Genius G4B-5000.2K

Genius G4B-5000.2K 2-Channel Car Ampлібератор

Інструкція з експлуатації

1. Вступ

Thank you for choosing the Genius G4B-5000.2K 2-Channel Car Ampліфікатор. Це amplifier is designed to deliver powerful and clear audio performance for your vehicle's sound system. To ensure optimal performance and longevity of your amplifier, please read this manual thoroughly before installation and operation. This guide provides essential information on safety, installation, operation, and maintenance.

2. Інформація про безпеку

Завжди дотримуйтесь наступних запобіжних заходів, щоб запобігти травмам або пошкодженню amplifier and vehicle:

  • Рекомендовано професійне встановлення: Due to the complexity of car audio systems and electrical wiring, professional installation by a qualified technician is highly recommended.
  • Відключення живлення: Перед початком будь-якого встановлення від’єднайте негативну клему акумулятора автомобіля, щоб запобігти короткому замиканню.
  • Правильна проводка: Use appropriate gauge wiring for power, ground, and speaker connections as specified in the installation section. Incorrect wiring can cause overheating, fire, or damage to components.
  • Вентиляція: Забезпечити amplifier is mounted in a location with adequate ventilation to prevent overheating. Do not cover the ampпоглинач повітря або блокувати його ребра охолодження.
  • Волога і тепло: Уникайте викриття amplifier to moisture, water, or extreme heat.
  • Захист запобіжника: Завжди використовуйте правильний номінал запобіжника для amplifier's power input. Never replace a fuse with one of a higher rating.
  • Рівні гучності: Тривалий вплив високої гучності може спричинити пошкодження слуху. Регулюйте гучність відповідально.

3. Вміст упаковки

Please check the contents of your amplifier package. If any items are missing or damaged, contact your dealer immediately.

  • One Genius G4B-5000.2K 2-Channel Car Ampлібератор
  • Кріпильні елементи (гвинти, шайби)
  • Посібник користувача (цей документ)

4. Продукт закінчивсяview

The Genius G4B-5000.2K is a 2-channel Class A/B amplifier designed for high-performance car audio systems. It features adjustable high-pass and low-pass filters, bass boost, and comprehensive protection circuitry.

4.1 Підключення задньої панелі

Rear panel of Genius G4B-5000.2K ampЖурнал, що показує клеми живлення та динаміків

Image: Rear panel of the Genius G4B-5000.2K ampліфікатор. Це view shows the power input terminals (GND, REM, B+) on the left and the speaker output terminals (CH1/BRIDGE, CH2) on the right.

  • POWER INPUT (GND, REM, B+): These terminals are for connecting the amplifier to the vehicle's electrical system. 'GND' is for ground, 'REM' is for the remote turn-on signal, and 'B+' is for the main positive battery connection.
  • SPEAKER OUTPUT (CH1/BRIDGE, CH2): These terminals are for connecting your speakers. The amplifier supports 2-channel stereo output or can be bridged for a single, more powerful mono output.

4.2 Елементи керування передньої панелі

Front panel of Genius G4B-5000.2K ampекран, що показує кнопки введення та керування

Image: Front panel of the Genius G4B-5000.2K ampліфікатор. Це view displays the input RCA jacks, gain controls, subsonic filter, high-pass filter (HPF), low-pass filter (LPF), G-Bass frequency, G-Bass level, output RCA jacks, and remote port.

  • INPUT (CH1, CH2): RCA jacks for connecting the audio signal from your head unit or pre-ampліфірник.
  • ПІДИМОК: Регулює вхідну чутливість ampпідсилювач відповідно до вихідної потужності вашого головного пристрою.
  • ДОЗВУКОВИЙ: A filter that removes extremely low frequencies below the audible range, protecting subwoofers and improving sound quality.
  • HPF (фільтр високих частот): Allows frequencies above the set point to pass through, typically used for full-range speakers. Adjustable from 30Hz - 300Hz.
  • LPF (фільтр низьких частот): Allows frequencies below the set point to pass through, typically used for subwoofers. Adjustable from 50Hz - 500Hz.
  • G-BASS FREQ (Bass Boost Frequency): Selects the center frequency for the bass boost. Adjustable from 35Hz - 120Hz.
  • G-BASS LEVEL (Bass Boost Level): Adjusts the intensity of the bass boost. Adjustable from 0 - 12dB.
  • OUTPUT (CH1, CH2): RCA jacks for passing the audio signal to another ampліфікатор у мульти-amp налаштування.
  • ДИСТАНЦІЙНЕ: Port for connecting an optional remote bass level control.
  • PROTECT/POWER Indicators: LEDs indicating the amplifier's status. 'POWER' illuminates when the amplifier is on. 'PROTECT' illuminates when the amplifier enters protection mode due to a fault.

5. Налаштування та встановлення

Правильне встановлення має вирішальне значення для продуктивності та безпеки вашого amplifier. If you are unsure about any step, consult a professional installer.

5.1 Місце монтажу

  • Оберіть сухе, добре провітрюване місце подалі від прямих сонячних променів та джерел тепла.
  • Забезпечте достатній потік повітря навколо amplifier's cooling fins.
  • Змонтуйте amplifier securely to a solid surface using the provided mounting hardware.
  • Avoid mounting on carpet or other materials that could obstruct airflow.

5.2 Підключення проводів

Завжди від'єднуйте негативну клему акумулятора автомобіля перед виконанням будь-яких електричних підключень.

  1. Power Wire (B+): Run a heavy-gauge power cable (e.g., 4-gauge or larger, depending on total system power) directly from the positive terminal of the vehicle's battery to the amplifier's 'B+' terminal. Install an in-line fuse holder within 18 inches (45 cm) of the battery.
  2. Заземлювальний провід (GND): Connect a heavy-gauge ground cable (same gauge as power wire) from the amplifier's 'GND' terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
  3. Дріт дистанційного ввімкнення (REM): Connect a smaller gauge wire (e.g., 18-gauge) from the head unit's remote turn-on output to the amplifier's 'REM' terminal. This wire turns the ampвмикання та вимикання запалювача разом з головним пристроєм.
  4. RCA Input Cables: Підключіть кабелі RCA від попереднього роз'єму головного пристрою.amp виходи на amplifier's 'INPUT' RCA jacks.
  5. Провід динаміка: Connect your speakers to the 'SPEAKER OUTPUT' terminals. Ensure correct polarity (+ to + and - to -) for each speaker. For bridged mode, refer to the diagram on the ampрятувальник або зверніться до фахівця.

6. Інструкція з експлуатації

Одного разу amplifier is installed and all connections are secure, you can power on your system and adjust the settings.

  1. Початкове включення: Reconnect the vehicle's negative battery terminal. Turn on your head unit. The 'POWER' indicator on the ampЗапалювач жигання повинен засвітитися.
  2. Регулювання посилення: Почніть з amplifier's GAIN control set to minimum. Play a familiar piece of music at a moderate volume on your head unit (about 75% of maximum). Slowly increase the GAIN control on the amplifier until you hear slight distortion, then back it off slightly. This matches the ampвхідну чутливість охолоджувача до виходу вашого головного пристрою.
  3. Filter Settings (HPF/LPF):
    • For Full-Range Speakers: Set the HPF to a suitable frequency (e.g., 80Hz-120Hz) to remove low bass frequencies that small speakers cannot reproduce effectively.
    • For Subwoofers (Bridged Mode): Set the LPF to a suitable frequency (e.g., 80Hz-100Hz) to allow only low frequencies to pass to the subwoofer. The SUBSONIC filter can be used to cut frequencies below the subwoofer's resonant frequency (e.g., 20Hz-30Hz).
  4. Bass Boost (G-BASS): Adjust the G-BASS FREQ and G-BASS LEVEL controls to enhance bass response to your preference. Use sparingly to avoid distortion and speaker damage.

7. Технічне обслуговування

The Genius G4B-5000.2K ampЛіфтер вимагає мінімального обслуговування.

  • Прибирання: Періодично протирайте ampПротріть зовнішню частину опалювального приладу м’якою сухою тканиною. Не використовуйте агресивні хімікати або абразивні засоби для чищення.
  • Вентиляція: Ensure the cooling fins remain free of dust and debris to maintain proper heat dissipation.
  • Підключення: Періодично перевіряйте всі з'єднання живлення, заземлення та динаміків, щоб переконатися в їх надійності та відсутності корозії.

8. Вирішення проблем

Якщо у вас виникають проблеми з вашим amplifier, refer to the following common issues and solutions:

проблемаМожлива причинаРішення
No Power (POWER LED off)Перегорілий запобіжник, погане з'єднання живлення/заземлення, немає сигналу дистанційного ввімкнення.Check in-line fuse, verify power and ground connections, check remote wire connection to head unit.
PROTECT LED is onКоротке замикання в проводці динаміка, ampперегрів запалювання, низький об'ємtage.Check speaker wires for shorts, ensure adequate ventilation, check vehicle's battery voltage. Disconnect power, let cool, then reconnect.
Немає виходу звукуNo input signal, incorrect gain setting, speaker wires disconnected, ampліфтер в режимі захисту.Verify RCA input connections, adjust gain, check speaker wiring, refer to 'PROTECT LED' solution.
Спотворений звукGain set too high, improper filter settings, poor ground connection, damaged speakers.Reduce gain, adjust HPF/LPF settings, check ground connection, inspect speakers for damage.
Engine Noise (Whine)Poor ground, RCA cables too close to power wires, faulty head unit.Improve ground connection, reroute RCA cables away from power wires, try a ground loop isolator.

If these steps do not resolve the issue, contact Genius customer support or your authorized dealer.

9. Технічні характеристики

The following are the technical specifications for the Genius G4B-5000.2K 2-Channel Car Ampліфтер:

ОсобливістьСпецифікація
МодельG4B-5000.2K
Кількість каналів2
Вихідна потужність (макс.)4000 Вт
Фільтр високих частот (HPF)30Hz - 300Hz (1X - 10X range)
Фільтр низьких частот (ФНЧ)50Hz - 500Hz (1X - 10X range)
Повне гармонійне спотворення (THD)0.5%
Вхідна чутливість6V
Bass Boost Frequency (G-BASS)35 Гц - 120 Гц
Bass Boost Level (G-BASS)0 - 12 дБ
ВихідВихід RCA
Система захистуTemperature, Short Circuit
Розміри предмета (Д x Ш x В)30.71 x 12.4 x 4.33 дюймів
томtage (робочий)Typically 12V DC (6V input sensitivity)

10. Гарантія та підтримка

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Genius Audio webсайт. Зберігайте чек про покупку як підтвердження покупки для будь-яких гарантійних претензій.

If you require technical assistance or have questions not covered in this manual, please contact Genius customer service through their official channels.

© 2023 Genius Audio. Усі права захищено.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.