Важливі інструкції з безпеки
Будь ласка, прочитайте та зрозумійте всі інструкції перед початком встановлення. Недотримання цих інструкцій може призвести до ураження електричним струмом, пожежі або інших травм, які можуть бути смертельними або спричинити пошкодження майна.
- УВАГА: Ризик ураження електричним струмом. Від’єднайте живлення від запобіжників або автоматичного вимикача перед встановленням або обслуговуванням.
- Усі електричні з’єднання мають відповідати місцевим нормам, постановам або Національному електричному кодексу (NEC). Зверніться до кваліфікованого електрика, якщо ви не знайомі з правильними електропроводками.
- This fixture is designed for indoor, dry location use only. Do not install in wet or damp області.
- Переконайтеся, що поверхня для кріплення може витримати вагу приладу.
- Пропозиція 65 Попередження: Цей продукт може містити хімічні речовини, відомі штату Каліфорнія, що спричиняють рак та вроджені вади або інший репродуктивний шкоду.
Продукт закінченийview
The EGLO Tarbes 3-Light Pendant is an adjustable lighting fixture designed for indoor use, suitable for kitchen islands, hallways, and dining rooms. It features three individual pendant lights with geometric metal shades, suspended from a linear canopy. The fixture is finished in matte black, offering a contemporary aesthetic.

Image: EGLO Tarbes 3-Light Pendant Fixture. This image shows the complete pendant light fixture with three individual lights, each featuring a geometric metal shade, suspended from a linear bar in matte black finish.
Вміст упаковки
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Light Fixture Assembly (Canopy, Suspension Rods, 3 Pendant Shades with Sockets)
- Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts)
- Інструкція з експлуатації
Примітка: Лампочки не входять до комплекту та мають бути придбані окремо.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | EGLO |
| Номер моделі | 94189А |
| Колір | Матовий чорний |
| матеріал | Метал (Арматура), Скло (Абажур) |
| Стиль | Contemporary / Transitional |
| Форма світильника | Кулон |
| Використання в приміщенні/зовні | закритий |
| Джерело живлення | Провідний електричний |
| Джерело світла | Incandescent (E26 base recommended) |
| Кількість джерел світла | 3 |
| томtage | 120 вольт |
| Wattage (Max per bulb) | 100 Вт |
| Тип монтажу | Виступаючі |
| Необхідна збірка | так |
| Атестація | Внесено до списку UL |
| Розміри предмета (Д x Ш x В) | 31.06" x 6.3" x 10.5" (Fixture body) |
| Регульована висота | Up to 72 inches (total height) |
| Вага товару | 4.43 фунта |

Image: EGLO Tarbes 3-Light Pendant with dimensions. This diagram illustrates the overall dimensions of the fixture, including the 31.06-inch length of the bar, 6.3-inch width of the shades, and an adjustable maximum hanging height of 72 inches. It also indicates "Indoor" use and "3 x 100W E26" bulb requirements.
Керівництво по установці
Необхідні інструменти (не включені):
- Викрутка для головки Phillips
- Викрутка з плоскою головою
- Пристрої для зачистки дроту
- Ізоляційна стрічка
- Драбина
- Захисні окуляри
Покрокова установка:
- Вимкніть живлення: Before starting, ensure the power to the circuit at the circuit breaker or fuse box is completely OFF. This is a critical safety step.
- Підготуйте монтажну поверхню: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Install Mounting Crossbar: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is firmly secured.
- Відрегулюйте висоту підвіски: The length of each pendant cord can be adjusted. Determine the desired hanging height for each light. Loosen the set screw on the canopy where the cord enters, adjust the cord to the desired length, and then tighten the set screw to secure it. Repeat for all three pendants.
- Виконайте електричні з’єднання:
- Підключіть чорний дріт від світильника до чорний (Фазовий) провід від розподільної коробки за допомогою дротяної гайки.
- Підключіть білий дріт від світильника до білий (Нультральний) провід від розподільної коробки за допомогою дротяної гайки.
- Підключіть землю дріт (голий мідний або зелений) від світильника до землю wire from the junction box and to the mounting crossbar's ground screw.
- Ensure all wire nuts are securely tightened and connections are covered with electrical tape if necessary.
- Mount Fixture Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting screws on the crossbar and secure it in place using the provided cap nuts or screws.
- Встановити лампочки: Screw in three (3) incandescent bulbs with an E26 base, not exceeding 100 watts each.
- Відновлення живлення: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box. Test the fixture.

Image: EGLO Tarbes 3-Light Pendant installed over a kitchen island. This image demonstrates the fixture's appearance in a typical home environment, highlighting its use over a kitchen island.
Інструкція з експлуатації
This pendant light fixture operates with standard wall switches. Ensure appropriate E26 base incandescent bulbs (max 100W per bulb) are installed. The fixture is designed for use with 120V electrical systems.
- Увімкнення/вимкнення живлення: Використовуйте настінний вимикач, підключений до світильника, щоб увімкнути або вимкнути світло.
- Тип лампочки: Use E26 base bulbs. Incandescent bulbs up to 100 watts per socket are supported. For energy efficiency, LED or CFL bulbs with an E26 base can also be used, provided their wattage equivalent does not exceed 100W and they are compatible with the fixture's electrical system.
Технічне обслуговування
Прибирання:
- Завжди вимикайте живлення перед чищенням.
- Протріть прилад м’якою сухою тканиною.
- Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
Заміна лампи:
- Ensure the power is OFF and the bulbs have cooled completely before attempting to replace them.
- Обережно викрутіть стару лампочку з патрона.
- Вкрутіть нову лампочку з цоколем E26, переконавшись, що її потужність не перевищує 100 Вт.
- Відновіть живлення та перевірте нову лампочку.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Світло не вмикається. |
|
|
| Мерехтить світло. |
|
|
Інформація про гарантію
EGLO products are covered by a Гарантія 1 рік from the date of original shipment when purchased on Amazon. This warranty covers items and conditions identified in the original manufacturer's warranty. Additionally, a 30-day replacement parts policy is in place to ensure a fully working item.
Винятки: The warranty specifically does not cover loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Підтримка клієнтів
For further assistance, missing parts, or warranty claims, please contact EGLO customer support.
You can visit the official EGLO store on Amazon for more information and contact options: EGLO Amazon Store