вступ
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Інформація про безпеку
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Вміст упаковки
Перед початком встановлення перевірте наявність усіх компонентів:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Механізм засувки
- Strike plate (ASA Strike)
- Кріпильні гвинти
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Налаштування та встановлення
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Підготовка дверей
Ensure your door is prepared with the following standard dimensions:
- Поперечний отвір: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Назад: 2-3/4 дюйма (70 мм)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Закріпіть засувку за допомогою наданих гвинтів.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Закріпіть запірну пластину за допомогою наданих гвинтів.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Інструкція з експлуатації
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Примітка: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Технічне обслуговування
Regular maintenance ensures the longevity and smooth operation of your lock.
- Прибирання: Очистіть зовнішні поверхні м’якою губкоюamp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
- Змащення: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Огляд: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Важіль тугий або важко повертається. | Накопичення бруду або відсутність мастила. | Clean the mechanism and apply graphite lubricant. |
| Засувка не повністю втягується. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Двері деренчать при зачиненні. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | 129002 |
| Серія | Серія 2500 |
| Тип замка | Cylindrical Passage Lock (Non-locking) |
| матеріал | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Закінчити | Сатин Хром |
| Стиль важеля | Withnell |
| Назад | 2-3/4 дюйма (70 мм) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Орієнтація руки | Неручний |
| Оцінка | Grade 2 (Standard Duty Commercial) |
| Ударна пластина | Страйк ASA |
| Включені компоненти | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Інформація про гарантію
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Підтримка клієнтів
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webсайт: Visit the official Hager webсайт із ресурсами підтримки та контактною інформацією.
- Контакти: Refer to the packaging or Hager's webсайт для номерів телефонів або адрес електронної пошти.
When contacting support, please have your model number (129002) and purchase details available.