1. Вступ
Thank you for choosing Tasmor 32.8ft 5050 RGB LED Strip Lights. This product is designed to provide dynamic and customizable lighting for various indoor and outdoor settings. Featuring 16 color options, music synchronization, and remote control functionality, these LED strips offer versatile illumination. Please read this manual thoroughly before installation and use to ensure proper operation and safety.
2. Вміст упаковки
Перевірте наявність усіх компонентів у вашій упаковці:
- 2 x 16.4ft (5m) LED Strip Lights (Total 32.8ft / 10m)
- 1 x Пульт дистанційного керування
- 1 x Set of Adapters (Power Adapter and IR Receiver)
- 1 х посібник користувача
малюнок 2.1: Item Overview. This image displays the complete contents of the Tasmor LED Strip Lights package, including two rolls of 16.4ft LED strips, the remote control, the power adapter, and the IR receiver.
3. Інформація про безпеку
- Перед встановленням або техобслуговуванням переконайтеся, що джерело живлення відключено.
- Використовуйте лише наданий адаптер живлення. Використання несумісного адаптера може пошкодити виріб або створити загрозу безпеці.
- Do not connect the LED strips directly to mains voltage without the adapter.
- Avoid bending the LED strips sharply, as this can damage the circuit board or LEDs.
- While the LED strips are IP65 waterproof, the power adapter and IR receiver are not. Ensure these components are protected from water exposure, especially during outdoor use.
- The LED strips generate low heat and are safe to touch.
- Зберігати в недоступному для дітей місці.
4. Налаштування та встановлення
Для правильного встановлення виконайте такі дії:
- Підготуйте поверхню: Clean and dry the surface where you intend to install the LED strips. Ensure it is smooth and free of dust or grease for optimal adhesion.
- Вимірювання та вирізання (необов'язково): If necessary, measure the desired length for your installation. The LED strips can be cut at designated marks (usually indicated by a copper pad and scissor icon). Cut only along these marks to avoid damaging the circuit.
- Нанесіть смужку: Peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length. For enhanced adhesion, especially on textured or uneven surfaces, consider using additional mounting clips or double-sided tape.
- Підключення компонентів: Connect the LED strips to the IR receiver, and then connect the IR receiver to the power adapter. Ensure all connections are secure. The product supports parallel connection for two strips.
малюнок 4.1: Product Presentation. This image illustrates key features of the LED strip, including its cuttable design, self-adhesive backing, IP65 waterproof rating, and the use of SMD 5050 LED bulbs.
малюнок 4.2: Parallel Connection. This diagram shows how to connect two LED strip rolls to a single IR receiver and power adapter for extended coverage.
- Увімкнення: Plug the power adapter into a standard electrical outlet. The LED strips should illuminate.
5. Інструкція з експлуатації
Control your LED strip lights using the included remote control.
малюнок 5.1: Remote Control. This image details the layout and functions of the RGB controller, including 16 level brightness adjustment, 4 timing settings, 4 music modes, and 3/7 color jump/fade modes.
5.1 Функції дистанційного керування
- Увімкнення/вимкнення живлення: Натисніть потужність кнопку, щоб увімкнути або вимкнути світло.
- Вибір кольору: Виберіть один із 16 статичних кольорів за допомогою спеціальних кнопок кольорів.
- Регулювання яскравості: Використовуйте V+ і V- buttons to increase or decrease the brightness (16 levels available).
- Режими освітлення: Select from 4 dynamic lighting modes (e.g., Flash, Strobe, Fade, Smooth) using the corresponding buttons.
- Музичні режими: Activate one of the 4 music synchronization modes. The lights will change color and intensity based on ambient sound.
- Налаштування часу: Set the lights to automatically turn off after 30, 60, 90, or 120 minutes using the timer buttons.
5.2 Music Mode Operation
The built-in high-sensitivity microphone allows the LED strips to respond to sound, creating a dynamic lighting experience synchronized with music or voice.
- Ensure the IR receiver (which contains the microphone) is not obstructed and is placed in an area where it can pick up sound effectively.
- Select one of the 4 music modes on the remote control.
- The lights will adapt their colors and patterns to the rhythm and melody of the music.
малюнок 5.2: Music Mode. This image illustrates the LED strip lights responding to sound, creating a vibrant and synchronized lighting display in different environments.
5.3 Timing and Energy-Saving
Utilize the timing function to conserve energy and manage your lighting schedule.
- Press the 30min, 60min, 90min, or 120min button on the remote to set an automatic shut-off timer.
- The lights will turn off after the selected duration, promoting energy efficiency.
малюнок 5.3: Timing & Energy-saving. This image demonstrates the energy-efficient nature of the LED lights and the convenience of the timing functions.
6. Технічне обслуговування
- Прибирання: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
- Підключення: Periodically check all connections (strip to receiver, receiver to adapter) to ensure they are secure and free from corrosion.
- Зберігання: If storing the LED strips, ensure they are coiled loosely and kept in a dry, cool place away from direct sunlight.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Світло не вмикається. | Power adapter not plugged in; loose connections; remote control battery depleted. | Check power connection; ensure all cables are securely connected; replace remote control battery. |
| Не працює пульт дистанційного керування. | IR receiver obstructed; remote control battery depleted; remote too far from receiver. | Ensure clear line of sight to IR receiver; replace battery; operate remote within range. |
| Lights not syncing with music effectively. | Microphone on IR receiver obstructed or too far from sound source; sound volume too low. | Ensure IR receiver is unobstructed and closer to the sound source; increase music volume. |
| LED strip falling off surface. | Surface not clean/dry; adhesive weakened; heavy strip weight on vertical surface. | Clean and dry surface thoroughly before reapplication; use additional mounting clips or stronger double-sided tape. |
| Some LEDs not lighting up. | Damage to the strip (e.g., sharp bend, improper cut). | Inspect the strip for visible damage. If a section is damaged, it may need to be replaced. Ensure cuts are made only at designated marks. |
8. Технічні характеристики
- Бренд: Тасмор
- Номер моделі: 748323798395
- Тип світла: Світлодіодні стрічки
- Тип світлодіода: SMD 5050 RGB
- Загальна довжина: 32.8ft (10m) - 2 x 16.4ft rolls
- колір: RGB (Red, Green, Blue) - Multicolor
- Особливості: Dimmable, Music Sync, Timing Function
- Джерело живлення: Провідний електричний
- Рейтинг водонепроникності: IP65 (for LED strips only; adapter and receiver are not waterproof)
- Використання в приміщенні/зовні: Primarily designed for indoor use, but LED strips can be used outdoors with proper protection for non-waterproof components.
- Розміри упаковки: 17.5 х 16.99 х 7.11 см
- Вага упаковки: 621 г
9. Гарантія та підтримка
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Tasmor webсайт. Зберігайте чек про покупку як підтвердження покупки.