Flexson FLXS1WM2011

Flexson Wall Mount for SONOS One (Pair, White) Instruction Manual

Model: FLXS1WM2011

вступ

This manual provides detailed instructions for the installation, operation, and maintenance of your Flexson Wall Mount for SONOS One speakers. Please read these instructions carefully before installation to ensure proper setup and safe use.

Two white Flexson wall mounts with Sonos One speakers attached, angled downwards.

Image: Flexson Wall Mounts with Sonos One speakers.

Налаштування та встановлення

Before beginning installation, ensure you have all necessary components and tools. The package includes fixing hardware suitable for brick/masonry or wood/studwork.

Вміст упаковки:

  • Flexson Wall Mounts (Pair, White)
  • Fixing hardware (screws, wall plugs)
  • Інструкція з експлуатації (цей документ)

Рекомендовані інструменти (не включені):

  • Електрична дриль
  • Нівелір
  • Олівець
  • Викрутка

Кроки встановлення:

  1. Виберіть місце: Select a suitable wall location for your SONOS One speaker. Consider optimal sound projection and accessibility. Ensure the wall material can support the weight of the mount and speaker.
  2. Позначте точки буріння: Hold the wall mount bracket against the wall at the desired height and use a spirit level to ensure it is straight. Mark the drilling points through the screw holes with a pencil.
  3. Flexson wall mount bracket showing screw holes for mounting.

    Image: Wall mount bracket with screw holes.

  4. Свердлити отвори: Using an appropriate drill bit for your wall type (brick/masonry or wood/studwork), drill holes at the marked points.
  5. Insert Wall Plugs (if applicable): For brick/masonry walls, insert the provided wall plugs into the drilled holes.
  6. Прикріпіть настінний кронштейн: Align the wall mount bracket with the drilled holes and secure it to the wall using the provided screws. Ensure the bracket is firmly attached and stable.
  7. сторона view of the Flexson wall mount attached to a wall.

    Зображення: Збоку view of the wall mount attached to a wall.

  8. Прикріпіть динамік до кріплення: Carefully slide your SONOS One speaker onto the mount. The mount is designed to seamlessly fit the speaker base, holding it securely.
  9. Sonos One speaker attached to the Flexson wall mount.

    Image: Sonos One speaker mounted.

  10. Управління кабелем: Route the speaker's power cable through the integrated cable management system on the mount for a tidy appearance.
  11. Inverting the Speaker (Optional): The mount allows the SONOS One to be inverted (mounted upside down). This is useful if mounting higher on the wall, as it keeps the gesture controls and microphone easily accessible.
  12. Flexson wall mount with a Sonos One speaker inverted (upside down).

    Image: Sonos One speaker mounted upside down.

Експлуатація та регулювання

The Flexson Wall Mount offers flexibility in positioning your SONOS One speaker for optimal sound direction.

  • Нахил: The mount features a unique tilting mechanism, allowing you to angle the speaker downwards by up to 15 degrees.
  • Поворотний: You can swivel the speaker up to 80 degrees (40 degrees left, 40 degrees right) to direct sound precisely where needed.

Adjust the tilt and swivel by gently moving the speaker to the desired position. The mount is designed to hold the speaker securely once positioned.

Технічне обслуговування

To ensure the longevity and appearance of your Flexson Wall Mount, follow these simple maintenance guidelines:

  • Прибирання: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
  • Періодичні перевірки: Periodically check that all screws are tight and the mount remains securely fastened to the wall. Do not overtighten.
  • Обмеження ваги: Do not exceed the maximum weight capacity of 0.72 pounds. This mount is specifically designed for the SONOS One speaker.

Усунення несправностей

If you encounter any issues with your Flexson Wall Mount, consider the following:

проблемаМожлива причинаРішення
Кріплення на стіні здається нещільним.Screws are not fully tightened or wall plugs are not secure.Ensure all mounting screws are tightened. If using wall plugs, verify they are correctly installed and suitable for your wall material.
Speaker does not stay in desired tilt/swivel position.Adjustment mechanism may need slight tightening or is worn.Check for any visible adjustment screws on the mount and gently tighten if present. If the issue persists, contact support.
Speaker does not fit the mount.Incorrect speaker model or mount model.Verify that you have the Flexson Wall Mount for SONOS One and a compatible SONOS One or Play:1 speaker.

Технічні характеристики

ОсобливістьДеталь
БрендФлекссон
Назва моделіFlexson Wall Mount for SONOS ONE
Номер моделіFLXS1WM2011
КолірБілий
Сумісні пристроїSonos One, Play:1
Тип монтажуНастінне кріплення
Додаткові функціїTilt Head (down 15°), Swivel (80° total, 40° left/right)
Максимальна вага0.72 фунта
Розміри виробу (ДхШхВ)4.53 x 7.01 x 6.54 дюймів
Вага товару11.47 унції
Матеріал корпусулегована сталь
Обладнання в комплектіFixing hardware for Brick/Masonry or Wood/Studwork
UPC652508362342

Інформація про гарантію

This Flexson product comes with a 1-річна гарантія виробника. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Підтримка та контакт

For further assistance, technical support, or warranty inquiries, please visit the official Flexson website or contact their customer service department. Refer to the packaging or the Flexson webсайт для отримання найактуальнішої контактної інформації.

Виробник: Флекссон

Webсайт: www.flexson.com (Вихampпосилання, будь ласка, перевірте офіційне webсайт)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.