1. Інформація про безпеку
Будь ласка, уважно прочитайте всі інструкції перед встановленням та використанням. Недотримання цих інструкцій може призвести до пошкодження майна, травм або смерті.
УВАГА: Цей продукт містить хімічні речовини, які, як відомо штату Каліфорнія, спричиняють рак та вроджені дефекти або інші репродуктивні порушення. Для отримання додаткової інформації перейдіть до www.P65Warnings.ca.gov.
Always exercise caution when dispensing hot water to prevent burns. Keep children away from the dispenser during operation.
2. Продукт закінчивсяview
The InSinkErator Indulge Contemporary F-HC1100 Instant Hot and Cold Water Dispenser Faucet in Chrome is designed to provide convenient access to near-boiling and cool drinking water. Its contemporary design features a high-arching swivel spout and two integrated levers.
Ключові характеристики:
- Подвійна функціональність: Dispenses both near-boiling hot water and filtered cold water.
- Міцна конструкція: Made from solid brass for longevity and corrosion resistance.
- Поворотний вилив: 360-degree swivel for easy filling of various containers.
- Safety Hot Lever: Features an instant self-closing valve for safe hot water dispensing.
- Stay-On Cool Lever: Conveniently remains on for continuous cold water flow.
- Designer Finish: Chrome finish complements modern kitchen aesthetics.
Figure 2.1: InSinkErator F-HC1100C Contemporary Instant Hot & Cold Water Dispenser in Chrome.
3. Налаштування та встановлення
This section provides general guidance for installing your InSinkErator F-HC1100C dispenser. For detailed, model-specific instructions, always refer to the complete manual included with your product. Professional installation is recommended.
3.1 Контрольний список перед установкою
- Ensure countertop thickness is 3 inches or less.
- Verify a standard 1-3/8 inch to 1-1/2 inch diameter hole is available for the faucet.
- Confirm a grounded electrical outlet is available under the sink.
- Ensure adequate clearance for dispenser handles to operate fully.
- The InSinkErator HWT-F1000S Hot Water Tank and Filtration System (sold separately) is required for operation.
3.2 Етапи встановленняview
- Вимкніть подачу води: Знайдіть і закрийте кран подачі холодної води під раковиною.
- Prepare Faucet: Unpack all faucet components. Carefully straighten the copper tubing. Ensure the black O-ring is properly seated in the base of the dispenser head.
- Гора Фаусет: Feed the tubes down through the countertop hole. Secure the faucet from underneath the sink using the circular mounting plate and hex nut. Tighten by hand, then use the supplied hex tool for final tightening, ensuring the faucet is at the desired angle.
- Mount Tank: Select a vertical mounting spot under the sink, within 16 inches of faucet water lines and 30 inches of a grounded outlet. Mark screw locations, pre-drill pilot holes, and install screws leaving about a quarter inch exposed. Hang the tank on the screws and tighten, but do not overtighten.
- Підключіть кран до бака: Connect the blue, white, and clear tubes from the faucet to their corresponding fittings on the tank. Push the blue tube connector down until it clicks into place.
- Final Water Connection: Install a T-fitting (not included) onto the existing cold water supply line. A dedicated water control valve with a 1/4-inch compression fitting is recommended. Connect the copper inlet tubing to the T-fitting using the compression nut.
- Відновлення водопостачання та електропостачання: Turn on the water supply. Open the hot water faucet to fill the tank until water flows through the spout. Plug the tank's power cord into the grounded electrical outlet. The tank will begin heating the water.
Video 3.1: Official InSinkErator Installation Guide for Instant Hot & Cold Water Dispenser. This video provides a visual walkthrough of the installation process.
Figure 3.1: The InSinkErator faucet installed on a kitchen counter, ready for use.
4. Інструкція з експлуатації
The InSinkErator F-HC1100C is designed for simple and safe operation.
4.1 Видача гарячої води
- Place a heat-safe cup or container under the faucet spout.
- Push the hot water lever (typically marked with red) back and hold it. Hot water will dispense.
- Release the lever to stop the flow. The hot water lever is designed to automatically shut off for safety.
Figure 4.1: Dispensing hot water for instant meals.
4.2 Подача холодної води
- Place a cup or container under the faucet spout.
- Push the cold water lever (typically marked with blue) forward. Cold water will dispense.
- The cold water lever will remain on until manually pushed back to the off position.
Figure 4.2: Using the cold water dispenser for drinking water.
5. Технічне обслуговування
Регулярне технічне обслуговування забезпечує оптимальну продуктивність та довговічність вашого диспенсера.
5.1 Заміна фільтра
If using the optional InSinkErator HWT-F1000S Hot Water Tank and Filtration System, filter cartridges (e.g., F-201R) should be replaced periodically according to the filter manufacturer's recommendations or when water flow noticeably decreases.
- Refer to your filtration system's manual for specific filter replacement instructions.
- Always turn off the water supply to the filtration system before attempting to replace the filter.
Малюнок 5.1: Впрample of an InSinkErator water filtration system.
5.2 Очищення
- Очистіть зовнішню частину крана м’якою губкоюamp cloth and mild soap. Avoid abrasive cleaners that may damage the finish.
- Periodically check for any leaks around connections and tighten if necessary.
6. Вирішення проблем
If you encounter issues with your InSinkErator F-HC1100C, refer to the following common troubleshooting steps:
| проблема | Можлива причина | Рішення |
|---|---|---|
| No hot water / Water not hot enough | Power not connected, water supply off, thermostat setting too low, tank not filled. | Check power connection and outlet. Ensure water supply is on. Adjust thermostat on the hot water tank. Open hot water faucet to fill tank until water flows. Allow 15-20 minutes for water to heat. |
| Вода капає з носика | Air in the system, sediment buildup, faulty valve. | Dispense hot water for 2-3 minutes to clear air. If dripping persists, contact customer support. |
| Малий потік води | Clogged filter, kinked water line, low water pressure. | Replace water filter cartridge. Check water lines for kinks. Verify household water pressure. |
| Витоки з з'єднань | Нещільні з'єднання, пошкоджені кільця ущільнювачів. | Carefully tighten connections. If leaks persist, inspect O-rings for damage and replace if necessary. |
If these steps do not resolve the issue, please contact InSinkErator Customer Support.
7. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | F-HC1100C |
| Колір | Chrome |
| матеріал | Латунь |
| Capacity (Tank) | 2.5 Liters (Tank sold separately) |
| Розміри продукту | 18"D x 3.56"W x 11"H (Faucet) |
| Стиль | Гаряче і холодне |
| вага | 3.7 Pounds (Faucet) |
| Wattage | 750 watts (Tank) |
| Тип установки | Під Раковиною |
| Кількість ручок | 2 |
| Верхня температура | 190 градусів за Фаренгейтом |
| Джерело живлення | Провідний електричний |
8. Гарантія та підтримка
8.1 Інформація про гарантію
The InSinkErator F-HC1100C Instant Hot and Cold Water Dispenser is covered by an exclusive 5-Year "We Come to You" In-Home Full Service Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period. Please refer to the official warranty documentation included with your product for complete details and terms.
8.2 Підтримка клієнтів
For technical assistance, troubleshooting, or warranty claims, please contact InSinkErator Customer Support. Contact information can typically be found on the manufacturer's webсайті або в упаковці вашого продукту.
Інтернет-ресурси: Visit the official InSinkErator webсайт із поширеними запитаннями, реєстрацією продукту та додатковими допоміжними матеріалами.