вступ
This manual provides essential instructions for the installation, operation, and maintenance of your Urmet 1133/1 Electronic Intercom Handset Atlantique. Please read this guide thoroughly before attempting to install or operate the device to ensure proper function and safety. This handset is designed for clear audio communication within an intercom system.
Продукт закінченийview
Image: The Urmet 1133/1 Electronic Intercom Handset Atlantique, shown in white, featuring a classic design with a receiver and base unit.
The Urmet 1133/1 is an electronic intercom handset, part of the Atlantique series, designed for reliable audio communication in residential or commercial intercom systems. It features a robust construction and simple interface for user convenience.
Налаштування
Proper installation is crucial for the optimal performance of your Urmet 1133/1 intercom handset. It is recommended that installation be performed by a qualified technician.
1. Mounting the Handset
- Choose a suitable location on a wall, typically near an entrance or in a central area, ensuring it is within reach and at an appropriate height.
- Mark the drilling points using the handset's mounting plate as a template.
- Просвердліть отвори та вставте дюбелі, якщо необхідно.
- Secure the mounting plate to the wall using appropriate screws.
2. Підключення проводів
- Before making any electrical connections, ensure the main power supply to the intercom system is turned OFF at the circuit breaker.
- Refer to the wiring diagram provided with your specific intercom system for correct terminal connections. The Urmet 1133/1 typically connects to the main intercom bus with specific terminals for audio in, audio out, call signal, and door release (if applicable).
- Carefully strip the insulation from the wires and connect them to the corresponding terminals on the handset's base unit. Ensure all connections are secure and free from short circuits.
- Once wiring is complete, attach the handset to the mounting plate.
3. Увімкнення та перевірка
- Restore power to the intercom system.
- Test the handset by initiating a call from the outdoor unit or another internal unit.
- Verify that the call tone is audible, two-way speech is clear, and any associated functions (e.g., door release) operate correctly.
Інструкція з експлуатації
The Urmet 1133/1 handset provides straightforward operation for managing intercom calls.
Отримання дзвінка
- When a visitor presses the call button on the outdoor unit, the handset will emit a distinctive ring tone.
- Lift the handset from its cradle to answer the call.
- Speak clearly into the microphone and listen for the visitor's response.
- To end the conversation, simply replace the handset in its cradle.
Door Release Function (if applicable)
- During an active conversation, press the dedicated door release button (if present on your model) to unlock the entrance.
- Двері зазвичай залишаються відімкненими протягом короткого періоду часу, перш ніж автоматично знову заблокуватися.
Технічне обслуговування
Regular maintenance ensures the longevity and reliable performance of your intercom handset.
прибирання
- Clean the exterior of the handset with a soft, dry, or slightly damp тканина.
- Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the plastic surfaces.
- Ensure no liquid enters the internal components of the handset.
Загальний догляд
- Уникайте падіння телефону та сильних ударів.
- Keep the handset away from excessive moisture, direct sunlight, and extreme temperatures.
- Do not attempt to open the handset casinг, оскільки це може призвести до анулювання гарантії та наражати вас на небезпеку ураження електричним струмом.
Усунення несправностей
If you encounter issues with your Urmet 1133/1 handset, refer to the following common problems and solutions.
| проблема | Можлива причина | Рішення |
|---|---|---|
| No sound from handset speaker or microphone. | Loose wiring connection; faulty handset; system power issue. | Check wiring connections at the handset and main system. Ensure system power is on. If problem persists, contact a qualified technician. |
| Handset does not ring when called. | Incorrect wiring; call button on outdoor unit not functioning; system fault. | Verify call signal wiring. Test the outdoor unit's call button. Consult system manual or technician. |
| Door release function not working. | Door release wiring issue; faulty door strike/lock; system fault. | Check door release wiring. Ensure the door strike/lock is receiving power and functioning. Contact a technician if necessary. |
| Перешкоди або погана якість звуку. | Electrical interference; damaged wiring; faulty components. | Ensure wiring is properly shielded and away from power cables. Inspect wiring for damage. If problem persists, professional inspection is recommended. |
Технічні характеристики
Key technical specifications for the Urmet 1133/1 Electronic Intercom Handset Atlantique:
- Виробник: УРМЕТ
- Номер моделі: 1133/1
- колір: Білий
- Розміри упаковки: 25.4 x 10.4 x 6.6 см (10 x 4.1 x 2.6 дюйма)
- Вага товару: Approximately 399.16 grams (0.88 pounds)
- Кількість товарів: 1
- Battery(ies) Included: немає
- Battery(ies) Required: немає
- Знято з виробництва виробником: немає
- Наявність запасних частин: Інформація недоступна
- Гарантія оновлень програмного забезпечення до: Інформація недоступна
- Дата першої доступності на Amazon.com.be: 11 вересня 2015 р
Гарантія та підтримка
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Urmet products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, spare parts, or service inquiries, please contact Urmet customer service or visit the official Urmet website. Ensure you have your model number (1133/1) and purchase details ready when contacting support.
Urmet Official Webсайт: www.urmet.com (Please note: This link is a general example and may need to be updated to a region-specific Urmet site for accurate support.)
