BTF-LIGHTING RT9 & VP LED Strip Controller Kit User Manual

1. Вступ

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RT9 & VP LED Strip Controller Kit. This kit is designed to provide versatile control over RGB and RGBW LED strips, offering features such as multi-zone control, color adjustment, and brightness dimming via a 2.4GHz RF wireless remote.

2. Інформація про безпеку

Переконайтеся, що вхід обtage (12V/24V DC) matches the requirements of both the controller and the LED strips. Incorrect voltagе може завдати шкоди.
Do not exceed the maximum output current or power ratings of the controller. Overloading can lead to overheating and failure.
Always disconnect power before making any wiring connections to prevent electrical shock.
Install the controller in a dry, well-ventilated area. Avoid exposure to moisture, high temperatures, or corrosive environments.
Цей виріб призначений лише для використання в приміщенні.
Зберігати в недоступному для дітей місці.

3. Вміст упаковки

Перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:

Image showing the BTF-LIGHTING RT9 remote, VP controller, user manual, battery, and wall mount bracket.

This image displays the complete contents of the BTF-LIGHTING RT9 & VP LED Strip Controller Kit, including the remote control, VP receiver, instruction manual, two AAA batteries, and a wall-mounted remote holder.

1 x RT9 RF 2.4GHz Wireless Remote Control
1 x VP 4-Channel LED Controller (Receiver)
1 x Remote Wall Mount Bracket
2 батарейки типу AAA (для пульта дистанційного керування)
1 x Посібник користувача (цей документ)

4. Технічні характеристики

Особливість	Специфікація
Номер моделі	JQGD RT9+VP
Вхідний об'ємtage	12/24 В постійного струму
Вхідний струм (макс.)	15.5А
Вихідний випtage	4 x (12/24)V DC
Вихідний струм	4 channels, 4A/channel, Max 6A total
Вихідна потужність (макс.)	4 x (48/96)W
Тип виводу	Постtage
Вхідний сигнал	РЧ 2.4 ГГц
Контрольна відстань	30m (barrier-free space)
Dimming Gray Scale	4096 (2^12) рівнів
Димарний діапазон	0-100%
ШІМ частота	750 Гц (за замовчуванням)
Робоча температура	-30°C ~ +55°C
Рейтинг IP	IP20
Температура корпусу (макс.)	Tc: +85°C
Використання в приміщенні/зовні	закритий

5. Налаштування

5.1. Схема підключення

Follow the diagram below for correct electrical connections. Ensure all connections are secure before applying power.

Detailed wiring diagram for the BTF-LIGHTING LED controller, showing connections from power adapter to controller and then to RGB/RGBW LED strips.

This diagram illustrates the correct wiring connections for the VP 4CH LED Controller. It shows the AC 100-240V power adapter connecting to the controller's input, and the controller's output connecting to the RGB/RGBW LED strip lights. The remote controller is also shown for reference.

Connect your 12V or 24V DC power adapter to the input terminals of the VP controller. Ensure the positive (+) and negative (-) terminals are correctly matched.
Connect the LED strip to the output terminals of the VP controller. For RGBW strips, connect the Red (R), Green (G), Blue (B), and White (W) wires to their respective terminals, and the common positive (+) wire to the V+ terminal. For RGB strips, connect R, G, B, and V+.
Переконайтеся, що всі з'єднання герметичні та ізольовані, щоб запобігти коротким замиканням.

5.2. Контролер надview

Familiarize yourself with the controller's ports and indicators.

Крупним планом view of the BTF-LIGHTING VP LED controller, highlighting input/output terminals and the match key.

Детальний view of the VP LED Controller, indicating the power input terminals (12-24VDC), DC socket input, match key, LED indicator, and the output terminals for Red, Green, Blue, and White LED channels, along with the common positive (+) output.

Споживана потужність: Terminals for 12-24V DC power supply.
DC Socket Input: Alternative power input via a DC barrel jack.
Ключ збігу: Used for pairing the remote control.
Світлодіодний індикатор: Shows the status of the controller (e.g., pairing mode, signal reception).
Вихідні клеми: Labeled V+, R, G, B, W for connecting LED strips.

5.3. Дистанційне сполучення

To pair the RT9 remote control with the VP controller:

Ensure the VP controller is powered on and connected to the LED strip.
Within 3 seconds of powering on the controller, press the 'Match' key on the VP controller once. The LED indicator on the controller will flash.
Immediately press any button on the RT9 remote control.
If pairing is successful, the LED strip will flash a few times, indicating a successful connection.
If pairing fails, repeat the steps. Ensure the remote is within range and its batteries are functional.

6. Інструкція з експлуатації

6.1. Основні функції дистанційного керування

The RT9 remote control allows for comprehensive management of your LED lighting. Insert the two AAA batteries into the remote before use.

Illustration of a user controlling multiple lighting zones in a house using the BTF-LIGHTING RF 2.4GHz wireless remote.

This image demonstrates the wireless transmission capability of the RT9 remote, allowing control of individual lighting zones (Zone 1 to Zone 4 and more) within a 30-meter distance in a barrier-free space. The remote can control multiple LED bulbs or strips in different areas of a home.

Кнопка живлення: Turns the connected LED strips on or off.
Колірне коло: Touch the color wheel to select any desired color.
Регулювання яскравості: Використовуйте кнопки збільшення/зменшення яскравості, щоб налаштувати інтенсивність світла.
Mode Buttons (S1, S2): Cycle through pre-programmed dynamic lighting modes.
Zone Selection (1, 2, 3, 4): Select individual zones to control them independently. Press and hold a zone button to link/unlink a controller to that zone.
RGB/W Buttons: Directly select Red, Green, Blue, or White colors.

6.2. Zone Control

The RT9 remote supports up to 4 independent zones, allowing you to control different sets of LED strips separately or together.

Diagram showing multiple BTF-LIGHTING VP controllers linked wirelessly, extending the control range up to 30 meters between each unit.

This diagram illustrates how multiple VP controllers can be linked together to extend the wireless control range. Each controller can communicate with others within a 30-meter radius, allowing for a larger network of controlled LED strips.

To assign a controller to a zone: Power on the controller, then within 3 seconds, press the 'Match' key on the controller. Immediately press the desired zone number (1-4) on the remote. The LED strip will flash to confirm assignment.
To control a specific zone, press its corresponding number button on the remote.
To control all zones simultaneously, press the 'All' button (if available on your remote model, or cycle through zones).

6.3. Product Feature Videos

This video demonstrates the color-changing capabilities and brightness adjustment of the RGBW 5050SMD LED strip light when controlled by the BTF-LIGHTING system. It showcases the range from 1% to 100% brightness and millions of available colors.

This video provides a visual guide on how to use the RT9 remote control with the VP LED strip controller. It shows the remote's functions for changing colors (RGB and white), adjusting brightness, and selecting different lighting modes for 4-pin and 5-pin LED strips.

7. Технічне обслуговування

Прибирання: Gently wipe the controller and remote with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Заміна батареї: Replace the remote control batteries (2x AAA) when the control range decreases or the remote becomes unresponsive.
Зберігання: If storing the kit for an extended period, remove batteries from the remote and store in a cool, dry place.

8. Вирішення проблем

Випуск	Можлива причина / рішення
Світлодіодна стрічка не світиться.	Check power supply connection to the controller. Ensure the power supply provides the correct voltage (12V/24V) and sufficient amperage for your LED strip length. Verify LED strip is correctly wired to the controller outputs (V+, R, G, B, W). Перевірте наявність нещільних з'єднань або пошкоджених проводів.
Remote does not control the LED strip.	Ensure the remote is paired with the controller. Refer to the "Remote Pairing" section (5.3). Check the remote's battery level and replace if necessary. Ensure there are no significant obstructions between the remote and the controller. Confirm the remote is within the 30m control range.
Incorrect colors or flickering.	Verify wiring connections for RGB/RGBW channels are correct and secure. Ensure the LED strip type (RGB or RGBW) matches the controller's configuration. Check for a stable power supply; voltage fluctuations can cause flickering.
Обмежений діапазон керування.	Ensure the controller is not obstructed by large metal objects or other sources of RF interference. The maximum control distance is 30m in barrier-free space. Walls and other obstacles will reduce this range. Consider adding more controllers to extend the network range if needed.

9. Гарантія та підтримка

BTF-LIGHTING products are manufactured to high standards and undergo rigorous testing. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

If you encounter any issues or require technical assistance, please contact BTF-LIGHTING customer support through the retailer's platform or the official BTF-LIGHTING website. Please have your product model number (JQGD RT9+VP) and purchase information ready when contacting support.

BTF-LIGHTING JQGD RT9+VP