Reer Simply Hot Bottle and Food Warmer Instruction Manual

1. Вступ

Thank you for choosing the Reer Simply Hot Bottle and Food Warmer. This device is designed to gently and uniformly warm baby bottles, milk, and food jars using a water bath method, preserving valuable nutrients. Please read this instruction manual carefully before first use and keep it for future reference. Proper use and maintenance will ensure the longevity and safe operation of your warmer.

Figure 1: The Reer Simply Hot Bottle and Food Warmer, featuring a white and grey design with a control dial.

2. Техніка безпеки

Щоб забезпечити безпечну роботу та запобігти травмам або пошкодженням, завжди дотримуйтесь наступних правил безпеки:

• Always place the appliance on a dry, stable, and level surface.
• Ensure there is sufficient water in the heating chamber when warming food or bottles. The internal water reservoir should be filled to approximately 1 cm from the rim of the container when a bottle or jar is inserted.
• Не занурюйте прилад, шнур або вилку у воду чи інші рідини.
• Цей прилад не призначений для використання особами (включно з дітьми) з обмеженими фізичними, сенсорними чи розумовими здібностями, або з браком досвіду та знань, якщо вони не перебувають під наглядом або не отримали інструкцій щодо використання приладу особою, відповідальною за їх безпеку. .
• Слідкуйте за дітьми, щоб переконатися, що вони не граються з пристроєм.
• Always check the temperature of the food or milk before feeding your baby.
• The appliance features a protective heating plate cover to prevent direct contact with heating coils and reduce the risk of burns.
• A thermostat shut-off function prevents the warmer from overheating.
• Unplug the appliance from the outlet when not in use and before cleaning. Allow it to cool before putting on or taking off parts, and before cleaning the appliance.
• Не використовуйте будь-який прилад із пошкодженим шнуром чи вилкою, а також після того, як прилад вийшов з ладу чи був будь-яким чином пошкоджений.

3. Продукт закінчивсяview

The Reer Simply Hot Bottle and Food Warmer is designed for ease of use and safety. Key components include:

• Heating Plate Cover: Protects the heating element and prevents direct contact.
• Optical Control Light: Indicates the operational status of the device (heating/keep-warm).
• Stepless Temperature Control Dial: Allows for precise temperature adjustment for different warming needs.
• Вбудований кабельний намотувач: Located at the base for tidy and space-saving storage.

Figure 2: This diagram illustrates the safety heating plate cover, the optical control light for operational status, and the convenient cable winder located at the base of the unit.

4. Налаштування

Before using your Reer Simply Hot warmer for the first time, follow these steps:

1. Unpack the warmer and remove all packaging materials.
2. Place the warmer on a stable, level, and heat-resistant surface.
3. Unwind the necessary length of the power cord from the integrated cable winder at the base of the unit.
4. Підключіть шнур живлення до відповідної електричної розетки.

Figure 3: The underside of the warmer, showing the practical cable winder for neat storage of the power cord.

5. Інструкція з експлуатації

The Reer Simply Hot warmer is designed for easy, one-handed operation.

5.1 Warming Milk/Formula

1. Place the baby bottle into the heating chamber. The warmer accommodates standard and wide-neck bottles up to 70 mm in width.
2. Fill the heating chamber with water up to approximately 1 cm below the rim of the bottle. Use a measuring cup for precise filling to avoid spills.
3. Turn the control dial to the bottle icon setting. The optical control light will illuminate, indicating the warming process has begun.
4. Milk typically warms in 6 to 8 minutes. The warming time may vary depending on the initial temperature and volume of the milk.
5. Once warmed, remove the bottle carefully. The control light will turn off when the desired temperature is reached or the warming cycle is complete.
6. Always shake the bottle gently to ensure even heat distribution and test the milk temperature on your wrist before feeding your baby.

5.2 Warming Baby Food Jars

1. Place the baby food jar (without lid) into the heating chamber. The warmer accommodates jars up to 70 mm in width.
2. Fill the heating chamber with water up to approximately 1 cm below the rim of the jar.
3. Turn the control dial to the food jar icon setting. The optical control light will illuminate.
4. Baby food typically warms in 8 to 10 minutes. Warming time may vary.
5. Once warmed, carefully remove the jar. The control light will turn off.
6. Stir the food thoroughly to ensure even heat distribution and test the temperature before feeding your baby.

5.3 Keep-Warm Function

The warmer features a practical keep-warm function. After reaching the set temperature, the device will maintain the temperature, allowing you to prepare food or milk in advance. The optical control light will cycle on and off to indicate that the keep-warm function is active and maintaining the temperature.

Figure 4: Close-up of the control dial for stepless temperature adjustment and the optical indicator light.

Малюнок 5: А view into the heating chamber of the Reer Simply Hot warmer, where bottles or food jars are placed for warming.

6. Технічне обслуговування та очищення

Regular cleaning ensures hygienic operation and extends the life of your warmer.

• Завжди відключайте прилад від мережі та дайте йому повністю охолонути перед чищенням.
• Протріть обігрівач рекламою зовніamp тканина. Не використовуйте абразивні засоби чи розчинники.
• To clean the heating chamber, wipe it with a damp cloth. For stubborn residue, use a mild detergent and rinse thoroughly. Ensure no water enters the electrical components.
• To prevent limescale buildup, especially in areas with hard water, regularly descale the heating chamber. You can use a descaling solution suitable for kitchen appliances or a mixture of water and white vinegar. Follow the descaling product's instructions.
• Ніколи не занурюйте весь пристрій у воду.
• Store the warmer in a dry place, using the cable winder for neat cord storage.

7. Вирішення проблем

If you encounter issues with your Reer Simply Hot warmer, refer to the table below:

8. Технічні характеристики

9. Гарантія та підтримка

Reer products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty details. Spare parts are generally available for a period of 1 year from the date of purchase.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Reer customer service department. Contact information can typically be found on the Reer official webсайт або упаковку вашого продукту.

Будь ласка, підготуйте номер вашої моделі (3310) та підтвердження покупки, коли звертаєтесь до служби підтримки.