DEWALT DWE7480 10 in. Compact Job Site Table Saw

1. Продукт закінчивсяview

The DEWALT DWE7480 10 in. Compact Job Site Table Saw is designed for portability and durability on the job site. It features a powerful 15 Amp motor capable of cutting large and hardwood materials. The saw incorporates a Site-Pro Modular Guarding System for enhanced safety and ease of use. Its compact and lightweight design, coupled with a robust metal roll cage, ensures reliability in demanding work environments.

Рисунок 1.1: Загалом view of the DEWALT DWE7480 10-inch Compact Job Site Table Saw.

2. Ключові характеристики

• Rack and Pinion Telescoping Fence Rails: Allows for fast, smooth, and accurate fence adjustments.
• 24-1/2" Rip Capacity: Enables cutting of a variety of larger shelving and trim materials.
• Site-Pro Modular Guarding System: Provides tool-free guarding component adjustments for quick setup.
• Metal Roll Cage Base: Ensures enhanced durability and protection on job sites.
• Вбудована пам'ять: Conveniently stores Site-Pro Guarding components and push stick when not in use.

Figure 2.1: The table saw with its fence extended, demonstrating the 24-1/2 inch rip capacity.

3. Налаштування

1. Розпакування: Carefully remove the table saw and all components from the packaging. Inspect for any shipping damage.
2. Стабілізація: Place the saw on a stable, level surface. The metal roll cage provides a sturdy base.
3. Guard System Installation: The Site-Pro Modular Guarding System can be installed without tools. Align the guard with the designated slots and secure it. Refer to Figure 3.1 for proper guard placement.
4. Встановлення/перевірка леза: Ensure the 10-inch, 24-tooth carbide blade is securely installed. If replacing, use the provided wrenches to loosen and tighten the arbor nut.
5. Регулювання огорожі: Unlock the fence and slide it along the rack and pinion rails to the desired position. Lock the fence securely before operation.

Малюнок 3.1: Спереду view of the saw, highlighting the blade height and bevel adjustment wheels, and the power switch.

4. Інструкція з експлуатації

4.1. Увімкнення/вимкнення живлення

To power on the saw, press the green "ON" button. To power off, press the red "OFF" paddle switch. Always ensure the saw is off and unplugged before making any adjustments or maintenance.

Figure 4.1: Detail of the power switch, showing the "ON" and "OFF" controls.

4.2. Adjusting Blade Height and Bevel

• Висота леза: Use the large handwheel on the front of the saw to raise or lower the blade. Rotate clockwise to raise and counter-clockwise to lower.
• Blade Bevel (Angle): Loosen the bevel lock lever (typically on the front or side) and use the smaller handwheel or lever to tilt the blade to the desired angle (up to 45 degrees). Securely tighten the bevel lock lever before cutting.

Малюнок 4.2: Сторона view of the saw, illustrating the blade tilted for bevel cuts.

4.3. Using the Fence

The rack and pinion telescoping fence allows for precise adjustments. Unlock the fence, slide it to the desired measurement indicated on the scale, and then lock it firmly in place. Ensure the fence is parallel to the blade for accurate cuts.

Figure 4.3: The saw with its fence extended, ready for rip cutting operations.

4.4. Using the Miter Gauge

Insert the miter gauge into the miter slot on the table. Adjust the angle as needed for cross-cuts or angled cuts. Always hold the workpiece firmly against the miter gauge and the table during operation.

Рисунок 4.4: Кутовий view of the saw, showing the miter gauge in position for cross-cutting.

5. Технічне обслуговування

• Прибирання: Regularly clean sawdust and debris from the saw table, fence, and motor housing. Use a shop vacuum for dust collection.
• Перевірка леза: Periodically inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades promptly.
• Guard System Check: Ensure the Site-Pro Modular Guarding System operates smoothly and is free from obstructions.
• Змащення: Apply light machine oil to moving parts such as the blade height and bevel mechanisms as needed to ensure smooth operation.
• Перевірка шнура живлення: Check the power cord for any cuts, fraying, or damage before each use.

6. Вирішення проблем

7. Технічні характеристики

8. Гарантія та підтримка

This DEWALT DWE7480 Table Saw comes with a 3 роки обмеженої гарантії виробника. For detailed warranty information, service, or support, please refer to the official DEWALT webсайту або зв’яжіться з їхньою службою обслуговування клієнтів.

Офіційний посібник користувача (PDF) доступний для завантаження: Завантажити посібник користувача