Astralpool NA6888

Керівництво користувача регулятора-контролера-дисплея NA6888

Model: NA6888 | Brand: AstralPool

1. Вступ

The AstralPool NA6888 is a sophisticated regulator, controller, and display unit designed for integration with AstralPool heat pump systems. This device provides essential control and monitoring functionalities for your heat pump, ensuring efficient and reliable operation. Please note that this unit is not compatible with remote control systems.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your NA6888 unit. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Інформація про безпеку

Завжди дотримуйтесь наступних правил безпеки, щоб запобігти травмуванню або пошкодженню пристрою:

  • Електрична безпека: This unit operates on 220V AC. All electrical connections must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
  • Захист навколишнього середовища: The NA6888 unit has an IP65 protection rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, avoid direct high-pressure water jets or submersion.
  • Правильне використання: Use the device only for its intended purpose as a regulator, controller, and display for AstralPool heat pumps. Do not attempt to modify the unit.
  • Обробка: Поводьтеся з пристроєм обережно, щоб уникнути фізичних пошкоджень.

3. Особливості продукту

The NA6888 unit offers a range of features for comprehensive heat pump management:

  • Інтегрований контроль: Combines regulation, control, and display functions in a single compact unit.
  • Входи датчиків: Supports dedicated inputs for a Temperature Sensor (T1) and a Defrost Sensor (T2).
  • Входи сигналізації: Features three external alarm signal inputs (S1, S2, S3) for enhanced system monitoring.
  • Контроль виходу: Provides control outputs for key heat pump components including Water Pump, Fan, Valve, and Compressor.
  • Міцний дизайн: IP65 rated enclosure for protection against dust and water splashes.
Фронт view of the NA6888 controller display

Малюнок 3.1: Спереду view of the NA6888 controller display, showing the digital readout and control buttons.

4. Вміст упаковки

Після відкриття упаковки переконайтеся, що всі наступні компоненти присутні:

  • 1x NA6888 Regulator-Controller-Display Unit
  • 1x Wiring Harness/Cables
  • 2x монтажні затискачі
Bundled wiring harness for the NA6888 controller

Figure 4.1: Included wiring harness.

Two black plastic mounting clips for the NA6888 controller

Figure 4.2: Mounting clips.

5. Налаштування та встановлення

Installation of the NA6888 unit requires careful attention to electrical connections. It is strongly recommended that installation be performed by a qualified and licensed professional.

5.1. Монтаж пристрою

  1. Identify a suitable location for the controller, ensuring it is protected from direct sunlight, extreme temperatures, and excessive vibration.
  2. Cut an appropriate opening in the mounting panel or enclosure, matching the dimensions of the NA6888 unit.
  3. Insert the NA6888 unit into the opening from the front.
  4. Secure the unit in place using the provided mounting clips on the sides, ensuring a snug fit.

5.2. Підключення проводів

Refer to the wiring diagram printed on the back of the NA6888 unit for precise connection points. Ensure all connections are secure and correctly polarized.

Назад view of the NA6888 controller showing the wiring diagram and terminal connections

Figure 5.1: NA6888 Wiring Diagram.

Описи терміналів:

ТерміналописПримітки
T1Датчик температуриConnect the main temperature sensor (NTC=5kΩ/25°C).
T2Датчик розморожуванняConnect the defrost sensor.
S1, S2, S3External Alarm SignalsInputs for external alarm triggers.
1, 2Вхідна потужністьConnect to 220V AC power supply.
6, 7Water Pump OutputControl output for the water pump.
8, 9Вихід вентилятораControl output for the fan.
10, 11Вихід клапанаControl output for the valve.
11, 12Вихід компресораControl output for the compressor. Note shared terminal 11 with Valve.

After all connections are made, double-check the wiring against the diagram to prevent damage to the unit or connected components.

6. Інструкція з експлуатації

Once installed and powered on, the NA6888 display will illuminate, showing current system parameters. The unit features several buttons for navigation and setting adjustments:

  • вгору (^) Кнопка: Used to increase values or navigate up through menu options.
  • вниз (v) Кнопка: Used to decrease values or navigate down through menu options.
  • Кнопка SET: Used to enter a menu, confirm a selection, or save a setting.
  • Кнопка M (Меню): Used to access the main menu or exit a sub-menu.

6.1. Основна операція

  1. Увімкнення: Ensure the unit is correctly wired and power is supplied. The display will show the current temperature or system status.
  2. ViewПараметри: Use the Up/Down buttons to cycle through various displayed parameters (e.g., temperature readings from T1/T2, set points, operational status).
  3. Налаштування параметрів:
    1. Натисніть НАБІР button to enter the setting mode for the currently displayed parameter, or press the M кнопку для доступу до головного меню.
    2. Use the Up/Down buttons to adjust the value.
    3. Прес НАБІР again to confirm and save the new value.
    4. Прес M to exit the menu or setting mode.

For detailed programming and advanced settings, refer to the specific programming guide for your AstralPool heat pump model, as the NA6888 acts as the interface for these settings.

7. Технічне обслуговування

The NA6888 unit is designed for low maintenance. Regular checks can help ensure its longevity and proper function:

  • Прибирання: Periodically wipe the display and casing з м'яким, damp тканина. Не використовуйте абразивні засоби для чищення або розчинники. Переконайтеся, що всередину пристрою не потрапила рідина.
  • Перевірка підключення: Annually, or if issues arise, have a qualified technician check all electrical connections for tightness and signs of corrosion.
  • Умови навколишнього середовища: Ensure the unit remains within its specified operating environment (temperature, humidity) and that its IP65 rating is not compromised by physical damage.

8. Вирішення проблем

If you encounter issues with your NA6888 unit, consider the following common troubleshooting steps. For complex problems, always consult a qualified technician.

проблемаМожлива причинаРішення
Дисплей порожнійNo power supply; Loose connection; Unit failure.Check power source (220V AC). Verify wiring connections. If power is present and connections are secure, the unit may require replacement.
Неправильне показання температуриFaulty sensor (T1 or T2); Loose sensor connection.Check sensor wiring. Test sensor resistance (NTC=5kΩ/25°C). Replace sensor if faulty.
Outputs (Pump, Fan, etc.) not activatingIncorrect settings; Wiring issue; Component failure.Verify controller settings. Check wiring to the respective component. Test the component itself.
External alarm not registeringIncorrect wiring to S1/S2/S3; Faulty external alarm device.Check wiring to alarm inputs. Test the external alarm device.

If troubleshooting steps do not resolve the issue, contact AstralPool customer support or a certified service technician. Information regarding spare parts availability is not provided.

9. Технічні характеристики

ПараметрЗначення
Номер моделіNA6888
БрендАстральний басейн
Джерело живлення220V AC, 2A max
Вхід датчика температуриT1 (NTC=5kΩ/25°C)
Defrost Sensor InputT2
Зовнішні входи тривогиS1, S2, S3
Виходи керуванняWater Pump, Fan, Valve, Compressor
Рейтинг захистуIP65
Категорія встановленняCAT II
ASINB07XGCN44T
Перша доступна дата21 червня 2021 р

10. Гарантія та підтримка

Specific warranty terms for the NA6888 unit are typically provided at the point of purchase or can be obtained directly from AstralPool. Please retain your proof of purchase for warranty claims.

For technical support, service, or inquiries regarding spare parts, please contact AstralPool customer service or your authorized dealer. Contact information can usually be found on the AstralPool official webсайті або у вашій документації щодо придбання.

© 2023 AstralPool. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.