eldom 72324PMP

Eldom 72324PMP 7-Liter Under-Sink Pressure-Resistant Water Heater User Manual

Model: 72324PMP | Brand: Eldom

1. Техніка безпеки

Please read these safety instructions carefully before installing, operating, or performing maintenance on the appliance. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

  • Installation and electrical connections must be performed by qualified personnel in accordance with local regulations.
  • Переконайтеся, що прилад належним чином заземлений.
  • Не використовуйте водонагрівач, якщо шнур живлення або вилка пошкоджені.
  • Always ensure the water heater is filled with water before switching on the power.
  • The pressure relief valve must be installed and maintained correctly to prevent excessive pressure build-up. Do not block or tampз клапаном.
  • Тримайте легкозаймисті матеріали подалі від приладу.
  • Цей прилад призначений лише для внутрішнього використання.

2. Продукт закінчивсяview

The Eldom 72324PMP is a compact 7-liter under-sink electric water heater designed for pressure-resistant operation. It features a durable steel tank with high-performance enamel and additional anode protection against corrosion, ensuring a long service life. An integrated anti-return valve prevents backflow and protects against overpressure. The continuous temperature regulator allows precise control over water temperature.

Eldom 72324PMP 7-Liter Under-Sink Water Heater

Figure 1: Eldom 72324PMP 7-Liter Under-Sink Water Heater. This image shows the compact design suitable for under-sink installation.

Ключові характеристики:

  • Ємність: 7 літра
  • Тип установки: Under-sink, pressure-resistant
  • Матеріал резервуара: Steel with high-performance enamel coating
  • Захист від корозії: Anode protection system
  • Безпека: Integrated anti-return valve and safety valve
  • Контроль температури: Continuous temperature regulator
  • Потужність: 1500 Вт
  • Енергоефективність: клас B

3. Технічні характеристики

Специфікація Значення
Номер моделі72324PMP
Ємність7 літра
Номінальна потужність1500 Вт
Номінальний випtage230 V / 50 Гц
Принцип діїUnder-sink, pressure-resistant
Номінальний тиск0.7 МПа (7 бар)
Максимальний робочий тиск8 барів
Підключення до води1/2 дюйма
Електричне підключенняКабель з вилкою
Індекс захистуIPX1
Розміри (В x Ш x Г)340 x 285 x 288 мм
вага5.8 kg (product) / 6 kg (item)
Heating Time (12 to 65°C)13 хвилин
Максимальна температура65 градусів Цельсія
Клас енергоефективностіB
Річне споживання електроенергії95 кВт / год
Рівень звукової потужності (у приміщенні)15 дБ
Eldom 72324PMP Energy Label

Figure 2: Energy Label for Eldom 72324PMP, indicating Class B efficiency and 95 kWh/annum consumption.

Для отримання детальнішої інформації про продукт зверніться до бази даних EPREL: https://eprel.ec.europa.eu/qr/85466

4. Налаштування

4.1 Розміщення

  • The water heater is designed for under-sink installation. Ensure there is sufficient space for the unit and its connections.
  • Mount the unit securely to a solid surface, such as a wall, using appropriate fasteners. The unit is designed for wall mounting.
  • Ensure the location is protected from freezing temperatures.

4.2 Підключення до води

Connect the water heater to the cold and hot water supply using 1/2 inch connections. It is crucial to install the supplied safety valve on the cold water inlet. This valve prevents excessive pressure build-up inside the tank.

  1. Install the safety valve on the cold water inlet pipe. Ensure the arrow on the valve points towards the water heater.
  2. Connect the cold water supply to the inlet of the safety valve.
  3. Connect the hot water outlet of the water heater to the hot water tap.
  4. Open the hot water tap to allow air to escape while the tank fills with water.
  5. Once water flows steadily from the hot water tap, close the tap. Check all connections for leaks.

4.3 Електричне підключення

The appliance comes with a power cable and plug. Ensure the electrical outlet is properly grounded and matches the voltage and frequency requirements (230V/50Hz).

  • Before plugging in the appliance, ensure the water tank is completely filled.
  • Підключіть шнур живлення до відповідної заземленої електричної розетки.
  • Не використовуйте подовжувачі або адаптери.

5. Операційна

5.1 Початковий запуск

After installation and filling the tank with water, the unit is ready for operation.

  1. Ensure the water heater is properly connected to both water and electricity.
  2. Turn on the power supply to the unit. The indicator light (if present) should illuminate.
  3. The water heater will begin heating the water to the set temperature. The initial heating cycle for 7 liters from 12°C to 65°C takes approximately 13 minutes.

5.2 Регулювання температури

The water heater is equipped with a continuous temperature regulator, usually a dial or knob on the front or bottom of the unit.

  • Rotate the temperature regulator to your desired setting. Higher settings will result in hotter water.
  • The thermostat will automatically maintain the set temperature.

6. Технічне обслуговування

Регулярне технічне обслуговування забезпечує оптимальну роботу та подовжує термін служби вашого водонагрівача. Завжди відключайте живлення перед виконанням будь-якого технічного обслуговування.

6.1 Регулярне очищення

  • Очистіть зовнішню частину пристрою м’якою, damp тканина. Не використовуйте абразивні засоби чи розчинники.
  • Periodically check the safety valve for proper operation. Refer to the safety valve manufacturer's instructions for testing.

6.2 Видалення накипу

Depending on water hardness, scale deposits may accumulate inside the tank and on the heating element, reducing efficiency. Descaling should be performed periodically by a qualified technician.

  • Disconnect the power supply and drain the water heater.
  • Access the heating element and tank interior to remove scale deposits.
  • Replace the anode rod if it is significantly depleted, as it is crucial for corrosion protection.

7. Вирішення проблем

Перш ніж звертатися до служби підтримки клієнтів, перевірте наступні поширені проблеми та способи їх вирішення:

проблема Можлива причина Рішення
Немає гарячої води Немає живлення; термостат встановлено на занадто низьку температуру; несправність нагрівального елемента. Check power supply and circuit breaker; adjust thermostat; contact service for element replacement.
Вода недостатньо гаряча Thermostat set too low; excessive hot water demand; scale build-up. Increase thermostat setting; allow time for reheating; consider descaling.
Water leaking from safety valve Normal expansion during heating; faulty valve. This is normal during heating. If continuous, check valve or contact plumber.
Незвичайні звуки Scale build-up; loose components. Consider descaling; contact service for inspection.

8. Гарантія та підтримка

This Eldom water heater is manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer.

Контактна інформація виробника:

  • Виробник: Елдомінвест
  • Webсайт: https://eldominvest.com/
  • Електронна пошта: tech@eldominvest.com
  • телефон: +359 52 571 914
  • Адреса: Boulevard "Vladislav Varnenchik" 275A, 9009 Varna, Bulgaria

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.