injury or product damage. If you are unsure about any installation steps, consult a professional bicycle mechanic.

• Ensure all bolts are tightened to the manufacturer's specified torque settings. Overtightening or undertightening can cause failure.
• Regularly inspect the handlebar for any signs of damage, cracks, or stress. Replace immediately if damage is found.
• Do not modify the handlebar. Any alterations may compromise its structural integrity and void the warranty.
• Wear appropriate safety gear, including a helmet, when cycling.

3. Вміст упаковки

Переконайтеся, що ваш пакет містить такі елементи:

• PRO VIBE Aeropursuit Handlebar (360mm width)

No additional components are included with the handlebar itself.

4. Налаштування та встановлення

This section outlines the general steps for installing your PRO VIBE Aeropursuit Handlebar. Specific torque values and detailed procedures for brake levers and shifters should be referenced from their respective manufacturer manuals.

4.1 Необхідні інструменти

• Динамометричний ключ
• Hex keys (various sizes, typically 4mm, 5mm)
• Grease (for stem clamp болти)
• Cable cutters (for mechanical cables)
• Di2 wire routing tools (if applicable)

4.2 Handlebar Installation on Stem

1. Remove your old handlebar from the stem.
2. Clean the stem clamp area and apply a thin layer of grease to the stem clamp болти.
3. Position the PRO VIBE Aeropursuit Handlebar in the stem clamp. Ensure the handlebar is centered and at the desired angle. The clamp diameter is 31.8mm.
4. Tighten the stem faceplate bolts gradually and evenly, following a cross-pattern if applicable, to the manufacturer's specified torque (typically 5-8 Nm). Refer to your stem manufacturer's instructions for exact torque values.

Зображення 4.1: спереду view of the PRO VIBE Aeropursuit Handlebar, showing the clamp area and overall shape.

4.3 Brake Lever and Shifter Installation

1. Slide your brake levers and shifters onto the handlebar.
2. Position them ergonomically for comfortable reach and control.
3. Затягніть клamp bolts for the brake levers and shifters to their manufacturer's specified torque. Do not overtighten.

4.4 Внутрішня прокладка кабелю

The PRO VIBE Aeropursuit Handlebar features internal routing for brake and shifter cables/wires. This provides a clean aesthetic and aerodynamic benefit.

• Carefully feed the brake and shifter cables/wires through the designated entry and exit ports on the handlebar.
• For Shimano Di2 systems, ensure the wires are routed correctly to avoid pinching or damage. The handlebar is designed for Di2 integration.
• Once cables are routed, install handlebar tape.

Image 4.2: Close-up of the handlebar bend, illustrating the internal cable routing ports.

5. Інструкція з експлуатації

The PRO VIBE Aeropursuit Handlebar is designed to enhance your cycling experience through its ergonomic and aerodynamic features.

• Верхній розділ: The aerodynamic top section provides a comfortable and efficient hand position for cruising or climbing.
• Hoods Position: The primary riding position, offering access to brake levers and shifters.
• Drops Position: The flared and swept drops (10-degree flare, 12-degree sweep) offer an aggressive, aerodynamic position for sprinting or descending, while maintaining wrist comfort and control.

6. Технічне обслуговування

Proper maintenance ensures the longevity and safe operation of your handlebar.

• Прибирання: Clean the handlebar regularly with a mild soap and water solution. Avoid harsh chemicals that could damage the finish.
• Огляд: Periodically check the handlebar for any signs of fatigue, such as cracks, dents, or deep scratches, especially around the stem clamp and lever clamp області.
• Перевірка болтів: Ensure all stem and lever clamp bolts remain tightened to their specified torque settings. Loose bolts can lead to component slippage or failure.
• Handlebar Tape: Replace worn or damaged handlebar tape to maintain grip and comfort.

7. Вирішення проблем

This section addresses common issues you might encounter with your handlebar.

8. Технічні характеристики

9. Гарантія та підтримка

PRO products are manufactured to high standards. For specific warranty information, please refer to the official PRO website or contact your authorized PRO dealer. Keep your proof of purchase for any warranty claims.

For technical support or further assistance, please visit the official PRO webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів. PRO Official Webсайт