Anlapus 1080P 4-in-1 Outdoor IP66 Surveillance Camera User Manual

1. Продукт закінчивсяview

The Anlapus 1080P 4-in-1 Outdoor IP66 Surveillance Camera is designed to provide high-resolution video monitoring for both indoor and outdoor environments. It features a 3.6mm lens for a wide viewing angle and advanced night vision capabilities.

Figure 1: Anlapus 1080P 4-in-1 Outdoor IP66 Surveillance Camera.

Ключові характеристики:

• HD 1080p Image & Wide Viewкут нахилу: The camera provides 2.0 Megapixel high-resolution video. The 3.6mm lens offers an excellent 90-degree viewкут.
• Compatible with TVI / AHD / CVI / 960H DVR: This is a 4-in-1 camera; you can hold the OSD button to change the video output mode to match your DVR.
• IP66 High Protection Level: The IP66 housing is designed for indoor and outdoor use, supporting various extreme weather conditions. The cable is located within the camera bracket, allowing it to function normally even on rainy days.
• 24m Night Vision: 24 integrated LEDs with IR-Cut film up to 24m at night, providing a clear black and white image.

2. Вміст упаковки

Перевірте наявність усіх предметів у вашій упаковці:

• 1 x Anlapus 1080P 4-in-1 Surveillance Camera
• 1 х Інструкція з експлуатації
• 1 х попереджувальні наклейки
• 1 x сумка для кріпильних гвинтів

Рисунок 2: Комплектація.

3. Налаштування та встановлення

3.1 Компоненти камери

Figure 3: Camera Features and Components.

3.2 Встановлення камери

The camera can be mounted on a ceiling or wall. Use the provided mounting hole template and screws for secure installation.

1. Виберіть відповідне місце для оптимального viewing angle and coverage.
2. Use the mounting template to mark drill holes.
3. Drill pilot holes and secure the camera base using the provided screws.
4. Adjust the camera angle as needed. The camera offers 180-degree tilt and 360-degree rotation.

Figure 4: Camera Mounting Options.

3.3 Підключення камери

The camera uses a wired connection for power and video output.

1. Connect the camera's video output (BNC connector) to an available video input channel on your DVR.
2. Connect the camera's power input to a 12V DC power adapter (not included).
3. Переконайтеся, що всі з’єднання надійні.

Рисунок 5: Схема підключення.

4. Інструкція з експлуатації

4.1 Video Output Mode Conversion

This camera supports multiple video output modes (TVI, AHD, CVI, 960H). The default output mode is CVBS 960H. You may need to change the mode to match your DVR system.

1. Ensure your DVR supports one of the camera's video formats.
2. Connect the camera to your DVR.
3. Locate the OSD joystick on the camera cable.
4. Press and hold the OSD joystick in the desired direction for 5 seconds to switch the output mode:
   • вниз: ХВН
   • Ліворуч: AHD
   • праворуч: TVI
   • Up/Default: CVBS 960H

Figure 6: Camera Output Mode Conversion.

Figure 7: OSD Joystick for Mode Selection.

4.2 Денний та нічний зір

The camera automatically switches between day (color) and night (black and white infrared) vision based on ambient light conditions. The 24 IR LEDs provide clear vision up to 24 meters in low light.

Figure 8: Day and Night Vision Comparison.

Figure 9: Night Vision Performance.

4.3 Широкий Viewкут нахилу

The 3.6mm lens provides a 90-degree wide viewing angle, allowing for broad area coverage.

Figure 10: 90-Degree Wide Viewing Angle.

5. Технічне обслуговування

5.1 Очищення камери

To ensure optimal image quality, regularly clean the camera lens and housing. Use a soft, dry cloth. For stubborn dirt, a slightly damp Можна використовувати тканину, а потім суху. Уникайте абразивних мийних засобів.

5.2 Стійкість до погодних умов

The camera has an IP66 rating, making it resistant to dust and water jets. It is designed to operate in various weather conditions, including rain and extreme temperatures (14°F to 151°F).

Figure 11: IP66 Weather Resistance.

Figure 12: Camera in Rainy Conditions.

5.3 3D Digital Noise Reduction (3DNR)

The camera features 3DNR technology to reduce image noise, especially in low-light conditions, resulting in a clearer picture.

Figure 13: 3DNR Image Quality Comparison.

6. Вирішення проблем

6.1 Video Loss on DVR

If you experience video loss where your camera image should be displayed on your DVR, follow these steps:

1. Check Video Cable Connection: Verify that the video cable (power and video) is correctly connected to the camera.
2. Check DVR Input: Ensure the camera's video output is properly connected to a video input channel on the DVR.
3. Перевірте джерело живлення: Confirm that the camera is receiving adequate power from its power source.
4. Match Video Mode: The camera's video mode might not match your DVR's input. There are two ways to configure this:
   • Press the OSD joystick "DOWN" for 5 seconds. If no image appears, try pressing "LEFT," "RIGHT," or "UP" for 5 seconds each, until the signal matches your DVR.
   • Ensure your DVR's signal is active. Use the OSD joystick to change the camera's mode to match your DVR's video mode.

7. Технічні характеристики

8. Гарантія та підтримка

8.1 Інформація про гарантію

Anlapus products typically come with a standard manufacturer's warranty. Please refer to the specific warranty card included in your package or visit the official Anlapus webсайт для отримання детальних гарантійних умов.

8.2 Підтримка клієнтів

For technical assistance, troubleshooting, or any product-related inquiries, please contact Anlapus customer support. Contact information can usually be found on the product packaging, the official Anlapus webсайт або короткий посібник із початку роботи.

When contacting support, please have your product model number (A1C-106C4-BPS-EU) and purchase details ready.