1. Продукт закінчивсяview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
малюнок 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Техніка безпеки
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Загальна безпека
- Завжди надягайте відповідні засоби індивідуального захисту (ЗІЗ), такі як захисні окуляри та рукавички.
- Переконайтеся, що насос встановлено на стійкій рівній поверхні, щоб запобігти перекиданню.
- Тримайте дітей та сторонніх осіб подалі від робочої зони.
- Не експлуатуйте насос у вибухонебезпечних середовищах, наприклад, за наявності легкозаймистих рідин, газів або пилу.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Електробезпека
- Переконайтеся, що блок живлення обtage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Вміст упаковки
Verify that all items listed below are present and undamaged upon unpacking:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 х реле тиску
- 1 x Stainless Steel Hose
- 1 х манометр
- 1 x Three-way Brass Fitting
- Посібник користувача (цей документ)
4. Технічні характеристики
| Специфікація | Значення |
|---|---|
| Номер моделі | TWP47506 |
| Тип | Self-priming Automatic Jet Pump |
| Номінальна потужність | 750 Вт (1.0 к. С.) |
| томtage | 220-240В |
| Частота | 50 Гц |
| Макс Хед | 45 метрів |
| Максимальний потік | 60 л/хв |
| Максимальне всмоктування | 9 метрів |
| Діаметр труби | 1 x 1 дюймів |
| Тип двигуна | Copper Wire Induction Motor (Brushless) |
| Матеріал робочого колеса | Нержавіюча сталь |
| Насос Сasing Матеріал | Чавун |
| Довжина кабелю | 0.3 метрів |
| Tank Capacity (Cylindrical) | 24 літра |
| Розміри продукту (Д x Ш x В) | 30 х 19 х 22 см |
| Вага товару | 1.5 кг |
| Колір | Срібло |
5. Налаштування та встановлення
5.1 Розміщення
- Position the pump on a firm, level, and dry surface.
- Забезпечте належну вентиляцію навколо насоса, щоб запобігти перегріву.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Сполучні труби
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Всмоктувальна труба: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Напірна труба: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Заповнення насоса
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casinг чистою водою, доки вона не переллється.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Електричне підключення
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Операція
6.1 Запуск насоса
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Автоматична робота
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Зупинка насоса
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Технічне обслуговування
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Регулярні перевірки
- Огляньте кабель живлення та вилку на наявність ознак пошкодження.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Зверніть увагу на незвичайні шуми під час роботи, які можуть свідчити про проблему.
7.2 Очищення
Протріть зовнішню частину насоса рекламоюamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Підготовка до зими (для холодного клімату)
Якщо насос піддається впливу температур замерзання, його необхідно злити, щоб запобігти пошкодженню:
- Відключіть джерело живлення.
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Зберігайте насос у сухому місці, захищеному від морозу.
8. Вирішення проблем
Перш ніж звертатися до служби підтримки клієнтів, зверніться до наступної таблиці, щоб дізнатися про поширені проблеми та способи їх вирішення.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Насос не запускається | Немає джерела живлення Несправний шнур живлення/штекер Motor overload protection tripped |
Перевірте підключення та розетку Перевірте та замініть, якщо пошкоджено Allow motor to cool, then restart. Check for blockages. |
| Насос працює, але вода не подається | Насос не завантажений Витік повітря у всмоктувальній лінії Висота всмоктування занадто висока Заблокований або застряг ножний клапан Джерело води порожнє |
Re-prime the pump (Section 5.3) Перевірте всі всмоктувальні з'єднання на наявність витоків та затягніть їх Перемістіть насос ближче до джерела води Очистіть або замініть ніжний клапан Ensure adequate water in source |
| Низький потік або тиск | Partial blockage in pipes/impeller Витік повітря у всмоктувальній лінії Зношене робоче колесо Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Зверніться до кваліфікованого сервісного персоналу Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Насос часто вмикається та вимикається | Leak in discharge system Pressure tank pre-charge incorrect Несправний реле тиску |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Гарантія та підтримка
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.