A. O. Smith AO-US-200

A. O. Smith AO-US-200 2-Stage Система фільтрації води під раковиною

Інструкція з експлуатації

вступ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your A. O. Smith AO-US-200 2-Stage Under Sink Water Filter System. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. This system is designed to provide clean, filtered drinking water directly from a dedicated faucet.

Важлива інформація з безпеки

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of fire, electric shock, or injury to persons. Keep this manual for future reference.

  • Перед встановленням перекрийте основне водопостачання.
  • Do not install the system where it will be exposed to freezing temperatures.
  • Переконайтеся, що всі з'єднання надійно закріплені, щоб запобігти протіканню.
  • Use only genuine A. O. Smith replacement filters.

Що в коробці

Перед початком встановлення перевірте наявність усіх компонентів:

  • AO-US-200 Filter Unit
  • Кран
  • Filter Cartridge Set (2 cartridges)
  • Розвідний ключ
  • НКТ
  • 1/4" Brass Tee
  • Mounting Screws with Anchors
  • Faucet Installation Hardware (spacers, nuts, washers)
Diagram showing all components included in the AO Smith AO-US-200 water filter system box: filter unit, faucet, two filter cartridges, and a wrench.
Figure 1: Included Components of the AO-US-200 System

Технічні характеристики

Особливість Деталь
Номер моделі АО-УС-200
Фільтрація Stages 2-Stage Claryum Filtration
Термін служби фільтра 6 months / 500 Gallons
Зменшення забруднення Reduces up to 99% of 78 contaminants including Lead, PFAS, Chlorine, Mercury, Asbestos, Pharmaceuticals, Chloramine
Сертифікати NSF/ANSI Standards 42, 53, and 401 (WQA Tested & Certified)
Швидкість потоку 0.5 галона за хвилину
матеріал Карбоновий блок
Розміри (прибл.) Висота: 9 см (22.9 дюйма), ширина: 8.25 см (21 дюйма), глибина: 4.25 см (10.2 дюйма)
Diagram showing the dimensions of the AO Smith 2-stage water filter system, including height, width, and depth measurements.
Figure 2: System Dimensions

Налаштування та встановлення

1. Контрольний список перед інсталяцією

  • Необхідні інструменти: Adjustable wrench, measuring tape, pencil, Phillips head screwdriver, hammer, variable speed drill with 7/32" bit, level.
  • Розташування: Select a space under your sink that is at least 12 inches from the bottom of your cabinet and allows for easy access to a cold water supply line.
  • Faucet Placement: The dedicated faucet may be mounted on the sink using an existing hole (e.g., for a sprayer nozzle or soap dispenser) or by drilling a new hole no more than 1/2 inch in diameter. Ensure the faucet's spout extends slightly past the edge of the sink. Примітка: Ми рекомендуємо скористатися послугами затвердженого або сертифікованого фахівця, якщо потрібне свердління.

2. Connecting to Cold Water Supply

  1. Вимкніть подачу холодної води до раковини.
  2. Disconnect the cold water supply line from the shut-off valve.
  3. Attach the threaded end of the 1/4" brass tee to the cold water shut-off valve.
  4. Connect the cold water supply line to the top of the brass tee.
  5. Tighten all connections using an adjustable wrench.

3. Встановлення крана

  1. Insert the faucet stem through the chosen hole in your sink.
  2. From underneath the sink, slide the faucet rubber washer, faucet washer, and faucet spacer onto the faucet stem.
  3. Secure the faucet with the faucet nut, tightening it with a wrench to ensure it is secure to the sink.

4. Mounting the Filter Unit

  1. Temporarily position the filter unit under the sink in your chosen location.
  2. Позначте олівцем отвори для кріплення.
  3. Drill pilot holes at the marked locations. If mounting into drywall, insert the provided drywall anchors.
  4. Mount the unit to the wall using the provided screws.
Diagram illustrating the DIY installation process for an under-sink water filter system, showing connections to the cold water line and faucet.
Figure 3: Do-It-Yourself Installation Overview
An under-counter view of the installed AO Smith water filtration system, showing the filter unit and associated plumbing beneath a kitchen sink.
Figure 4: Under-Counter Installation Example

5. Сполучна трубка

  1. Connect one end of the provided tubing to the open port on the brass tee. Ensure the plastic tube insert and brass nut are correctly installed for a secure, leak-free connection.
  2. Insert the other end of this tubing completely into the 'IN' port of the filter unit.
  3. Connect another piece of tubing to the faucet stem. Ensure the chrome nut and plastic collar are correctly installed.
  4. Insert the other end of this tubing completely into the 'OUT' port of the filter unit.

6. Початкове промивання системи

  1. Slowly turn on the cold water supply.
  2. Open the dedicated filtered water faucet and allow water to run for 10 minutes to flush the system. This removes air and carbon fines.
  3. Перевірте всі з'єднання на наявність витоків. За потреби підтягніть.

Video 1: Official A. O. Smith AO-US-200 Installation Guide. This video provides a visual walkthrough of the installation process for the 2-stage under sink water filter system.

Керування системою

Once installed and flushed, your A. O. Smith AO-US-200 system is ready for use. Simply open the dedicated filtered water faucet to dispense clean, filtered water. The system filters water at a rate of 0.5 gallons per minute, suitable for families of 1 to 4 people.

Технічне обслуговування: Заміна фільтра

For optimal performance, replace your filter cartridges every 6 months or after 500 gallons of use, whichever comes first. The system is designed for easy, tool-free filter replacement.

Технологія фільтрації

Diagram illustrating how the 2-stage Claryum filtration system works, showing water flowing through two filter cartridges.
Figure 5: How the 2-Stage Claryum Filtration Works
Diagram detailing the Claryum filtration technology, showing activated carbon, catalytic carbon, ion-exchange, and absolute sub-micron mechanical filtration layers.
Figure 6: Claryum Filtration Technology Details

Етапи заміни фільтра

  1. Turn off the cold water supply to the system.
  2. Open the filtered water faucet to relieve pressure and drain any remaining water.
  3. Twist the old filter cartridges counter-clockwise to remove them from the unit housing.
  4. Discard the old filters.
  5. Insert new filter cartridges into the unit housing, aligning the connection points.
  6. Push the new filters up and twist clockwise until they are securely locked into place.
  7. Slowly turn on the cold water supply.
  8. Open the filtered water faucet and allow water to run for 10 minutes to flush the new filters.
  9. Перевірте наявність витоків.
Pro tips for easy installation and filter replacement, including advice on not over-tightening sumps, inserting tubing completely, wetting tube ends, and noting that the system does not reduce TDS.
Figure 7: Pro Tips for Installation and Filter Replacement

Усунення несправностей

проблема Можлива причина Рішення
Витоки в місцях з'єднань Loose fittings, missing O-rings, improper tubing insertion. Ensure all nuts are tightened, check for properly seated O-rings, re-insert tubing fully into quick-connect fittings. Using plumber's tape on threaded connections can help.
Низький потік води з крана Clogged filters, kinked tubing, low incoming water pressure. Replace filters if they are past their service life. Check tubing for kinks. Verify adequate household water pressure.
Неприємний смак/запах Filters are exhausted, initial carbon fines not fully flushed. Replace filters. Flush the system for an extended period (e.g., 15-20 minutes) after filter replacement.
Filter change indicator not working Потребує заміни батареї. Replace the battery in the filter unit's indicator.

Інформація про гарантію

A. O. Smith provides a limited warranty for this product. Please refer to the warranty card included with your purchase or visit the official A. O. Smith webсайт для отримання детальних умов та положень. Зберігайте підтвердження покупки для гарантійних претензій.

Підтримка клієнтів

If you have any questions, require assistance with installation, or need to order replacement parts, please contact A. O. Smith Customer Support:

  • Webсайт: www.aosmith.com
  • телефон: Refer to your product packaging or the A. O. Smith webсайт для отримання найактуальніших контактних номерів.

© 2024 A. O. Smith. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.