Oumefar B08M67CRC2

Oumefar Brass Spray Misting Nozzle Instruction Manual

Model: B08M67CRC2

1. Вступ

Thank you for choosing the Oumefar Brass Spray Misting Nozzles. This manual provides essential information for the proper setup, operation, and maintenance of your new irrigation nozzles. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

2. Продукт закінчивсяview

The Oumefar Brass Spray Misting Nozzles are designed for efficient and adjustable watering of plants, flowers, and seedlings in gardens, patios, and greenhouses. Made from durable brass, these nozzles offer a fine mist spray for gentle irrigation.

Five Oumefar brass spray misting nozzles

Image: A set of five Oumefar brass spray misting nozzles, showcasinїх дизайн та кількість.

Ключові характеристики:

3. Технічні характеристики

БрендОумефар
МодельB08M67CRC2
матеріалЛатунь
Колірзолото
Spray Flow Rate0.2 - 0.7 Liters Per Minute
Відстань для розпилення1 - 4 метра
Spraying Head SizeApprox. 0.8 cm / 0.3 inch
Connecting Head SizeApprox. 0.5 cm / 0.2 inch
Загальна довжинаApprox. 3.5 cm / 1.4 inch
Вага товару1.02 ounces (per nozzle)
Розміри продукту3.94 x 2.76 x 0.39 inches (packaging/set)
Diagram showing dimensions of the brass spray nozzle

Image: Detailed dimensions of a single brass spray nozzle, indicating length and diameter.

4. Інструкції з налаштування

  1. Підготовка джерела води: Ensure you have a suitable water hose. The nozzles are designed for connecting with a 4/7 inch water tube (ID approximately 5mm). For 8/11 inch water tubes, a connector will be required (not included).
  2. Приєднати насадку: Securely insert the black connecting head of the brass nozzle into the end of your water tube or connector. Ensure a snug fit to prevent leaks.
  3. Позиціонування: Place the nozzles in desired locations within your garden, patio, or greenhouse to achieve optimal spray coverage for your plants.

5. Інструкція з експлуатації

  1. Увімкніть воду: Slowly turn on the water supply to the connected hose.
  2. Налаштуйте форму розпилення: The brass nozzle features an adjustable design. Rotate the brass section of the nozzle to modify the spray pattern from a fine mist to a more concentrated stream, or to turn it off. Experiment with the adjustment to find the ideal mist for your specific watering needs.
  3. Покриття монітора: Observe the spray pattern and coverage to ensure all desired areas are adequately watered. Adjust nozzle positions or spray settings as needed.
Brass misting nozzle spraying water over grass

Image: A single brass misting nozzle actively spraying a fine mist over a patch of green grass, demonstrating its operation.

Close-up of the adjustable brass nozzle tip

Зображення: Крупний план view of the brass nozzle's tip, highlighting the adjustable mechanism for controlling the spray.

6. Технічне обслуговування

7. Вирішення проблем

проблемаМожлива причинаРішення
No water or weak spray
  • Clogged nozzle opening
  • Недостатній тиск води
  • Зігнутий шланг
  • Розберіть і почистіть насадку.
  • Перевірте подачу води та тиск.
  • Розправте шланг.
Water leakage at connection point
  • Послаблене з'єднання
  • Damaged washer/seal
  • Ensure the nozzle is tightly connected to the hose/connector.
  • Перевірте та замініть будь-які пошкоджені шайби або ущільнювачі.
Нерівномірний малюнок розпилення
  • Часткове засмічення
  • Неправильне регулювання
  • Ретельно очистіть сопло.
  • Adjust the brass section of the nozzle until the desired spray is achieved.

8. Гарантія та підтримка

Oumefar products are manufactured to high-quality standards. For any questions, concerns, or support regarding your brass spray misting nozzles, please refer to your purchase documentation or contact Oumefar customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.