Youshiko YC8061-B
Youshiko YC8061-B Jumbo Radio Controlled Wall Clock
Інструкція користувача
1. Вступ
Thank you for choosing the Youshiko YC8061-B Jumbo Radio Controlled Wall Clock. This clock is designed to provide precise timekeeping, automatically synchronizing with the MSF radio signal for the UK and Ireland. It features a large, clear LCD display that shows time, date, day of the week, indoor temperature, and humidity. This manual will guide you through the setup, operation, and maintenance of your new clock.

Малюнок 1.1: Спереду view of the Youshiko YC8061-B Jumbo Radio Controlled Wall Clock, displaying time, date, day, temperature, and humidity.
2. Вміст упаковки
- Youshiko YC8061-B Jumbo Radio Controlled Wall Clock
- Інструкція з експлуатації
Примітка: 4 x AA batteries are required for operation and are not included in the package.
3. Продукт закінчивсяview
Familiarize yourself with the main components and controls of your clock.

Малюнок 3.1: Задня частина view of the clock, highlighting the battery compartment and control buttons.
Кнопки управління:
- MODE / SET: Used to switch between display modes and enter setting mode.
- ВВЕРХ ВНИЗ: Used to adjust values during setting mode.
- WAVE / RCC: Manually initiates or stops radio control signal reception.
- ALARM ON / OFF: Активує або деактивує будильник.
- СНУЖИТИ: Activates the snooze function when the alarm sounds.
4. Встановлення батареї
- Знайдіть кришку батарейного відсіку на задній панелі годинника.
- Remove the cover by sliding it down or lifting it off.
- Insert 4 new AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Замініть кришку батарейного відсіку.
The clock will power on and begin searching for the radio control signal automatically.
5. Initial Setup & Time Synchronization
The Youshiko YC8061-B clock is designed to automatically set its time and date via the MSF radio signal broadcast from Cumbria, UK. This signal is specifically for use within the UK and Ireland.

Figure 5.1: Explanation of radio control systems (MSF for UK/Ireland, DCF-77 for rest of EU).
Автоматична синхронізація:
- After battery installation, the clock will automatically start searching for the MSF signal. A radio wave icon will flash on the display.
- Place the clock near a window, away from electronic devices that may cause interference.
- The initial synchronization process may take several minutes to a few hours, depending on your location and signal strength.
- Once the signal is successfully received, the radio wave icon will appear solid on the display, and the clock will show the correct time and date.
- The clock will automatically adjust for Daylight Saving Time (DST) and perform daily checks to maintain accuracy.
Ручний пошук сигналу:
If the clock does not synchronize automatically or if you wish to force a signal search, press and hold the WAVE / RCC button. The radio wave icon will flash, indicating it is searching for the signal.
Manual Time Setting (if radio signal is unavailable):
In areas where the radio signal cannot be received, you can manually set the time and date:
- Натисніть і утримуйте MODE / SET кнопку, доки цифри часу не почнуть блимати.
- Використовуйте UP or ВНИЗ buttons to adjust the flashing value (e.g., hour, minute).
- Прес MODE / SET again to confirm the setting and move to the next adjustable item (e.g., minute, year, month, day, 12/24-hour format, temperature unit).
- Повторюйте кроки 2 та 3, доки не будуть налаштовані всі параметри.
- Прес MODE / SET востаннє, щоб вийти з режиму налаштування.
6. Інструкція з експлуатації
Режими відображення:
The clock displays time (hours, minutes, seconds), date (day, month, year), day of the week, indoor temperature, and humidity. The time digits are large (8.3 cm) for easy readability.
Функція сигналізації:
- Щоб встановити час будильника, натисніть кнопку MODE / SET button repeatedly until the alarm time is displayed.
- Натисніть і утримуйте MODE / SET until the alarm hour flashes. Use UP or ВНИЗ налаштувати.
- Прес MODE / SET to confirm the hour and move to minutes. Use UP or ВНИЗ налаштувати.
- Прес MODE / SET щоб вийти з налаштування будильника.
- Щоб увімкнути або вимкнути будильник, натисніть кнопку БУДИЛЬНИК ВКЛ/ВИМК кнопка. Після активації на дисплеї з’явиться значок тривоги.
Функція затримки:
Коли пролунає будильник, натисніть кнопку СНОЙЗ кнопку, щоб тимчасово вимкнути будильник. Будильник знову пролунає приблизно через 5 хвилин.
Вибір одиниці вимірювання температури:
To switch between Celsius (°C) and Fahrenheit (°F) for temperature display, press the UP button during normal time display.
7. Варіанти монтажу
The Youshiko YC8061-B clock offers versatile placement options:
Настінне кріплення:
The clock features a keyhole slot on the back for easy wall mounting. Use a suitable screw (not included) in your desired location.

Figure 7.1: The clock displayed on a wall, showcasing its suitability for wall mounting.
Настільна підставка:
An integrated foldable stand on the back allows the clock to be placed on any flat surface, such as a desk, shelf, or bedside table.

Figure 7.2: The clock positioned on a table using its integrated stand.
8. Технічне обслуговування
Прибирання:
Протріть годинник м’якою сухою тканиною. Не використовуйте абразивні засоби для чищення або розчинники, оскільки вони можуть пошкодити дисплей абоasing.
Заміна батареї:
When the display dims or the clock stops functioning correctly, replace all 4 AA batteries simultaneously. Do not mix old and new batteries or different types of batteries.
9. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Clock does not display anything. | Батарейки розряджені або неправильно вставлені. | Замініть батарейки на нові, дотримуючись правильної полярності. |
| Radio wave icon is flashing, or time is incorrect. | Поганий прийом радіосигналу. | Move the clock to a location with better signal reception (e.g., near a window, away from electronics). Manually initiate signal search using the WAVE / RCC button. |
| Сигналізація не звучить. | Сигналізація не активована. | Press the ALARM ON / OFF button to activate the alarm (alarm icon should appear). |
| Показники температури/вологості здаються неточними. | Clock is placed in an area with extreme temperature fluctuations or direct sunlight. | Relocate the clock to a stable indoor environment. Allow time for readings to stabilize. |
10. Технічні характеристики

Figure 10.1: Dimensions of the Youshiko YC8061-B Jumbo Radio Controlled Wall Clock.
| Особливість | Деталь |
|---|---|
| Номер моделі | YC8061-B |
| Розміри (Д x Ш x В) | 24.8 x 20.6 x 2.8 см (9.76 x 8.11 x 1.1 дюйма) |
| вага | 600 грами |
| Джерело живлення | 4 батарейки типу АА (не входять в комплект) |
| Тип дисплея | Цифровий РК-дисплей |
| Сигнал часу | MSF (UK & Ireland version) |
| Особливості | Radio-controlled, Automatic DST adjustment, Indoor Temperature Display, Indoor Humidity Display, Calendar (Day, Month, Year), Alarm with Snooze, Wall Mountable / Table Stand |
| Колір | чорний |
11. Інформація про гарантію
Youshiko products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty terms and duration may vary by region. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact Youshiko customer support.
12. Підтримка
Should you encounter any issues or have questions regarding your Youshiko YC8061-B Jumbo Radio Controlled Wall Clock that are not addressed in this manual, please contact Youshiko customer support. Contact details can typically be found on the product packaging or the official Youshiko webсайт.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.