Fluke Networks DSX-5000 120 Cable Analyzer Module

вступ

This manual provides essential information for the proper setup, operation, and maintenance of your Fluke Networks DSX-5000 120 Cable Analyzer Module. The DSX-5000 120 is a professional tool designed for comprehensive cable certification, endpoint testing, and wire mapping, supporting up to 40 Gbps data rates. It includes a set of CAT 6A/Class EA Permanent Link Adaptors for robust testing.

Вміст упаковки

Перевірте наявність усіх предметів у вашій упаковці:

• (2) DSX-5000 CableAnalyzer Modules (Mainframe & Remote)
• (2) AC Chargers
• (2) Hand Straps
• (2) Headsets
• (2) Shoulder Straps
• (2) Universal Couplers
• Set of CAT 6A/Class EA Permanent Link Adaptors
• Чохол для транспортування
• Інтегрований Wi-Fi
• Інтерфейсний кабель USB

Налаштування

1. Початкова зарядка: Connect both DSX-5000 modules to their respective AC chargers. Allow sufficient time for a full charge before first use. The charging indicator on the device will provide status.
2. Attach Hand/Shoulder Straps: Securely attach the hand straps or shoulder straps to the modules for comfortable and safe handling during operation.
3. Connect Adaptors: For permanent link testing, attach the CAT 6A/Class EA Permanent Link Adaptors to the test ports of both the mainframe and remote units. Ensure a firm connection.
4. Увімкнення: Press and hold the power button on each module until the LCD display illuminates.

Інструкція з експлуатації

1. Навігація: Use the integrated LCD touchscreen display to navigate through menus and select test functions.
2. Selecting a Test: From the main menu, select the desired test type: Cable Certification, Endpoint Testing, або Відображення проводів.
3. Configuring Test Parameters: Follow the on-screen prompts to configure test parameters such as cable type (e.g., CAT 6A), test limits (e.g., Class EA), and other relevant settings.
4. Connecting to Cable: Connect the Permanent Link Adaptors to the cable under test. Ensure a secure connection at both ends (mainframe and remote).
5. Проведення тесту: Initiate the test from the mainframe unit. The device will perform the selected measurements and display the results on the LCD screen.
6. Data Safe Monitor: The integrated Data Safe Monitor feature helps protect test results and configurations. Refer to the on-screen help for specific usage.
7. Збереження результатів: Test results are automatically saved. Use the integrated Wi-Fi or USB interface cable to transfer data to a computer for reporting and analysis using LinkWare software (not included).

Технічне обслуговування

• Прибирання: Використовуйте м'який, damp cloth to clean the exterior of the modules and the LCD screen. Avoid abrasive cleaners or solvents. Ensure all ports are free of dust and debris.
• Догляд за акумулятором: For optimal battery life, avoid fully discharging the units frequently. Store the units with a partial charge if not in use for extended periods.
• Оновлення програмного забезпечення: Періодично перевіряйте мережі Fluke website for firmware and software updates to ensure your DSX-5000 120 operates with the latest features and performance enhancements. Use the USB interface cable or Wi-Fi for updates.
• Adaptor Inspection: Regularly inspect the CAT 6A/Class EA Permanent Link Adaptors for wear or damage. Damaged adaptors can affect test accuracy and should be replaced.

Усунення несправностей

If you encounter issues with your DSX-5000 120, refer to the following common troubleshooting steps:

• Пристрій не вмикається: Ensure the battery is charged. Connect the AC charger and attempt to power on again.
• Test Fails or Inaccurate Results:
  • Verify that the correct test parameters (e.g., cable type, limits) are selected.
  • Inspect the Permanent Link Adaptors and test cables for damage or improper connection.
  • Ensure the cable under test is properly terminated and free from faults.
• Пристрій зависає або перестає реагувати: Perform a power cycle by holding the power button until the device shuts down, then restart it. If the issue persists, ensure the firmware is up to date.
• Cannot Set Reference: This may indicate an issue with the adaptors or the device calibration. Ensure adaptors are clean and properly connected. If the problem continues, contact Fluke Networks support.

For further assistance, consult the comprehensive user guide available on the Fluke Networks webсайт або зверніться до їхньої технічної підтримки.

Технічні характеристики

Гарантія та підтримка

For information regarding product warranty, technical support, or service, please contact Fluke Networks directly. Details can typically be found on the official Fluke Networks website or within the product registration materials.