Телескопічна підставка Labconco 3613201 Інструкція користувача

Продукт закінченийview

This manual provides instructions for the Labconco 3613201 Telescoping Base Stand, designed to support 3' Purifier Stainless Steel Horizontal Clean Benches. This robust stand offers adjustable height and mobility options for laboratory environments.

Ключові характеристики

• Features rear crossbar supports for enhanced stability.
• Available with fixed leveling feet or 5-inch diameter, toe-locking, non-marking polyurethane casters with bearings for quiet operation.
• Designed to support loads up to 1000 pounds (453.6 kg).
• Legs are adjustable in 1-inch (2.54 cm) increments from 27.5 to 34.5 inches (69.85 to 87.63 cm).

Зображення продукту

An image of the Labconco 3613201 Telescoping Base Stand. The stand is constructed from light-colored metal tubing, forming a rectangular frame with four adjustable legs. Each leg is equipped with a black, toe-locking caster wheel. The frame includes horizontal and diagonal crossbar supports for structural integrity.

Інформація про безпеку

Read all instructions carefully before assembly and operation. Ensure all components are securely fastened. Do not exceed the maximum load capacity of 1000 pounds (453.6 kg). Use caution when adjusting height or moving the stand, especially with equipment in place. Always ensure the stand is stable before use.

Налаштування та збірка

Розпакування

Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (refer to your product's specific packing list). Inspect for any shipping damage before proceeding with assembly.

Етапи складання

1. Identify the main frame components and leg sections.
2. Attach the casters or leveling feet to the bottom of each leg section. Ensure they are securely tightened using appropriate tools.
3. Insert the adjustable leg sections into the main frame.
4. Secure the leg sections at the desired height using the provided fasteners (e.g., bolts, pins). Ensure all four legs are set to the exact same height for optimal stability.
5. Verify all connections are tight and the stand is stable and level before placing any equipment on it.

Інструкція з експлуатації

Регулювання висоти

To adjust the height of the stand, ensure any equipment is removed or securely supported to prevent tipping. Loosen the fasteners on each leg, adjust the leg to the desired 1-inch increment, and re-tighten the fasteners securely. Always adjust all four legs evenly to maintain stability and prevent uneven loading.

Mobility (with Casters)

If your stand is equipped with casters, unlock the toe-locking mechanism on each caster before moving the stand. When the stand is in the desired position, engage the toe-locking mechanism on all casters to prevent unintended movement and ensure stability.

Stability (with Leveling Feet)

If your stand uses fixed leveling feet, ensure the stand is placed on a level surface. Adjust the leveling feet as necessary by rotating them to eliminate any wobbling and ensure maximum stability. All feet should be firmly in contact with the floor.

Технічне обслуговування

прибирання

Clean the stand regularly with a mild detergent and a soft cloth. Avoid abrasive cleaners, harsh chemicals, or solvents that may damage the finish or material of the stand.

Огляд

Periodically inspect all fasteners, casters, and leveling feet for signs of wear, damage, or looseness. Tighten any loose connections immediately. Check casters for smooth operation and ensure their locking mechanisms engage properly.

Lubrication (for Casters)

If casters become stiff or difficult to swivel, apply a small amount of silicone-based lubricant to the swivel and wheel bearings. Do not over-lubricate.

Усунення несправностей

Stand is Unstable/Wobbles

• Ensure all four legs are adjusted to the exact same height.
• Verify all assembly fasteners are securely tightened.
• If using leveling feet, adjust them to compensate for uneven floor surfaces until the stand is stable.
• If using casters, ensure all toe-locks are fully engaged when the stand is stationary.

Ролики не котяться плавно

• Check for debris (e.g., dust, hair) or obstructions in the caster wheels and remove them.
• Lubricate the caster swivel and wheel bearings if necessary (refer to Maintenance section).
• Ensure casters are not locked by their toe-locking mechanism.

Технічні характеристики

Примітка: Технічні характеристики можуть бути змінені без попередження.

Гарантія та підтримка

For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact Labconco directly. Contact details can typically be found on the manufacturer's official webсайт (www.labconco.com). Please have your model number and purchase date available when contacting support.