HOTONE TANLA2

Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Головна інструкція

1. Вступ

Дякуємо за покупкуasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampліфірник.

2. Інформація про безпеку

  • Джерело живлення: Use only the specified power adapter (18V DC, center negative).
  • Вентиляція: Забезпечте належну вентиляцію, щоб запобігти перегріву. Не закривайте вентиляційні отвори.
  • вологість: Не піддавайте пристрій впливу дощу, вологи або надмірної вологості.
  • Обробка: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
  • Обслуговування: Не намагайтеся обслуговувати цей пристрій самостійно. Довірте всі послуги кваліфікованому персоналу.
  • Підключення динаміка: Завжди підключайте amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. Продукт закінчивсяview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

Елементи керування передньої панелі

Hotone Nano Legacy Purple Wind front panel controls diagram
Рисунок 1: Елементи керування на передній панелі. This image displays the front panel of the Hotone Nano Legacy Purple Wind amplifier head, highlighting the input jack, Bass, Middle, Treble, Gain, and Volume knobs, and the On/Off switch.
  1. ВХОД: 1/4" mono jack to plug in your guitar.
  2. БАС: Controls the low frequency response.
  3. СЕРЕДНЯ: Controls the mid frequency response.
  4. СЛІД: Controls the high frequency response.
  5. ПІДИМОК: Controls the gain level.
  6. ОБ'ЄМ: Контролює вихідну гучність.
  7. Перемикач ON/OFF: Вмикає або вимикає пристрій.

Підключення задньої панелі

Hotone Nano Legacy Purple Wind rear panel connections diagram
Рисунок 2: З’єднання на задній панелі. This image shows the rear panel of the Hotone Nano Legacy Purple Wind amplifier head, detailing the 18V DC input, Phones/Line Output, AUX IN, FX Loop Send/Return, and Speaker Output.
  1. 18 В постійного струму: Plug in DC 18V adapter (center negative).
  2. ТЕЛЕФОН/ЛІНІЙНИЙ ВИХІД: 1/8" stereo jack, for using headphones or recording.
  3. AUX IN: 1/8" stereo jack, for connecting an external music player.
  4. FX LOOP RETURN: 1/4" mono jack, connect to your effects output jack.
  5. ВИХІД ДИНАМІКА: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
  6. FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp і потужність amp).

4. Налаштування

  1. Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampліфірник.
  2. Підключіть живлення: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
  3. Підключення гітари: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
  4. Початкові налаштування: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
  5. Увімкнення: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. Інструкція з експлуатації

  • Регулювання тону: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
  • Регулювання посилення: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
  • Регулювання гучності: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
  • Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp розділ.
  • Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
  • AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6. Технічне обслуговування

  • Прибирання: Для очищення використовуйте м’яку суху тканину amplifier's exterior. Do not use liquid cleaners or solvents.
  • Зберігання: Зберігайте ampЗберігайте виріб у сухому, прохолодному місці, подалі від прямих сонячних променів та екстремальних температур.
  • Догляд за трубкою: As a hybrid amplifier, преamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7. Вирішення проблем

проблемаМожлива причинаРішення
Ні звукуPower not connected, speaker not connected, volume/gain too low, faulty cable.Check power connection, ensure speaker is connected, increase volume/gain, test with different cables.
Слабкий або спотворений звукFaulty cable, incorrect impedance, worn preamp трубка.Test cables, ensure correct speaker impedance, consult technician for tube replacement.
Excessive hum/noiseЗаземлення, несправне джерело живлення, перешкоди від іншої електроніки.Try different power outlets, use a power conditioner, move away from other electronic devices.

8. Технічні характеристики

  • Вихідна ватtage: 5 Вт
  • Джерело живлення: Corded Electric (18V DC, center negative)
  • Вага товару: 15.5 унції
  • Розміри продукту: 2.34 x 5.03 x 2.95 дюймів
  • Сумісні пристрої: гітара
  • Тип роз'єму: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
  • Опір динаміка: 4-16 Ом
  • Номер моделі: TANLA2

9. Відео про продукти

OriPure 5W Tube Guitar Amplifier Зав

Опис відео: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.

The Joyo Jackman II Is Like A Tiny Marshall JCM 800.

Опис відео: Це відео надає детальну інформаціюview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.

OriPure 15W Tube Guitar Amplifier Head OA-H15

Опис відео: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.

JOYO Meteor II BanTamp Міні серії XL Amp Head 20 Watt

Опис відео: This video presents the JOYO Meteor II BanTamp Міні серії XL Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.

Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM

Опис відео: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.

JOYO 20W Amplifier Head BanTamP Series ATOMIC

Опис відео: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.

10. Гарантія та підтримка

For warranty information and technical support, please refer to the official Hotone webсайт або зверніться до авторизованого дилера. Зберігайте чек про покупку як підтвердження покупки.