Ford ET4Z-19G490-A

Ford ET4Z-19G490-A Rear View Збірка камери

Інструкція з експлуатації

1. Вступ

This manual provides essential information for the installation, operation, and maintenance of your Genuine Ford ET4Z-19G490-A Rear View Camera Assembly. This component is an Original Equipment Manufacturer (OEM) part, designed and manufactured to Ford standards for specific vehicle models. Please read this manual thoroughly before proceeding with installation or use.

2. Інформація про безпеку

  • Always disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or damage to vehicle systems.
  • Переконайтеся, що всі з'єднання надійно закріплені та належним чином ізольовані, щоб уникнути коротких замикань.
  • Зверніться до посібника з обслуговування вашого автомобіля, щоб дізнатися про конкретні схеми підключення та розташування компонентів.
  • If you are not comfortable performing the installation, seek assistance from a qualified automotive technician.
  • Задній view camera is an aid and does not replace the driver's responsibility to check surroundings and mirrors before backing up.

3. Вміст упаковки

Перед початком встановлення перевірте наявність усіх компонентів:

  • 1x Ford ET4Z-19G490-A Camera Assembly

If any parts are missing or damaged, do not proceed with installation. Contact your supplier for assistance.

Packaging label for Ford ET4Z-19G490-A camera showing model number and manufacturing details.

Figure 3.1: Packaging label indicating the ET4Z-19G490-A camera assembly.

4. Монтаж

Installation of the Ford ET4Z-19G490-A camera assembly typically involves replacing an existing camera unit. Due to variations in vehicle models and trim levels, specific installation steps may differ. It is highly recommended to consult your vehicle's official service manual or reputable online resources for detailed, vehicle-specific instructions.

Загальні кроки встановлення:

  1. Приготування: Park the vehicle on a level surface, engage the parking brake, and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
  2. Доступ: Gain access to the existing camera assembly. This often requires removing interior trim panels, tailgate components, or exterior emblems, depending on your vehicle model.
  3. Disconnect Old Camera: Carefully disconnect the electrical connector and any mounting hardware securing the old camera.
  4. Встановити нову камеру: Position the new Ford ET4Z-19G490-A camera assembly into the mounting location. Ensure proper orientation (lens facing outwards and downwards for rear view). Secure it with the appropriate mounting hardware.
сторона view of the Ford ET4Z-19G490-A camera assembly, showing the main body and connector.

Малюнок 4.1: Сторона view of the camera assembly, highlighting the connector.

Фронт view of the Ford ET4Z-19G490-A camera lens.

Малюнок 4.2: Спереду view об'єктива камери.

Задня view of the Ford ET4Z-19G490-A camera assembly, showing the label with part number and FoMoCo branding.

Малюнок 4.3: Задня частина view of the camera assembly with identification label.

  1. Підключіть проводку: Connect the vehicle's wiring harness to the camera's RCA connector. Ensure the connection is firm.
  2. Тест функціональності: Before reassembling all trim, reconnect the vehicle's battery. Turn the ignition to the 'ON' position (without starting the engine) and shift the transmission into 'REVERSE'. Verify that the camera image appears correctly on your vehicle's display monitor.
  3. Повторне складання: Once functionality is confirmed, reassemble all removed trim panels and components.

5. Інструкція з експлуатації

The Ford ET4Z-19G490-A Rear View Camera Assembly operates automatically in conjunction with your vehicle's transmission system.

  • When the vehicle's transmission is shifted into 'REVERSE', the camera will activate.
  • The live video feed from the camera will be displayed on your vehicle's compatible monitor.
  • Depending on your vehicle's configuration, dynamic or static guidance lines may appear on the display to assist with parking and maneuvering.
  • The camera will deactivate when the transmission is shifted out of 'REVERSE'.

6. Технічне обслуговування

To ensure optimal performance and longevity of your rear view camera, follow these simple maintenance guidelines:

  • Очищення лінз: Періодично очищуйте об'єктив камери м'якою губкоюamp cloth to remove dirt, dust, and debris. Avoid abrasive cleaners or materials that could scratch the lens.
  • Перевірка підключення: If accessible, occasionally check the electrical connections to ensure they remain secure and free from corrosion.
  • Екологічні фактори: Extreme temperatures, heavy rain, or snow can temporarily affect camera performance. Ensure the lens is clear of ice or snow before use.

7. Вирішення проблем

If you experience issues with your Ford ET4Z-19G490-A Rear View Camera, refer to the following troubleshooting guide:

проблемаМожлива причинаРішення
No image on display when in reverse.Нещільне електричне з'єднання.
Перегорів запобіжник.
Faulty camera unit.
Check all electrical connections to the camera and display.
Inspect vehicle's fuse box for a blown fuse related to the camera or display.
If connections and fuses are good, the camera may require replacement.
Зображення розмите або спотворене.Брудний об'єктив камери.
Волога всередині лінзи.
Damaged camera unit.
Протріть об'єктив камери м'якою губкоюamp тканина.
Allow time for any condensation to dissipate. If persistent, the seal may be compromised.
If cleaning does not resolve the issue, the camera may be damaged.
Image is upside down or incorrect orientation.Incorrect camera model for vehicle.
Неправильна установка.
Verify that the ET4Z-19G490-A is the correct part number for your specific vehicle model and year.
Ensure the camera is installed with the correct orientation as per vehicle service manual.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified automotive technician or contact Ford customer support.

8. Технічні характеристики

ОсобливістьДеталь
Номер моделіET4Z-19G490-A
ВиробникФорд
Назва типу елементаCAMERA ASY
Сумісні пристроїМонітор
Тип установкиПоверхневий монтаж
Технологія оптичного датчикаCMOS
Тип об'єктиваШирокий кут, фіксований
Тип роз'ємуRCA
Формат захоплення відеоMP4
Роздільна здатність захоплення відео720p
Вага товару16 унцій (приблизно 0.45 кг)

9. Гарантія та підтримка

This Genuine Ford Part is covered by a limited warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to the warranty documentation provided with your vehicle or contact an authorized Ford dealership or Ford customer service.

For technical support, installation assistance, or warranty inquiries, please contact your local authorized Ford dealership or visit the official Ford webсайт із ресурсами підтримки клієнтів.

© 2024 Ford Motor Company. Всі права захищені.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.