SEM 15163

SEM Presidio Interior Paint Aerosol (Model 15163) Instruction Manual

Brand: SEM | Model: 15163

вступ

This manual provides detailed instructions for the safe and effective use of the SEM Presidio Interior Paint Aerosol, Model 15163. This product is designed for coating interior surfaces such as metal, plastic, and vinyl, offering a matte finish. Please read all instructions carefully before use.

SEM Presidio Interior Paint Aerosol can and color swatch

Image: SEM Presidio Interior Paint Aerosol can, 12 oz, with a black color swatch. The label indicates "COLOR COAT Flexible Coating" and model number 15163.

Інформація про безпеку

УВАГА: This product is an extremely flammable aerosol. Contents under pressure. Vapors may cause flash fire. Harmful if swallowed. Vapors harmful. Causes serious eye irritation. Causes skin irritation. Read all cautions on the back panel of the can before use.

  • Використовувати в добре провітрюваному приміщенні.
  • Тримати подалі від тепла, іскор, відкритого вогню та гарячих поверхонь. Не палити.
  • Не проколюйте та не спалюйте контейнер.
  • Не піддавайте дії температур, що перевищують 49°C (120°F).
  • Використовуйте відповідні засоби індивідуального захисту, включаючи рукавички та засоби захисту очей.
  • Avoid breathing vapors or spray mist.
  • Зберігати в недоступному для дітей місці.
  • Утилізуйте вміст/контейнер відповідно до місцевих правил.

Пропозиція 65 Попередження: Цей продукт може містити хімічні речовини, відомі штату Каліфорнія, що спричиняють рак та вроджені вади або інший репродуктивний шкоду.

Налаштування та підготовка

  1. Очищення поверхні: Thoroughly clean the surface to be painted with a suitable wax and grease remover. Ensure the surface is free of dirt, oil, wax, and other contaminants.
  2. Підготовка поверхні: For optimal adhesion, lightly abrade smooth surfaces with fine-grit sandpaper (e.g., 400-600 grit wet/dry) or a scuff pad. Re-clean the abraded surface to remove any dust.
  3. Маскування: Mask off any areas not intended for painting using painter's tape and masking paper or plastic.
  4. Умови навколишнього середовища: Ensure the application area is well-ventilated. Apply paint in a temperature range of 50°F to 85°F (10°C to 29°C) and moderate humidity. Avoid direct sunlight or extremely humid conditions.
  5. Тестовий спрей: Always perform a test spray on an inconspicuous area or a test panel to verify color match and adhesion before applying to the main surface.

Інструкція з експлуатації (застосування)

  1. Струсіть банку: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during application.
  2. Техніка застосування: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply light, even coats using a steady, sweeping motion. Overlap each pass slightly for uniform coverage.
  3. Кілька шарів: Apply 2-3 light coats to achieve desired color and coverage. Allow sufficient flash-off time between coats (typically 5-10 minutes, or until the surface is tacky but not wet).
  4. Час висихання: The paint will be dry to the touch within an hour. For full cure and maximum durability, allow 24 hours. Avoid handling or exposing the painted surface to moisture during the curing process.

Технічне обслуговування та зберігання

  • Can Clean-up: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean.
  • Зберігання: Store the aerosol can in a cool, dry place between 50°F and 85°F (10°C and 29°C). Do not store in direct sunlight or where temperatures may exceed 120°F (49°C).
  • Утилізація: Dispose of empty cans or unused product according to local hazardous waste regulations.

Усунення несправностей

проблемаМожлива причинаРішення
Нерівномірне покриття / СмугиImproper shaking, inconsistent spray distance, too thick coats.Shake can thoroughly. Maintain consistent 8-10 inch distance. Apply multiple light coats.
Погана адгезіяInadequate surface cleaning or preparation.Ensure surface is clean and free of contaminants. Lightly abrade smooth surfaces.
Засмічення форсункиPaint dried in nozzle.Invert can and spray until clear propellant appears after each use. If clogged, try soaking nozzle in mineral spirits.
Drips or RunsApplying too much paint in one coat, holding can too close.Apply thinner coats. Increase spray distance to 8-10 inches.

Технічні характеристики продукту

  • Бренд: SEM
  • Назва моделі: Президіо
  • Номер деталі: 15163
  • колір: Black (Presidio)
  • Тип обробки: Матовий
  • Форма товару: Аерозоль
  • Обсяг предмета: 12 рідких унцій (340 г)
  • Особливе використання: Внутрішні поверхні
  • Рекомендація щодо поверхні: Metal, Plastic, Vinyl
  • Особливості: Fade Resistant, Low VOC
  • Покриття: Високий
  • Dry Time (Touch): Приблизно 1 година
  • Час повного затвердіння: 24 години
  • Рівень водонепроникності: Не водостійкий
  • Вага товару: 1 фунт
  • Розміри упаковки: 8.11 x 2.56 x 2.56 дюймів

Інформація про гарантію

No specific warranty information is provided in the product details. For details regarding product warranty, please contact SEM directly or refer to their official webсайт.

Підтримка клієнтів

For technical assistance, product inquiries, or safety data sheets, please contact the manufacturer:

Виробник: SEM

Please visit the official SEM webсайт для отримання контактної інформації та додаткових ресурсів.

© 2023 SEM Products. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.