Hobart FP100-1B

Hobart FP100-1B Food Processor Instruction Manual

Model: FP100-1B

вступ

Thank you for choosing the Hobart FP100-1B Food Processor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read these instructions thoroughly before initial use and retain them for future reference.

Важлива інформація з безпеки

  • Завжди відключайте прилад від розетки перед складанням, розбиранням або чищенням.
  • Avoid contact with moving parts. Keep hands and utensils away from the cutting blades during operation to prevent injury.
  • Do not operate the food processor with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
  • Ensure all parts are correctly assembled before operating the unit.
  • This appliance is for commercial use. Do not use outdoors.
  • Не занурюйте основу двигуна у воду чи інші рідини.
  • Використовуйте лише насадки, рекомендовані або продані виробником.

Налаштування

Розпакування та перевірка

Carefully remove all components from the packaging. Inspect the food processor and its accessories for any signs of damage during transit. If any damage is found, do not operate the unit and contact your supplier immediately.

Збірка

  1. Розмістіть основу двигуна на стійкій, рівній та сухій поверхні.
  2. Carefully place the processing bowl onto the motor base, aligning the tabs and rotating until it locks securely into place.
  3. Insert the desired blade or disc onto the drive shaft inside the processing bowl. Ensure it is seated firmly.
  4. Place the lid onto the processing bowl, aligning the tabs and rotating until it locks securely. The unit will not operate unless the lid is properly locked.
  5. Insert the food pusher into the feed tube on the lid.

Підключення живлення

Перед підключенням переконайтеся, що гучністьtage indicated on the appliance matches your local power supply. Plug the power cord into a grounded electrical outlet.

Інструкція з експлуатації

Основна операція

  1. Ensure the food processor is properly assembled and plugged in.
  2. Prepare ingredients by cutting them into appropriate sizes to fit the feed tube.
  3. For chopping or mixing, add ingredients directly into the processing bowl. For slicing or shredding, place ingredients into the feed tube.
  4. Select the desired speed setting (if applicable) or press the 'ON' button.
  5. If using the feed tube, gently push ingredients down with the food pusher. Never use your hands or other utensils.
  6. Обробляйте до досягнення бажаної консистенції.
  7. Press the 'OFF' button or turn the speed dial to 'OFF' to stop the appliance.
  8. Unplug the unit before disassembling and removing processed food.

Поради щодо обробки

  • Для найкращих результатів обробляйте шматки продуктів однакового розміру.
  • Do not overload the processing bowl. Process in batches if necessary.
  • For even chopping, use the pulse function.
  • When processing liquids, ensure the bowl is not filled above the maximum liquid level indicator.

Технічне обслуговування

прибирання

Regular cleaning ensures optimal performance and extends the life of your food processor. Always unplug the unit before cleaning.

  1. Disassemble all removable parts: lid, food pusher, processing bowl, and blades/discs.
  2. Інструкції з догляду за виробом: Ручне прання. Wash all removable parts in warm, soapy water. Rinse thoroughly and dry immediately. Exercise extreme caution when handling sharp blades.
  3. Протріть базу двигуна рекламоюamp тканиною. Ніколи не занурюйте основу двигуна у воду та не ставте її під проточну воду.
  4. Переконайтеся, що всі частини повністю висохли перед повторним складанням або зберіганням.

Зберігання

Store the assembled food processor in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure blades are stored safely to prevent accidental injury.

Усунення несправностей

проблемаМожлива причинаРішення
Пристрій не включається.
  • Не підключено.
  • Lid or bowl not properly locked.
  • Power otage.
  • Переконайтеся, що шнур живлення надійно підключений до робочої розетки.
  • Check that the bowl and lid are correctly assembled and locked.
  • Перевірте подачу живлення до розетки.
Food not processing correctly.
  • Перевантажена чаша.
  • Incorrect blade/disc used.
  • Інгредієнти занадто великі.
  • Reduce the amount of food in the bowl and process in smaller batches.
  • Ensure the correct blade or disc is installed for the task.
  • Наріжте інгредієнти на менші, однорідні шматочки.
Мотор зупиняється під час роботи.
  • Перегрів через тривале використання або перевантаження.
  • Turn off and unplug the unit. Allow it to cool down for at least 30 minutes before restarting. Reduce load for future operations.

Якщо проблема не зникає після спроби цих рішень, зверніться до служби підтримки клієнтів.

Технічні характеристики

  • модель: FP100-1B
  • Бренд: Хобарт
  • Розміри продукту: 16.69 x 8.81 x 19.5 дюймів
  • Вага товару: 42 фунта
  • Wattage: 950 Вт
  • матеріал: Алюміній
  • Інструкції по догляду за виробом: Ручне прання

Гарантія та підтримка

Інформація про гарантію

Hobart products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your FP100-1B Food Processor, please refer to the warranty card included with your purchase or visit the official Hobart webсайт. Зберігайте чек про покупку для гарантійних претензій.

Підтримка клієнтів

Should you require assistance with your Hobart FP100-1B Food Processor, have questions about its operation, or need to report a service issue, please contact Hobart customer support. Contact details can typically be found on the official Hobart webсайті або в упаковці вашого продукту.

When contacting support, please have your model number (FP100-1B) and serial number (if applicable) ready.

© 2023 Хобарт. Усі права захищено.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.