SEM 39357 Flexible Urethane Foam

Продукт закінченийview

SEM 39357 Flexible Urethane Foam is a two-component black foam designed to replicate OEM foams used for sound deadening applications. This product is formulated to stop vibration and dampen sound in most voids.

Ключові особливості:

• New formulation for enhanced performance.
• Duplicates OEM foam characteristics.
• Effective for sound deadening.

Image: SEM 39357 Flexible Urethane Foam in its packaging, showing the main product and a smaller companion product (39352).

Інформація про безпеку

УВАГА: Цей продукт може містити хімічні речовини, зокрема сажу, яка, як відомо в штаті Каліфорнія, викликає рак. Для отримання додаткової інформації перейдіть за посиланням www.P65Warnings.ca.gov.

Always wear appropriate personal protective equipment (PPE) including gloves, eye protection, and respiratory protection when handling this product. Ensure adequate ventilation in the work area. Refer to the Safety Data Sheet (SDS) for complete safety information.

Налаштування

1. Підготовка поверхні: Ensure the application surface is clean, dry, and free of grease, oil, dust, and other contaminants. For optimal adhesion, surfaces may require light sanding and cleaning with an appropriate solvent.
2. температура: For best results, apply the foam at room temperature (65-75°F / 18-24°C).
3. Підготовка продукту: Before use, ensure both components of the urethane foam are at the recommended temperature. Attach the mixing nozzle securely to the cartridge.
4. Dispensing Gun: Load the cartridge into a suitable two-component dispensing gun. Dispense a small amount of material onto a disposable surface until a consistent, uniform color is achieved, indicating proper mixing.

Image: Close-up of the SEM 39357 Flexible Urethane Foam cartridge, highlighting the dual-mix design and the attached mixing nozzle.

Інструкція з експлуатації

Once the product is prepared and the mixing nozzle is attached, apply the foam directly into the desired void or area. The foam will expand and cure, providing sound deadening and vibration dampполивальні властивості.

• застосування: Apply steadily and evenly. Avoid overfilling as the foam will expand.
• Час роботи: The working time for this product is approximately 25 minutes. Plan your application accordingly.
• Встановити час: The foam will begin to set within 30 minutes. Avoid disturbing the applied foam during this period.
• Paint Time: The foam can be painted after 30 minutes, if desired.

Технічне обслуговування

• Зберігання: Store the product in a cool, dry place away from direct sunlight and extreme temperatures. Ensure caps are securely replaced on unused cartridges.
• Nozzle Disposal: Dispose of used mixing nozzles properly after each use, as they cannot be reused once the material has cured inside.
• Очищення обладнання: Clean dispensing guns and any tools immediately after use with an appropriate solvent before the foam cures.

Усунення несправностей

• Poor Mixing/Inconsistent Cure:

  Випуск: Foam does not cure properly or remains tacky.

  рішення: Ensure the mixing nozzle is correctly attached and that a sufficient amount of material was purged before application to ensure proper component ratio. Verify product temperature is within recommended range.
• Insufficient Expansion:

  Випуск: Foam does not expand as expected.

  рішення: Check product temperature. Cold product may not expand fully. Ensure the cartridge is not expired.

• Засмічене сопло:

  Випуск: Material flow is restricted or stops.

  рішення: Replace the mixing nozzle. Do not attempt to clear a clogged nozzle by force, as this may damage the cartridge or dispensing gun.

Технічні характеристики

Гарантія та підтримка

For specific warranty information regarding the SEM 39357 Flexible Urethane Foam, please refer to the product packaging or contact SEM directly. General product support and technical assistance can be obtained through the manufacturer's official webсайт або канали обслуговування клієнтів.

Виробник: SEM

Webсайт: www.semproducts.com (Вихampле, фактичний URL може відрізнятися)