Douk Audio Nobsound NS-02E Vacuum Tube Headphone Ampпосібник користувача lifier

1. Вступ

The Douk Audio Nobsound NS-02E is a compact and versatile vacuum tube headphone amplifier designed to enhance your audio experience. It features an anodized aluminum chassis and a replaceable vacuum tube with blue illumination. This amplifier delivers a soft and warm sound while maintaining exceptional clarity, making it suitable for various audio setups.

The NS-02E can function as a dedicated headphone amplifier or as a tube pre-amplifier, allowing integration with existing power amplifiers to improve musicality and dynamic range. Its design supports easy tube replacement, offering flexibility for sound customization.

2. Вміст упаковки

Будь ласка, перевірте упаковку на наявність наступних предметів:

• 1 × Nobsound NS-02E Headphone Ampлібератор
• 1 × Power Supply Adapter
• 1 × 6N3 Vacuum Tube (pre-installed or separate)
• 1 × Audio Cable (3.5mm to 3.5mm)

3. Продукт закінчивсяview

The NS-02E features a robust anodized aluminum chassis, providing durability and a sleek aesthetic. The visible vacuum tube is illuminated with a blue light when powered on, adding to its unique appeal. The front panel includes a volume control knob and 3.5mm input/output jacks, while the rear panel houses the power input.

Зображення: спереду view of the Nobsound NS-02E Headphone Amplifier, highlighting its anodized aluminum chassis and the illuminated vacuum tube.

Image: The Nobsound NS-02E amplifier shown with its compact dimensions (90x90x39mm), illustrating its small footprint.

4. Інструкції з налаштування

Follow these steps to set up your Nobsound NS-02E ampліфтер:

1. Tube Installation (if not pre-installed): Gently insert the 6N3 vacuum tube into the socket on top of the amplifier. Ensure the pins align correctly with the socket holes and push down firmly but carefully until it is seated.
2. Підключення аудіовходу: Use the provided 3.5mm audio cable to connect your audio source (e.g., smartphone, computer, iPod, stereo system) to the «У» jack on the front panel of the NS-02E.
3. Підключити навушники: Підключіть навушники до «Вихід» jack on the front panel of the NS-02E. The amplifier supports headphones with impedance ranging from 18 to 600 ohms.
4. Підключіть живлення: Connect the power supply adapter to the DC 6V input jack on the rear panel of the ampрятувальник. Потім підключіть адаптер живлення до відповідної розетки.
5. Початкове налаштування гучності: Before powering on, turn the volume knob counter-clockwise to its minimum setting to prevent sudden loud sounds.

Image: Connection diagram illustrating how to connect various audio sources (iPod, smartphone, computer) to the 'In' port and headphones or active speakers to the 'Out' port of the NS-02E.

Using as a Pre-Ampліфтер:

To use the NS-02E as a pre-amplifier, connect your audio source to the 'In' jack as described above. Then, connect the 'Out' jack of the NS-02E to the input of your power amplifier or active speaker system. This configuration allows the NS-02E to process the audio signal before it reaches your main ampсистема звільнення.

5. Інструкція з експлуатації

1. Увімкнення: After all connections are made, press the power button (if available, otherwise it powers on when connected to power). The vacuum tube will illuminate with a blue light, indicating the unit is powered on.
2. Регулювання гучності: Slowly turn the volume knob clockwise to increase the sound level to your desired listening volume.
3. Насолоджуйтесь: Begin playing audio from your connected source.
4. Вимкнення живлення: Щоб вимкнути amplifier, disconnect the power supply from the wall outlet or press the power button if present.

6. Технічне обслуговування

Заміна трубки

The default 6N3 vacuum tube can be replaced with various compatible tubes to customize the sound signature. To replace the tube:

1. Вимкнення та відключення: Забезпечити amplifier is powered off and disconnected from the power supply. Allow the tube to cool down completely before handling.
2. Видалити стару трубку: Gently grasp the existing tube and pull it straight up from its socket. Avoid twisting or bending the pins.
3. Вставити нову трубку: Carefully align the pins of the new tube with the holes in the socket. Gently push the tube straight down until it is fully seated. Do not force it.

Compatible Tube Types:

• США: 6A8Q, 2C51, 5670, 5185, 6385, 6185, WE396
• Європа: ECC 42
• Soviet Union: 6H3N, 6H3II
• Німеччина: ECF82
• Чехія: 6CC42

Image: The Nobsound NS-02E amplifier with a separate vacuum tube, demonstrating the user's ability to replace the default tube with other compatible models for sound customization.

Загальний догляд

• Зберігайте amplifier in a clean, dry environment, away from direct sunlight, heat sources, and moisture.
• Clean the chassis with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Уникайте розміщення важких предметів зверху ampліфірник.

7. Вирішення проблем

If you encounter issues with your NS-02E ampрятувальник, зверніться до наступних поширених проблем та рішень:

8. Технічні характеристики

9. Гарантія та підтримка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Douk Audio customer service directly. Contact details can typically be found on the manufacturer's official webсайті або через вашого продавця.