Керівництво користувача адаптера Coolgear Gigabit Ethernet USB 3.1 Gen 1

1. Вступ

This manual provides instructions for the installation, operation, and maintenance of the Coolgear Gigabit Ethernet USB3.1 Gen 1 Adapter with 4KVrms Isolation and Mounting Kit. This device allows you to add a high-speed Gigabit Ethernet port to your computer via a USB 3.1 Gen 1 connection, offering robust network connectivity with enhanced electrical isolation for industrial and critical applications.

2. Ключові характеристики

• Compliant with USB Specification 3.1 Gen 1 (5 Gbps), backward compatible with USB 2.0 and USB 1.1.
• Adds a single RJ45 Gigabit Ethernet Port (10/100/1000M).
• Features 4KVAC electrical isolation for the Ethernet port, enhancing protection in demanding environments.
• Supports Wall Mounting Kit and Optional DIN RAIL for industrial critical applications.
• Easy installation for Windows (Plug and Go), also supports Linux and Mac OS X.
• Supports all USB Power Saving Modes.
• Complies with IEEE 802.3, 802.3u, 802.3ab, 802.1Q, and IEEE 802.3az-2010 (Energy Efficient Ethernet).
• Supports Jumbo Frames up to 9K Bytes.
• Supports Microsoft AOAC (Always On Always Connected).
• LED indicators for Ethernet status (LINK/ACT) and data transferring speed.
• Built-in IPv4/IPv6 packet Checksum Offload Engine (COE).
• Supports Suspend mode and remote wake-up, crossover detection, and auto-correction.
• Equipped with 1 Upstream USB3.1 Type-B connector with Screw Lock Mechanism.

3. Вміст упаковки

Переконайтеся, що всі предмети є в наявності та у належному стані після відкриття упаковки:

• Coolgear Gigabit Ethernet USB3.1 Gen 1 Adapter
• Монтажний комплект
• Кабель USB 3.1 типу B – типу A
• Посібник користувача (цей документ)

малюнок 3.1: Contents of the Coolgear Gigabit Ethernet USB3.1 Gen 1 Adapter package, showing the adapter, mounting bracket, and USB cable.

4. Налаштування та встановлення

4.1 Фізичне підключення

1. Підключіть кабель USB: Insert the USB Type-B end of the provided USB 3.1 cable into the USB 3.1 Gen 1 port on the adapter. Connect the USB Type-A end to an available USB 3.1 (or 3.0/2.0) port on your computer.
   

   малюнок 4.1: USB 3.1 Gen 1 Type-B port for host connection.
2. Підключіть кабель Ethernet: Connect a standard RJ45 Ethernet cable from your network router, switch, or wall jack to the RJ45 port on the adapter.
   

   малюнок 4.2: RJ45 Gigabit Ethernet port with LINK/ACT and SPEED LEDs.

4.2 Встановлення драйвера

For Windows operating systems, the adapter is designed for "Plug and Go" functionality, meaning drivers typically install automatically upon connection. For Linux and Mac OS X, built-in drivers are often available, or specific drivers may be required depending on your system version. Refer to the Coolgear website for the latest driver information if automatic installation does not occur.

4.3 Mounting Kit Installation (Optional)

The included mounting kit allows for secure installation of the adapter. The adapter slides into the bracket, which can then be affixed to a surface using screws or other appropriate fasteners. This is particularly useful for industrial or fixed installations.

малюнок 4.3: Adapter shown with its detachable mounting bracket.

5. Операція

Once connected and drivers are installed, the adapter will automatically establish a network connection. Observe the LED indicators on the RJ45 port for status:

• LINK/ACT LED:
  • Світиться зеленим: Indicates a successful network link.
  • Миготливий зелений: Показує мережеву активність (передача даних).
• SPEED LED:
  • Суцільний бурштин: Indicates a 100 Mbps connection.
  • Світиться зеленим: Indicates a 1000 Mbps (Gigabit) connection.
  • Вимкнено: Indicates a 10 Mbps connection.
• Світлодіод PWR: (Located near USB port)
  • Світиться зеленим: Вказує на те, що пристрій увімкнено.

малюнок 5.1: Фронт view of the adapter, highlighting the Ethernet port and LED indicators.

6. Технічне обслуговування

The Coolgear Gigabit Ethernet USB3.1 Gen 1 Adapter is designed for durability and requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Прибирання: Використовуйте м’яку суху тканину для очищення зовнішньої частини адаптера. Не використовуйте рідкі засоби для чищення або аерозолі.
• Середовище: Operate the adapter within its specified temperature and humidity ranges. Avoid exposing it to extreme temperatures, direct sunlight, or excessive moisture.
• Підключення: Періодично перевіряйте всі кабельні з'єднання, щоб переконатися в їх надійності.
• Firmware/Drivers: While not frequently required, occasionally check the Coolgear website for any updated drivers or firmware that may improve performance or address issues.

7. Вирішення проблем

If you encounter issues with your Coolgear Gigabit Ethernet USB3.1 Gen 1 Adapter, refer to the following common problems and solutions:

8. Технічні характеристики

9. Гарантія та підтримка

Coolgear products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Coolgear website. For technical support, driver downloads, or further assistance, please contact Coolgear customer service through their official channels.

Coolgear Official Webсайт: www.coolgear.com