Cisco CP-HS-WL-561-S-US

Cisco 561 Wireless Mono Headset User Manual

Model: CP-HS-WL-561-S-US

1. Вступ і даліview

The Cisco 561 Wireless Mono Headset is designed for professional use, offering clear audio and wireless freedom. This headset features DECT 6.0 technology for an extended operating range and is optimized for use with Cisco IP Phones, Cisco Jabber, and Webex devices. Its lightweight, over-the-head design ensures comfort during prolonged use, while the uni-directional microphone provides excellent voice clarity.

Cisco 561 Wireless Mono Headset

Image 1.1: The Cisco 561 Wireless Mono Headset, showcasing its sleek design and single earpiece.

2. Інструкції з налаштування

Follow these steps to set up your Cisco 561 Wireless Mono Headset and its standard base station.

  1. Розпакуйте компоненти: Carefully remove the headset, base station, power adapter, and any included cables from the packaging.
  2. Підключіть живлення: Plug the power adapter into the base station and then into a power outlet. The base station's indicator lights should illuminate.
  3. Підключення до пристрою:
    • For Cisco IP Phones: Connect the base station to your Cisco IP Phone using the appropriate USB-A or RJ-9/AUX cable. Refer to your phone's manual for specific port locations.
    • For Computers/Webex Devices: Connect the base station to your computer's USB-A port.
  4. Зарядка гарнітури: Place the headset onto the base station's charging cradle. Ensure it is seated correctly. The charging indicator on the base or headset will show charging status. Allow the headset to fully charge before first use (approximately 2-3 hours for a full charge).
  5. Pair Headset (if not pre-paired): Most headsets are pre-paired. If pairing is required, consult the base station's specific pairing button and the headset's power button for instructions. Typically, you press and hold the pairing button on the base until an indicator light flashes, then power on the headset near the base.
Cisco 561 Headset with Base Station

Image 2.1: The Cisco 561 Headset placed on its standard base station, ready for charging and connection.

Video 2.1: An official video demonstrating the features and setup of the Cisco Headset 500 Series, which includes the 561 model.

3. Інструкція з експлуатації

Understand how to use your Cisco 561 Headset for calls and audio.

  1. Носіння гарнітури: Adjust the headband for a comfortable fit over your head. Position the microphone boom approximately two finger-widths from the corner of your mouth for optimal voice pickup. The headset is monaural, meaning it covers one ear.
  2. Увімкнення/вимкнення живлення: Press and hold the power button on the headset for a few seconds to turn it on or off. An audible prompt or indicator light will confirm the status.
  3. Відповідь / Завершення дзвінка: Press the Call Control button on the headset or base station to answer an incoming call or end an active call.
  4. Регулювання гучності: Use the volume up (+) and volume down (-) buttons on the headset or the volume dial on the base station to adjust listening volume.
  5. Вимкнення звуку мікрофона: Press the Mute button on the headset or base station to mute or unmute your microphone during a call. An indicator light on the microphone boom or base may show mute status.
  6. Out-of-Range Warning: If you move beyond the 300 ft operating range, you may hear an audible warning. Move closer to the base station to restore connection.
  7. Термін служби батареї: The headset provides up to 9 hours of talk time on a full charge. Place it on the base station when not in use to keep it charged.
Person wearing Cisco 561 Headset

Image 3.1: A user wearing the Cisco 561 Headset, demonstrating its comfortable fit for communication.

4. Технічне обслуговування

Правильне обслуговування забезпечує довговічність та оптимальну роботу вашої гарнітури.

  • Прибирання: Use a soft, dry, anti-static cloth to clean the headset and base station. Do not use liquid cleaners or aerosols directly on the device.
  • Зберігання: When not in use, store the headset on its base station to keep it charged and protected. Avoid storing in extreme temperatures or direct sunlight.
  • Догляд за акумулятором: Для найкращого терміну служби акумулятора уникайте частого повного розряджання гарнітури. Регулярно заряджайте її, навіть якщо вона не повністю розряджена.
  • Амбушюри: Periodically check ear cushions for wear and tear. Replacement cushions may be available from Cisco support.

5. Вирішення проблем

If you encounter issues with your Cisco 561 Headset, refer to the following common problems and solutions.

проблемаМожливе рішення
Немає звуку з гарнітури
  • Переконайтеся, що гарнітура увімкнена та заряджена.
  • Verify the base station is properly connected to your device.
  • Check volume levels on both the headset and the connected device.
  • Confirm the headset is paired with the base station.
Мікрофон не працює
  • Переконайтеся, що мікрофон не вимкнено.
  • Check microphone position; it should be close to your mouth.
  • Verify the headset is selected as the input device in your computer's or phone's audio settings.
Гарнітура не сполучається
  • Ensure both headset and base station are powered on.
  • Initiate the pairing process as described in Section 2.
  • Move the headset closer to the base station.
  • Restart both the headset and the base station.
Обмежений радіус дії бездротового зв'язку
  • Ensure there are no major obstructions (e.g., thick walls, large metal objects) between the headset and base station.
  • Avoid placing the base station near other wireless devices that may cause interference.
Гарнітура не заряджається
  • Ensure the headset is correctly seated in the charging cradle.
  • Verify the base station's power adapter is securely connected and receiving power.
  • Check for any debris in the charging contacts on both the headset and base.

6. Технічні характеристики

Key technical specifications for the Cisco 561 Wireless Mono Headset.

  • Номер моделі: CP-HS-WL-561-S-US
  • Технологія підключення: Бездротовий
  • Бездротова технологія: DECT 6.0
  • Бездротова робоча відстань: До 300 футів (91 метра)
  • Режим звуку: Мононуклеоз
  • Maximum Frequency Response: 48 кГц
  • Розташування вуха: On Ear (Supra-aural)
  • Форм-фактор: Over-The-Head, Monaural
  • Тип мікрофона: Uni-Directional, Electret, Condenser
  • Тип управління: Call Control, Touch (on-ear controls)
  • Контроль шуму: Звукоізоляція
  • Середній термін служби батареї: Час розмови до 9 годин
  • Сумісні пристрої: Cisco IP Phones with USB-A and/or RJ-9/AUX ports (e.g., 6851/6871/6900/7800/8800 models), Cisco Jabber/Webex devices/computers with USB-A ports
  • Вага товару: 16 унції (приблизно 453 грамів)
  • матеріал: Шкіра (амбушури)

7. Гарантія та підтримка

Your Cisco 561 Wireless Mono Headset comes with a limited warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Cisco webсайт.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Cisco customer support through their official channels. You can typically find support contact information on the Cisco webсайті або в упаковці вашого продукту.

Важливо: Keep your proof of purchase and product serial number handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.