Pipishell PIMF4

Інструкція з експлуатації настінного кріплення для телевізора Pipishell PIMF4 Full Motion

Model: PIMF4 | Brand: Pipishell

1. Вступ

This manual provides detailed instructions for the safe and proper installation and operation of your Pipishell PIMF4 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent potential injury or damage. Keep this manual for future reference.

2. Інформація про безпеку

Always ensure the wall structure can support the combined weight of the mount and your television. If you are unsure about the strength of your wall, consult a qualified professional. Do not exceed the maximum weight capacity of 99 lbs (45 kg). This mount is designed for installation on 12" or 16" wood studs, solid concrete, or brick walls. Do not install on drywall alone. Always use appropriate safety gear during installation.

3. Вміст упаковки

Verify that all components are present and undamaged before installation. The package includes the full motion TV wall mount, various mounting hardware (screws, anchors, washers), and a step-by-step instruction guide. If any parts are missing or damaged, please contact customer service.

4. Технічні характеристики

Номер моделіPIMF4
Сумісність розміру телевізора26-65 дюймів
ВагаДо 99 фунтів (45 кг)
Сумісність VESAВід 100x100 мм до 400x400 мм
Тип монтажуНастінне кріплення Full Motion
Тип рухуArticulating, Swivel, Tilt, Level
Поворотний діапазон+/-45°
Діапазон нахилу+5°/-15°
Регулювання рівня+/-3°
Розширення від стінивід 3.7 до 16.42 дюймів
матеріаллегована сталь
Колірчорний

5. Перевірка сумісності

Before installation, confirm your TV's compatibility with the Pipishell PIMF4 mount.

  • Розмір телевізора: Compatible with most 26-65 inch flat or curved TVs.
  • Вага телевізора: Підтримує телевізори вагою до 45 кг (99 фунтів).
  • Шаблон VESA: Check the four mounting holes on the back of your TV. The distance between these holes (width x height) must be between 100x100mm and 400x400mm.
  • Тип стіни: Designed for installation on 12" or 16" wood studs, solid concrete, or brick walls.
  • TV Ports: Ensure the mount will not block any necessary TV ports or cables.
Diagram showing TV size, VESA, and wood stud compatibility for the Pipishell TV wall mount.

Зображення: Сумісність понадview for Pipishell TV Wall Mount, showing supported TV sizes (26-65in), VESA patterns (Max 400x400mm, Min 100x100mm), and wall types (12"/16" Wood Studs).

Diagram showing how to check TV ports for interference with the wall mount.

Image: Illustration advising users to locate TV ports to ensure the mount does not block cables.

6. Посібник із встановлення

Follow these steps for a secure and successful installation. It is recommended to have two people for TV mounting.

Крок 1: Прикріпіть кронштейни для телевізора

Secure the TV brackets to the back of your television using the appropriate screws and washers provided. Ensure the brackets are centered and firmly attached.

Illustration of attaching TV brackets to the back of a television.

Image: Step 1 of installation, showing how to attach the TV brackets to the television.

Крок 2: Встановіть настінну пластину

Locate the desired mounting position on your wall. Use a stud finder to identify wood studs if applicable. Mark the drill holes and pre-drill according to the instructions. Secure the pre-assembled wall plate to the wall using the provided lag bolts and washers. Ensure it is level and securely fastened.

Close-up of the pre-assembled wall plate being installed on a wall.

Image: The pre-assembled wall plate, ready for mounting, highlighting its design for easy installation.

Illustration of installing the wall plate onto the wall.

Image: Step 2 of installation, demonstrating the process of installing the wall plate.

Крок 3: Повісьте телевізор

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Engage any safety locks or screws to prevent accidental dislodgement.

Illustration of hanging the TV onto the installed wall plate.

Image: Step 3 of installation, showing how to hang the TV onto the wall mount.

Відео монтажу

Video: Official Pipishell demonstration of the full motion TV mount's features and installation process.

7. Експлуатація та регулювання

The Pipishell PIMF4 mount offers various adjustments for optimal viewінж.

  • Розширення та втягування: Gently pull the TV away from the wall to extend it up to 16.42 inches for closer viewing. Push the TV back towards the wall to retract it to 3.7 inches to save space.
  • Поворотний: The mount allows for a +/-45° swivel from left to right. Carefully push or pull the TV to the desired angle.
  • Нахил: Відрегулюйте вертикаль viewing angle with a +5°/-15° tilt range. Loosen the tilt adjustment screws, set the desired angle, and re-tighten the screws.
  • Вирівнювання: After installation, fine-tune the TV's horizontal level by +/-3°. This can be done by adjusting the leveling screws on the TV brackets.
Diagram illustrating the extension, retraction, tilt, and leveling features of the TV mount.

Image: Visual guide to the mount's adjustable features including extension, retraction, tilt (+5°/-15°), and level (±3°).

Video: Official Pipishell video demonstrating the full motion capabilities, including swivel, tilt, and extension of the TV wall mount.

8. Технічне обслуговування

Регулярне технічне обслуговування забезпечує довговічність та безпечну роботу вашого настінного кріплення для телевізора.

  • Періодичний огляд: Періодично перевіряйте всі гвинти та з'єднання, щоб переконатися, що вони надійно затягнуті та закріплені.
  • Прибирання: Протирайте кріплення м’якою сухою тканиною. Уникайте використання абразивних засобів для чищення або розчинників, які можуть пошкодити покриття.
  • Перевірка руху: Occasionally move the TV through its full range of motion to ensure smooth operation of the articulating arms.

9. Вирішення проблем

If you encounter any issues with your TV wall mount, refer to the following common solutions:

  • Телевізор не вирівняний: Use the +/-3° leveling adjustment feature to correct the horizontal alignment. Ensure all mounting screws are tightened evenly.
  • Difficulty Moving TV: Check for any obstructions or overtightened joints. Lubricate moving parts if necessary with a silicone-based spray (avoid oil-based lubricants).
  • Маунт відчувається розхитаним: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into studs or concrete. Do not use the mount if it feels unstable.

10. Гарантія та підтримка клієнтів

Pipishell is committed to providing professional customer service. If you have any questions regarding the installation, product selection, or require assistance, please do not hesitate to contact our U.S.-based product support team. Refer to your product packaging or the official Pipishell webна сайті для отримання контактної інформації.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.